User Panel
|
www.TBCGroup.us
|
Guys, I am completely blown away by retro arms pin and weld job. At first I though he just sent it back to me without doing any work .
Attached File |
|
No one is coming. It's up to us.
|
Originally Posted By jmevans_2: Guys, I am completely blown away by retro arms pin and weld job. At first I though he just sent it back to me without doing any work . https://www.ar15.com/media/mediaFiles/311399/PXL_20220207_215301307_jpg-2270986.JPG View Quote I just sent mine out for him to do. He does great work. |
|
|
|
|
No one is coming. It's up to us.
|
|
Originally Posted By jmevans_2: Pretty happy with this setup. Can't wait to get on paper this weekend. https://www.ar15.com/media/mediaFiles/311399/PXL_20220208_025944203_3_jpg-2271099.JPG View Quote Some fire builds in here lately, this is one. |
|
|
|
Originally Posted By RichieRich562: Decisions... https://i.imgur.com/jIK4gsi.jpg https://i.imgur.com/8MlALZB.jpg View Quote Throw an rmr on top of that G mount and its a pretty easy decision. |
|
|
Attached File
I really want my RC2....this gun is so fun. I need to shoot more to decide if I want to switch the LPVO out for a T1 and magnifier, though. |
|
Does this smell like chloroform to you?
|
Originally Posted By Blanco_Diablo: https://www.ar15.com/media/mediaFiles/68140/20220209_161437_jpg-2273146.JPG I really want my RC2....this gun is so fun. I need to shoot more to decide if I want to switch the LPVO out for a T1 and magnifier, though. View Quote What rmr mount are you using there? |
|
|
Originally Posted By Blanco_Diablo: https://www.ar15.com/media/mediaFiles/68140/20220209_161437_jpg-2273146.JPG I really want my RC2....this gun is so fun. I need to shoot more to decide if I want to switch the LPVO out for a T1 and magnifier, though. View Quote Leave that one like that. Put T1 on the 11.5 build you are going to do next. |
|
Do not take life too seriously. You will never get out of it alive.
"my arms are so fucking enormous , come to me please." -sksAL 8-29-15 |
Originally Posted By HammerForged: Leave that one like that. Put T1 on the 11.5 build you are going to do next. View Quote View All Quotes View All Quotes Originally Posted By HammerForged: Leave that one like that. Put T1 on the 11.5 build you are going to do next. Don't tempt me with a good time.... Originally Posted By UndrGrndPrdcts: What rmr mount are you using there? Trijicon. |
|
Does this smell like chloroform to you?
|
|
Originally Posted By StealthGuy: Anyone have or know where to get the correct Colt ambi safety? https://i.imgur.com/VIaYA0s.jpg View Quote https://www.brownells.com/rifle-parts/safety-parts/safeties/ambidextrous-safety-selelctor-lever-full-auto-prod70968.aspx |
|
|
Originally Posted By FONTY: https://www.brownells.com/rifle-parts/safety-parts/safeties/ambidextrous-safety-selelctor-lever-full-auto-prod70968.aspx View Quote Same with arms unlimited. |
|
|
View Quote Damn it. I ordered one last week and haven't yet opened the package. |
|
|
|
|
|
View Quote Because I don't really like them. |
|
|
Arms Unlimited. Full auto selector, just use a file and file the nub down to make it semi auto. I have 4 or 5 of them I need to file down this weekend.
https://www.armsunlimited.com/Colt-M16-3-Position-Ambidextrous-Safety-Selector-p/sp400024.htm |
|
|
|
|
|
Originally Posted By JLAudio: Arms Unlimited. Full auto selector, just use a file and file the nub down to make it semi auto. I have 4 or 5 of them I need to file down this weekend. https://www.armsunlimited.com/Colt-M16-3-Position-Ambidextrous-Safety-Selector-p/sp400024.htm View Quote Sounds easy enough. Ordered. Thanks. |
|
|
|
|
|
|
Originally Posted By BePhreed: Opened tonight. Ordered from Brownells a week or so ago. https://www.ar15.com/media/mediaFiles/170190/B7066982-2FB8-42EE-AE22-247C47674476_jpe-2274825.JPG View Quote I figured that was a screw up on the Q&A on Brownells site, Thanks. Edit- I ordered 2 from Brownells after my buddy got screwed from AU and they were correct. I haven’t seen or heard of any Colt ambi coming with 2 long levers from Brownells. |
|
|
Originally Posted By FONTY: I figured that was a screw up on the Q&A on Brownells site, Thanks. Edit- I ordered 2 from Brownells after my buddy got screwed from AU and they were correct. I haven’t seen or heard of any Colt ambi coming with 2 long levers from Brownells. View Quote Glad to hear. Regarding AU, I've heard pretty hit and miss reviews about products as advertised(especially Colt) arriving to patrons. |
|
|
AU has been good to me. I've bought some rare things from them without knowing what to expect. Best example is a Colt M16A1 retro reissue lower they split from a full gun and randomly posted on their website without pictures.
