Member Login
Member Login
Member Login
|
Posted: 1/6/2021 10:40:48 AM EST
[Last Edit: 1/6/2021 10:43:22 AM EST by AWZ1287]
I ordered a arisaka indexer, but after installing my handguard I realized that the screw placement is not going to work. The gas block is preventing the second screw from locking in.
The arisaka indexer was perfect size. I want to put a stop in the last slot to prevent my fingers from going too far forward, being the handguard is close to the end of the barrel. Anyone have a recommendation for a handstop that would work with this slot?  Attached File |
|
|
|
|
Posted: 1/6/2021 11:17:10 AM EST
I know it is cheap but the UTG has become my favorite. Fits and feels great.
 |
|
|
|
|
Posted: 1/6/2021 12:40:00 PM EST
The dimensions might not allow it to work, but you could mill a partial slot towards the muzzle just large enough for the forward mounting screw. Drill and a round file would work. Structural strength could be a concern.
|
|
|
|
|
Posted: 1/6/2021 12:53:43 PM EST
Take a look at the magpul mlok handstop kit. Maybe you can use parts of it to make something work.
|
|
|
|
|
Posted: 1/6/2021 1:00:34 PM EST
[Last Edit: 1/6/2021 1:03:38 PM EST by AWZ1287]
Quote HistoryOriginally Posted By SScot: I know it is cheap but the UTG has become my favorite. Fits and feels great. https://op1.0ps.us/978-550-ffffff-no-upscale/opplanet-leapers-utg-ultra-slim-m-lok-handstop-mcimage-spids-94818-100961-94814-vids.jpg This looks like it might work. |
|
|
|
|
Posted: 1/6/2021 1:01:32 PM EST
Quote History Originally Posted By ARnTN: Take a look at the magpul mlok handstop kit. Maybe you can use parts of it to make something work. I will look into the magpul set. |
|
|
|
|
Posted: 1/6/2021 1:02:00 PM EST
Quote History Originally Posted By AWZ1287: This looks like it might work.  |
|
|
|
|
Posted: 1/6/2021 1:08:33 PM EST
Quote History Originally Posted By SScot: I used it on one for the same reason as you and it worked well. https://i.imgur.com/SOjThJL.jpg The offset screw should line up perfectly. There is some clearance under the gas block, the screw tab is just barely too tall. |
|
|
|
|
Posted: 1/6/2021 1:09:24 PM EST
Quote History Originally Posted By AWZ1287: The offset screw should line up perfectly. There is some clearance under the gas block, the screw tab is just barely too tall. |
|
|
|
MA, USA
|
Posted: 1/6/2021 8:19:52 PM EST
I really like the railscales one - I believe it is single screw but unfortunately it is out of stock at the moment, but I plan on buying more when they are available:
https://railscales.us/karve-hand-stop/ |
|
|
|
Posted: 1/6/2021 8:46:07 PM EST
Are you able to just shorten your second screw by cutting it down with a dremel, or is the Mlok nut itself interfering? I've trimmed Mlok screws with success to fit in tight places.
|
|
|
|
|
Posted: 1/7/2021 9:43:25 AM EST
Quote History Originally Posted By Hox: Are you able to just shorten your second screw by cutting it down with a dremel, or is the Mlok nut itself interfering? I've trimmed Mlok screws with success to fit in tight places. It's the nut itself. |
|
|
|
AR15.COM is the world’s largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2021 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
