Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 8/15/2020 2:05:38 PM EST
Looking to upgrade the trigger on my Colt Sporter Pre-Ban and need the large pin (.169") SSA-E trigger that also fits the original sear block.

Not finding a large pin model in stock.  Anyone have a spare one sitting around or have a lead on one?


Link Posted: 8/15/2020 2:08:49 PM EST
[Last Edit: 8/15/2020 2:09:56 PM EST by wildearp]
I had a similar issue finding large pin things.  I picked the Elftmann and it is one sweet trigger.

I found it on Optics Planet.  With a sale and a discount code, it can be a pretty good deal.

I lave a large pin JP speed hammer/trigger/pins/springs leftover from that one if it interests you.  Just cover the shipping.
Link Posted: 8/15/2020 2:26:22 PM EST
Thanks for the quick response. Just to confirm, you installed this trigger with your sear block still in place?

My factory Colt trigger has a portion of the after trigger tail removed from one side in order to fit in the opening cut in the sear block.  Beside the large pin size, the trigger must also fit in the sear block.

If so, I'll place the order right away.


Link Posted: 8/15/2020 3:13:10 PM EST
Sorry, no sear block to reference.  Cut it out.
Link Posted: 9/2/2020 11:04:13 AM EST
Bump to see if anyone else may have a SSA-E large pin trigger available.

Link Posted: 11/21/2020 2:46:37 PM EST
I installed 2 in early 90's Sporters.  The Geiselle website used to state that sear blocks did not need to be removed.  It probably still does say that.

I cut the tops of my sear blocks off so that I could use a standard BCG.  There was no problem installing the Geiselle triggers and I don't see how there would have been a problem if I had not cut the tops off.

Sorry no spares.

Attachment Attached File
Top Top