The safeties via the link I posted are GTG. The last 2 from Brownells i ordered have a F stamp on the face of them. The last 4 from AU do not but are clearly Schmid parts with the S. Odd seeing Colt parts with a F stamp on them? |
|
|
Has anyone seen the new m231 eotech on these yet? Got a couple from a well connected friend; and thinking about building one of these if they’re correct for the URGI. Seems like that eotech contract is pretty new.
|
|
|
Originally Posted By BePhreed: Opened tonight. Ordered from Brownells a week or so ago. https://www.ar15.com/media/mediaFiles/170190/B7066982-2FB8-42EE-AE22-247C47674476_jpe-2274825.JPG View Quote That’s good to know. |
|
|
Originally Posted By grantw12: Has anyone seen the new m231 eotech on these yet? Got a couple from a well connected friend; and thinking about building one of these if they’re correct for the URGI. Seems like that eotech contract is pretty new. View Quote Never heard of it, not finding anything on google. What’s the new m231 Eotech? |
|
Not a Tennessee Squire
|
So is the most clone correct suppressor available the RC2 now? Thinking that might be a good investment with my tax return..
|
|
|
Originally Posted By grantw12: Has anyone seen the new m231 eotech on these yet? Got a couple from a well connected friend; and thinking about building one of these if they’re correct for the URGI. Seems like that eotech contract is pretty new. View Quote Got any pictures of these? EOTechs have been in use for a while, now. |
|
|
|
Does this smell like chloroform to you?
|
Originally Posted By grantw12: https://i.ibb.co/cc2TMn4/8-EE2-F79-B-9-A80-41-B1-B28-D-B927-D4708955.jpg View Quote Serial M00207, need to try harder next time |
|
|
First link that pops up says Air Force 58th Rescue Squadron is requesting them.
https://govtribe.com/file/government-file/attachment-1-sow-dot-docx-21 ETA: It looks like it might just be an EXPS 3-0. Strange that they would give it another nomenclature when it already exists in the system. https://www.nsn-now.com/Indexing/ViewDetail.aspx?QString=1240015879345 |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: ETA: It looks like it might just be an EXPS 3-0. Strange that they would give it another nomenclature when it already exists in the system. https://www.nsn-now.com/Indexing/ViewDetail.aspx?QString=1240015879345[/b] View Quote It has a hole. |
|
|
Originally Posted By WTFShane: Originally Posted By SecretSquirell: ETA: It looks like it might just be an EXPS 3-0. Strange that they would give it another nomenclature when it already exists in the system. https://www.nsn-now.com/Indexing/ViewDetail.aspx?QString=1240015879345 It has a hole. I've got a drill. [/b] |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
From what I heard it's a fed contract optic.
|
|
IG @bayou_bengal-rifles
|
Hey guys, could use some advise. I got the DD barrel pinned assembly in and I’m simply trying to take out the half inserted taper pin out so I can put on the barrel nut. I’ve tried oil, heating it, and using nail pins to knock this thing out with some pretty hard strikes with the hammer. I’m mushrooming the nail pins. And now I am concerned I’m doing it wrong here. Anyone else run into this?
|
|
|
Originally Posted By bigde1ta: Hey guys, could use some advise. I got the DD barrel pinned assembly in and I’m simply trying to take out the half inserted taper pin out so I can put on the barrel nut. I’ve tried oil, heating it, and using nail pins to knock this thing out with some pretty hard strikes with the hammer. I’m mushrooming the nail pins. And now I am concerned I’m doing it wrong here. Anyone else run into this? View Quote Are you driving it from the correct (small) end? Do you have the gas block up against something very solid? |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Are you driving it from the correct (small) end? Do you have the gas block up against something very solid? View Quote I think so. The pin comes half way inside the gas block assembly. So I’m knocking it out from inside so hard to tell which is bigger. Assuming this is the smaller end of the pin as I would not think DD would send it fully seated. Put another way I am hammering the pin so that it would push out through the ejection port side. I’ve just never had so much trouble with a simple pin. |
|
|
On hard taper pins I have had to clamp the barrel on to a piece of hard wood and place everything on a concrete floor before using a big fucking hammer full force.
But I’ve never had to do that with a new factory barrel with the pin partially installed. |
|
|
Originally Posted By RobNC: On hard taper pins I have had to clamp the barrel on to a piece of hard wood and place everything on a concrete floor before using a big fucking hammer full force. But I’ve never had to do that with a new factory barrel with the pin partially installed. View Quote The pin was all the way to the end of the block. I’ll call it 75% in. Perhaps I just need to clamp it down and make sure the gas block is more secure. I’m using a multi surface AR block to hammer it on. Not my first rodeo with a pinned gas block either. I wish DD would just drill on his thing and keep the pin separate. Other manufacturers do that. Or maybe I just need to hit it with my purse! |
|
|
|
|
|
Originally Posted By julyAZ: Here, I'll help y'all to stop guessing. https://i.imgur.com/ovCTxQn_d.webp?maxwidth=640&shape=thumb&fidelity=medium https://i.imgur.com/zFTImn0_d.webp?maxwidth=640&shape=thumb&fidelity=medium I had a Eotech EXPS 2 I purchased from MidwayUSA a few years back with the same hole in the hood. I'm not a Eotech dude so I didn't realize it was unusual. Should've kept it, could've asked a premium now lol. View Quote It's actually a good idea IMO. |
|
|
https://flic.kr/p/2n3w22z
|
|
|
Without going back and reading through this whole thread, did the URGI officially get adopted? I remember a few years ago I saw some controversy regarding adoption.
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.