User Panel
Posted: 12/28/2020 11:20:02 AM EDT
I like the way the nickel boron BCG's look, and like the way many people say they clean up easily.
So looking to replace my black nitride Aero Precision BCG with something else... Should I get: 1. Aero Precision - Not sure who makes them or coats them for Aero? 2. Toolcraft 3. WMD 4. FailZero 5. Something else? I see a lot of Toolcraft vs. WMD vs. FailZero BCG comparisons... my general observation is they are all about equal. Is this true? Is there any reason to get (or not get) one of these BCG in nickel boron, or would any of these listed be good to go? I think I read somewhere that WMD, or one of those manufacturers?, are the ones that invented nickel boron coating or something, so would that be the best to go with soley for that reason? All on this list are priced under $200, so not looking to spend more than that - as I have no need for a "more expensive" BCG. Thanks. |
|
[#2]
Cannot go wrong with FailZero or WMD. Toolcraft is never a bad option, but they didn't pioneer NiB like FailZero and WMD.
NiB used to be all the craze a few years back, but it has been proven to be inferior over the long run. NiB isn't bad, but they have had amazing marketing since release. I would put DLC above NiB any days (it's also cheaper). NiB has notoriously had issues with not being great for wear. It changes color over time (stains) to a dirty version of what you get in the box. I highly recommend either DLC, NP3+, or Lifecoat over NiB. Technically, I prefer nitride/isonite/melonite over NiB. |
|
[#4]
If you're buying it for looks, you're buying it for the wrong reason IMO.
|
|
[#5]
AIM Surplus NIB is also a good BCG. Not as polished as Toolcraft, Fail Zero, or WMD, but it is well made. That said my Toolcraft NIB is the smoothest cycling BCG I own.
|
|
[#6]
If I were going to buy a Nickel Boron BCG it would be the one from Cryptic Coatings, because as far as I know it's the only one that is chromed inside the carrier itself as well as the gas key... NiB finish is well known to flake off in those areas, as well as the ramp on the bottom of the carrier where the hammer makes contact.
Having said that I don't recommend NiB BCGs and would sooner go with standard phosphate and chrome. |
|
[#8]
|
|
[#10]
I like spinta precison, have a few and one with a few thousand rounds.
No issues at all |
|
[#11]
|
|
[#12]
Quoted: Cannot go wrong with FailZero or WMD. Toolcraft is never a bad option, but they didn't pioneer NiB like FailZero and WMD. NiB used to be all the craze a few years back, but it has been proven to be inferior over the long run. NiB isn't bad, but they have had amazing marketing since release. I would put DLC above NiB any days (it's also cheaper). NiB has notoriously had issues with not being great for wear. It changes color over time (stains) to a dirty version of what you get in the box. I highly recommend either DLC, NP3+, or Lifecoat over NiB. Technically, I prefer nitride/isonite/melonite over NiB. View Quote Interesting... I haven’t heard that before, nor have I done of research into NiB]I didn’t think there were really any downsides but I’ll have to look into that. Do any if the same brands I listed make BCGs in any of the finishes you listed? How do those finish costs compare to black nitride or NiB? |
|
[#13]
Quoted: I mean, I get that but understand NiB to be a solid choice for a BCG with no real downsides... other than what someone said above. View Quote View All Quotes View All Quotes Quoted: Quoted: If you're buying it for looks, you're buying it for the wrong reason IMO. I mean, I get that but understand NiB to be a solid choice for a BCG with no real downsides... other than what someone said above. Nitride is nearly as slick/easy to clean as NiB and will not stain. Something to consider. |
|
[#14]
I run Failzeros and love them. Reliable as hell and super easy to clean. As far as the staining, I think they look better once they're "broken in"
I have heard great things about nitride coating too (somehow it's both better AND cheaper), but haven't run any nitride coated gear yet so can't offer any experience based input. |
|
[#15]
Aim bcg are made by tool craft. I bought one of their bcg with the nitride bolt and nickel carrier and got the best of both worlds. A good nitrided bcg cleans up easier than nickel. Nickel especially the bolt stains and will turn yellow but they are all good and ultimately you are buying nickel for looks.
You will honestly spend more time cleaning a nickeled bcg because fouling shows up more but it looks bad ass with a stainless barrel. |
|
[#16]
Quoted: I have heard great things about nitride coating too (somehow it's both better AND cheaper), but haven't run any nitride coated gear yet so can't offer any experience based input. View Quote Nitriding is a process which alters the steel exterior also penetrating sub level, not a coating as many think. |
|
[#18]
https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html
If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. |
|
[#19]
Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. View Quote HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. |
|
[#21]
I tried a NiB TC on a rifle a couple years ago just to see what the hoopla was all about. . I have a bazillion rounds through it(Probably more than any of my other guns combined) and it cleans up easy. Looks as good as the day I bought it. With that being said, all my other standard TCs have never given me an issue.
|
|
[#22]
Quoted: Interesting... I haven’t heard that before, nor have I done of research into NiB]I didn’t think there were really any downsides but I’ll have to look into that. Do any if the same brands I listed make BCGs in any of the finishes you listed? How do those finish costs compare to black nitride or NiB? View Quote I first started getting into building several years back right when I got discharged from the Army. I started buying NiB parts because of the "hey look, you don't need to clean or oil". Total hoopla. I found that the marketed the coated as the " next big thing" and new builders or people looking to modify their builds get hook line and sinkers with NiB like I did. In all reality, it is a coating like pvd ti nitride, DLC, etc. I guess you can say it's slick, but is it better than the others? I don't think so. It's decent for cleanup, but not better than DLC or NP3+ in my opinion. There are many manufacturers that have their stuff electroless nickel/teflon coated that is about the same as NiB. There are many different names for it. Melonite/nitride/isonite are a dime a dozen, as nearly every manufacturer carries these and is probably the cheapest treatment of them all besides phosphate. Chrome is less the craze than it once was and is pretty uncommon these days (LMT, DD, RRA) . DLC or other pvd carries are pretty common (Toolcraft, Sharps, Cryptek, Midwest Industries) ti-nitride being the most common. Everyone has phosphate. Electroless nickel/teflon is uncommon but you can find them (Adams Arms/VDI, PWS, POF). I just named a few companies. There are obviously more. |
|
[#23]
Phosphate holds the lube best, hard chrome is the best for bolt and internal.
