User Panel
[#1]
Originally Posted By redwoodm4: Posted this in general discussion yesterday, probably better here. Anyone have experience with lmt enhanced bcg in 14.5 mid Daniel Defense or 14.5 mid LMT. Have two 14.5 builds going and trying to decide which one to put it in. Hope the consensus is not my mileage may vary. View Quote The mid length is doing what the enhanced BCG was designed to do in this case. I probably wouldn't run both as you may be under gassed, unless you're running suppressed. |
|
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
|
[#2]
Originally Posted By jtdam24: Literally my single favorite rifle. The only thing I will be changing are the optics. I want a LPVO like a March 1-10x, NX8 1-8x, or Trijicon Credo 1-8x. Wherever I land I'll run an rmr with it (either offset or 12 o'clock on top of the optic). Most likely it'll sit in a Badger Ordnance C1. https://i.imgur.com/mGddGpU.jpg View Quote @jtdam24 is that a specwar? 12.5 barrel? It looks great, can you post more pictures? |
|
|
[#3]
Can someone knowledgeable tell me which of the available (in stock) BCGs on the Primary Arms website would be suitable for the LMT MWS?
Primary Arms - 308 BCGs At least in the short term, until an LMT BCG appears again. Thanks |
|
|
[#4]
Originally Posted By Sniper3142: Can someone knowledgeable tell me which of the available (in stock) BCGs on the Primary Arms website would be suitable for the LMT MWS? Primary Arms - 308 BCGs At least in the short term, until an LMT BCG appears again. Thanks View Quote Two options in my opinion are the KAK BCG d wilson mfg carries until an LMT BCG pops up(then the KAK becomes a nice backup) or the LMT built, but SOLGW branded BCG on SOLGW’s website. Good luck. |
|
|
[#5]
|
|
|
[#6]
Originally Posted By joesrcool: https://www.ar15.com/media/mediaFiles/179240/20220529_155551_jpg-2401076.JPG View Quote Curious how you feel about that 13.5 MARS-H? |
|
|
[#7]
Originally Posted By Super_Trouper: Curious how you feel about that 13.5 MARS-H? View Quote So far I love it. Far more accurate than the Aero M5 I had. 800 yards repeatedly was easy. Had issues connecting at 1100 yards. I went with the LW stainless 13.5 barrel, and had to SBR it due to the brake not making it to 16in. |
|
|
[#8]
Thought y’all would appreciate this.
Interview with Karl Lewis, LMT |
|
|
[#9]
Originally Posted By Outrider: Thought y’all would appreciate this. https://www.youtube.com/watch?v=p-kSpKYr-Kw View Quote Yes thank you, much appreciated. I have been waiting for this one a long time. |
|
|
[#10]
Originally Posted By Sniper3142: Can someone knowledgeable tell me which of the available (in stock) BCGs on the Primary Arms website would be suitable for the LMT MWS? Primary Arms - 308 BCGs At least in the short term, until an LMT BCG appears again. Thanks View Quote There are some LMT 308 BCGs in the EE at this moment. |
|
|
[#11]
|
|
|
[Last Edit: M4A1]
[#12]
Nice happy switch
Is that the 13.5 inch .308 or a custom length? |
|
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
|
[Last Edit: unclemoak]
[#13]
|
|
|
[#14]
That is one impressive build.
What made you go 12inch? Just to reduce overall all length? How far can you stretch that out to? |
|
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
|
[#15]
|
|
|
[#16]
|
|
|
[#17]
Originally Posted By emtothedee: While I acknowledge this is a three shot group, I’m stoked to see the how the hodge barreled mlr upper is starting to shoot. https://i.vgy.me/ZMFkKw.jpg View Quote Nice shooting bro |
|
|
[Last Edit: Radiant]
[#18]
10.5" 300 blk barrel on a 9.25" CQB MRP upper with a surefire socom rc2, decked out with FCD parts etc 🦆
https://m.youtube.com/watch?v=KZwfF-c9EoQ&lc=UgyQ69_zpf6vwwG8Bm14AaABAg |
|
|
[#19]
|
|
|
[#20]
|
|
Instagram : SoFlaNick
|
[#21]
View Quote 12.5" barrel? |
|
|
[#22]
Finally received the backordered LaRue RMR offset ring-half. I think all that's left to do with this build is a short LM8 rail section and a QD bipod.
Attached File Attached File |
|
|
[Last Edit: slipjett]
[#23]
|
|
|
[#24]
Originally Posted By slipjett: Specwar got a chunky twin, Quadwar according to d wilson(unclemoak) magic… https://flic.kr/p/2nzMGVn https://flic.kr/p/2nzEa2P ETA: oops, I’ll try to reload the pics via my pc later View Quote I got you... Attached File Attached File |
|
|
[#25]
|
|
|
[#26]
Originally Posted By joesrcool: I got you... https://www.ar15.com/media/mediaFiles/179240/52233073677_398cc5367e_k_jpg-2462164.JPG https://www.ar15.com/media/mediaFiles/179240/52234546735_e5f0402892_k_jpg-2462165.JPG View Quote Is your barrel cut down from a 10.5? |
|
|
[#27]
|
|
|
[Last Edit: slipjett]
[#28]
Originally Posted By joesrcool: Those two aren't mine. I was just helping @slipjett with is pictures. View Quote View All Quotes View All Quotes Originally Posted By joesrcool: Originally Posted By Trapper1895: Is your barrel cut down from a 10.5? Those two aren't mine. I was just helping @slipjett with is pictures. Thanks @joesrcool And @Trapper1895, those are two 12.5” barrels, one nestled in a Specwar upper and one cut down rifle length quadrail dubbed the “Quadwar” by none other than d. Wilson(@unclemoak). |
|
|
[#29]
|
|
|
[Last Edit: kc3]
[#30]
What’s the difference between LM8 and SLK uppers?