Prove me wrong |
|
[#25]
A good read for why good NiB makes sense (and its not about appearance):
https://www.failzero.com/fz-news/item/failzero-outperforms-legacy-systems-in-dept-of-energy-live-fire-tests.html This is full auto torture testing to failure under extreme conditions, including water and sand. |
|
[#26]
View Quote View All Quotes View All Quotes Quoted: Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. The pic of the DD BCG in the VT Supply link looks like a semi carrier. I don't know if DD ever made chrome semi BCGs. I'd probably contact them to verify before purchase. |
|
[#27]
Quoted: The pic of the DD BCG in the VT Supply link looks like a semi carrier. I don't know if DD ever made chrome semi BCGs. I'd probably contact them to verify before purchase. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. The pic of the DD BCG in the VT Supply link looks like a semi carrier. I don't know if DD ever made chrome semi BCGs. I'd probably contact them to verify before purchase. Info states M16 carrier. Pic does look fuckey tho. |
|
[#28]
I do like the silver color of the NiB which makes it stand out a little but...
I do get they may not offer much real world advantage over nitride, etc. The DD chrome one looks interesting... anything else out there to consider or just go NiB and be fine with it? |
|
[#29]
Quoted: I do like the silver color of the NiB which makes it stand out a little but... I do get they may not offer much real world advantage over nitride, etc. The DD chrome one looks interesting... anything else out there to consider or just go NiB and be fine with it? View Quote http://sionicsweaponsystems.com/store2015/bolt-carrier-group-components/31-bolt-carrier-group-np3-coated-carrier-bolt-and-cam-pin.html |
|
[#30]
Aim has them in stock right now if you want to get an actual bcg rather than a back order.
|
|
[#31]
Here is a new alternative. Precision Firearms.
They are starting to make them inhouse. And doing a presale So $70 for the BC, pre 2/1, the $110. That is BC only, there are BCG options also. https://www.precisionfirearms.com/m8/PF%20Carrier%20-%20%2A%2ANO%20BOLT%2A%2A%20CARRIER%20ONLY--pf-carrier-no-bolt-carrier-only.html |
|
[#32]
idk if anyone said it yet, but if you like the look but want reliability get a chromed BCG.
|
|
[#33]
Quoted: idk if anyone said it yet, but if you like the look but want reliability get a chromed BCG. View Quote Haven't seen or heard much about chrome BCG... i'll have to look into them - any brands you recommend checking out? Still am leaning heavily toward a NB BCG from one of the brands in my original post. Right now - leaning towards WMD since they have a "better" coating and one of the original's I do believe... The problem is finding them in stock! |
|
[#34]
Quoted: Haven't seen or heard much about chrome BCG... i'll have to look into them - any brands you recommend checking out? Still am leaning heavily toward a NB BCG from one of the brands in my original post. Right now - leaning towards WMD since they have a "better" coating and one of the original's I do believe... The problem is finding them in stock! View Quote DD makes a great chrome BCG. https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html |
|
[#35]
View Quote View All Quotes View All Quotes Quoted: Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. Does Young Mfg still offer hard chrome BCGs? |
|
[#36]
Quoted: DD makes a great chrome BCG. https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html View Quote Wow interesting, priced just above nickel boron too... too bad they aren’t in stock! I might opt for this over nb, but availability 0f both is an issue so maybe will buy whatever is first in stock... |
|
[#37]
Look into Rubber City Armory. They manufacture bolts for other big brand names but also sell their own. They are highly respected. They show as of yesterday they had some BCGs in stock and are under 200.00 I hope this helps.
|
|
[#39]
View Quote View All Quotes View All Quotes Quoted: Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. @Tigwelder1971 Is Valhalla Tactical Supply legit? Saw mixed reviews on Reddit (arfcom google search is jacked now) |
|
[#40]
Quoted: @Tigwelder1971 Is Valhalla Tactical Supply legit? Saw mixed reviews on Reddit (arfcom google search is jacked now) View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: https://danieldefense.com/complete-bolt-carrier-group-chrome-plated-5-56mm.html If you decide against NiB, here's another option. A few places carry them, I think I got mine from Arm or Ally. Yeah, I know, good luck finding them in stock. I've done well with getting on notify lists, you just need to be ready to buy right now when you get the back in stock notification. HERE Damn solid BCGs. LMT in hard chrome is as well. Semi cut carrier only, IIRC. @Tigwelder1971 Is Valhalla Tactical Supply legit? Saw mixed reviews on Reddit (arfcom google search is jacked now) @PointBlank82 I've used them 4 or 5 times w/o issue now. IMO, they have been gtg. |
|
[#41]
I'm running nickel boron Sharp's relia Bolt bcg and she's been a dream
|
|
[#42]
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.