Also, what barrels were used with the 7.25 LM8 upper? Thanks! |
|
|
[#31]
|
|
|
[#32]
Does anyone have any pics of any 13.7 builds? Shovelnose 13.7?
|
|
|
[#33]
Originally Posted By joesrcool: https://www.ar15.com/media/mediaFiles/179240/20220722_111139_jpg-2462174.JPG View Quote |
|
|
[#34]
Someone mentioned that LMT announced during a recent podcast that the MLR upper was discontinued. Any one else hear this? Sold a CQB upper 9+ months ago and have been waiting to replace it with MLR...
|
|
|
[#35]
Originally Posted By MKEman: Someone mentioned that LMT announced during a recent podcast that the MLR upper was discontinued. Any one else hear this? Sold a CQB upper 9+ months ago and have been waiting to replace it with MLR... View Quote That doesn’t make any sense. Everyone has moved to MLok as the primary forearm type. It’s also still listed on their website. |
|
|
[#36]
Originally Posted By Tengo1: That doesn’t make any sense. Everyone has moved to MLok as the primary forearm type. It’s also still listed on their website. View Quote It doesn't. However. I would hazard a guess that the CQB uppers sell far more often than the MLR uppers with the current pistol heavy sales craze going on. They may also not have any contracts for MLR uppers versus the CQB, Spec war and other variants that they offer. If the ATF goes full retard come december, I would imagine the MLR uppers might sell better. Can anyone confirm from the horses mouth? |
|
|
[#37]
the specwar is made by chopping off the front of the mlr. its the same forging.
|
|
|
[#38]
Originally Posted By ews: the specwar is made by chopping off the front of the mlr. its the same forging. View Quote Not sure where you heard/read that, but I’m looking at a specwar and mlr upper right now and if one were to chop an mlr in front of the T43 mark(the end of the specwar), there would be open slots around the entire front end. |
|
|
[#39]
Originally Posted By slipjett: Not sure where you heard/read that, but I’m looking at a specwar and mlr upper right now and if one were to chop an mlr in front of the T43 mark(the end of the specwar), there would be open slots around the entire front end. View Quote Its a different machine code for the CNC but its the same forging. The Mlok slots are cut into the forging, they're not there from the forge process. |
|
|
[#40]
Originally Posted By Magsz18: Its a different machine code for the CNC but its the same forging. The Mlok slots are cut into the forging, they're not there from the forge process. View Quote I get it now, just sounded like d wilson’s cutting of a mrp 13,25” down to specwar length when reading it. |
|
|
[#41]
Wasn't the Specwar also supposed to have a larger inner diameter?
I remember seeing people with MLC uppers having issues with the upper making contact with the barrel/gasblock because of the thin profile of the MLC. Then I remember reading somewhere (I think it was even directly on LMT's website) that the OD of the Specwar was larger meaning you didn't have to take off MLOK accessories when changing barrels. I might be misinterpreting the whole same forging thing though. |
|
|
[#42]
Originally Posted By waddlingweezol: Wasn't the Specwar also supposed to have a larger inner diameter? ... Then I remember reading somewhere (I think it was even directly on LMT's website) that the OD of the Specwar was larger meaning you didn't have to take off MLOK accessories when changing barrels. View Quote shovelnose and csw have the larger diameter |
|
|
[Last Edit: AZ2A]
[#43]
|
|
|
[#45]
Shovelnose uppers and mrp uppers in stock at big Tex ordnance if you aren’t on their email list.
|
|
|
[#46]
Originally Posted By joesrcool: https://www.ar15.com/media/mediaFiles/179240/20220722_111139_jpg-2462174.JPG View Quote Nice |
|
|
[#47]
Originally Posted By SoFlaNick: @Peg-Leg-Pete I don't have a shovelnose, sorry. Here is a 13.7 noveske I put on MRP. It's a little heavy, but has served me well in several RNG and 2gun matches nationwide. This was from a RNG recently where I took 2/83 overall, 1/83 shooting, 13/83 running. https://www.ar15.com/media/mediaFiles/489439/52244819881_fa89fb43d9_k-2483667.jpg here is the same gun with a 13.9 6.5 Grendel. https://www.ar15.com/media/mediaFiles/489439/grendel-2433614.jpg View Quote Thanks for getting back to me, those look great. |
|
|
[#48]
View Quote People just going to ignore this photo I guess |
|
|
[#49]
|
|
|
[#50]
Hey y'all.
I was wondering what kind of logic LMT has in their serial numbers. I figured the Mars-l has a LXSXXXXXX no, whereas the MWS LHSXXXXXX. However, I've recently come across a rifle that was marked LMSXXXXXX. Any idea why they're different? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.