Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Page / 78
Link Posted: 1/19/2021 1:33:53 PM EST
cOLlEcT tHe WhOlE sEt

Link Posted: 1/19/2021 2:00:33 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
cOLlEcT tHe WhOlE sEt

https://i.postimg.cc/8k3vzygn/PXL-20210119-183055602-2.jpg
View Quote


Link Posted: 1/19/2021 2:15:22 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
cOLlEcT tHe WhOlE sEt

https://i.postimg.cc/8k3vzygn/PXL-20210119-183055602-2.jpg
View Quote

Those FSB cuts are fire.
Link Posted: 1/19/2021 2:33:01 PM EST
Finally got my mk5

Attachment Attached File
Link Posted: 1/19/2021 2:34:56 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SDMF_Rebel:


Molyresin or bust

Molyresin, when baking, makes the house smell like a vinyl based chemical accident.

Think cheap chinese blow up pool toy smell, x20.
View Quote


Attachment Attached File
Link Posted: 1/19/2021 7:06:47 PM EST
@CMCctx my messenger is screwing up idk

The riser is a super solid fit, snaps into place nicely.

I tried it on my holland upper and it was a smidge to high. 1.7 rings would be tits with the recce rail and the cheek riser.

On the carbine, the irons are impossible to use....  LOL
Link Posted: 1/19/2021 7:20:17 PM EST
Discussion ForumsJump to Quoted PostQuote History
View Quote

Has a mini-110 look going on.
Link Posted: 1/19/2021 7:21:18 PM EST
20210119_150846 by brandon hobock, on Flickr" />

20210119_151008 by brandon hobock, on Flickr" />

20210119_152534 by brandon hobock, on Flickr" />


I have an aimpoint gooseneck on the way. With the cheek peice i wanna run it super high. Im thinking of running the same mount it has with the gooseneck, but im slightly worried about throwing it off zero when it gets bumped around in the back of the jeep.
The other 2 options are the carry handle t1 mount (i believe to be discontinued?) Or the t1 low mount on the carry handle pic rail. (Least favorite, unless old-school red dot)
Link Posted: 1/19/2021 8:00:59 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SecretSquirell:

Has a mini-110 look going on.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SecretSquirell:

Has a mini-110 look going on.


Exact thing I was going for
Link Posted: 1/19/2021 8:57:29 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SDMF_Rebel:


Molyresin or bust

Molyresin, when baking, makes the house smell like a vinyl based chemical accident.

Think cheap chinese blow up pool toy smell, x20.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SDMF_Rebel:
Originally Posted By Hydra-shokz:
Originally Posted By CMCctx:
Originally Posted By Hydra-shokz:


The kabobs are grateful.

Bruh if I'm anything, I'm resourceful! If anything comes up missing at my house, my wife never blames the kids. She knows there is absolutely a chance I bubba'd it for something.


I would have done the same thing. However, you need to move past rookie status and Cerakote a complete rifle in your wifes oven.


Molyresin or bust

Molyresin, when baking, makes the house smell like a vinyl based chemical accident.

Think cheap chinese blow up pool toy smell, x20.


I had to buy a new oven in 2009 after doing this.  I'm not kidding. Wife unit was beyond angry.
Link Posted: 1/19/2021 9:57:38 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brandonbeezy:
https://live.staticflickr.com/65535/50853919757_5a73ff228c_k.jpg20210119_150846 by brandon hobock, on Flickr" target="_blank">https://live.staticflickr.com/65535/50853919757_5a73ff228c_k.jpg20210119_150846 by brandon hobock, on Flickr

https://live.staticflickr.com/65535/50853923482_3922bad0d0_k.jpg20210119_151008 by brandon hobock, on Flickr" target="_blank">https://live.staticflickr.com/65535/50853923482_3922bad0d0_k.jpg20210119_151008 by brandon hobock, on Flickr

https://live.staticflickr.com/65535/50853930782_cdb1ff0021_k.jpg20210119_152534 by brandon hobock, on Flickr" target="_blank">https://live.staticflickr.com/65535/50853930782_cdb1ff0021_k.jpg20210119_152534 by brandon hobock, on Flickr


I have an aimpoint gooseneck on the way. With the cheek peice i wanna run it super high. Im thinking of running the same mount it has with the gooseneck, but im slightly worried about throwing it off zero when it gets bumped around in the back of the jeep.
The other 2 options are the carry handle t1 mount (i believe to be discontinued?) Or the t1 low mount on the carry handle pic rail. (Least favorite, unless old-school red dot)
View Quote

I doubt zero would be affected. I vote gooseneck!
Link Posted: 1/20/2021 12:17:29 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SDMF_Rebel:


Exact thing I was going for
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SDMF_Rebel:
Originally Posted By SecretSquirell:

Has a mini-110 look going on.


Exact thing I was going for


I heard mini m110



Last post before it gets coated and a Krieger from CLE. Probably gonna replace the lower with an ambi if I can get one close to retail.
Link Posted: 1/20/2021 8:41:03 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:


I heard mini m110

https://i.imgur.com/mU6GGGD.jpg

Last post before it gets coated and a Krieger from CLE. Probably gonna replace the lower with an ambi if I can get one close to retail.
View Quote


So sick.
Link Posted: 1/20/2021 8:54:52 AM EST
Could you mod an entry stock to fit that adjustable buttpad?
Link Posted: 1/20/2021 9:16:46 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brandonbeezy:
Could you mod an entry stock to fit that adjustable buttpad?
View Quote

I've been thinking about that for a long time. A few companies make an adjustable buttpad for shotguns that you file/grind to fit your particular firearm. I'm sure it would work fine, but I've never been able to find out the measurement between the screw points to see if it will fit an A1/A2/entry stock
Link Posted: 1/20/2021 9:57:22 AM EST
I need to stop, I just bought a DD M4a1 rail fully knowing I have no f’in clue what I’m putting it on. I’ve got a URX II & 3.1 that both don’t have builds yet. I’m thinking Wilson combat 11.3 for the II. The 3.1 I have no clue, maybe just throw it on my old 6.8 and turn that into GWOT deer slayer. But I still need to finish and test that A2 upper with an arms 51. And I still want to order a #59, we haven’t seen one of those in here have we? So many projects
Link Posted: 1/20/2021 9:57:22 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:

I've been thinking about that for a long time. A few companies make an adjustable buttpad for shotguns that you file/grind to fit your particular firearm. I'm sure it would work fine, but I've never been able to find out the measurement between the screw points to see if it will fit an A1/A2/entry stock
View Quote


I just can't rationalize spending 400+ on a stock to butcher it lol it'd end up on my "holland"
Link Posted: 1/20/2021 10:14:51 AM EST
ADCO said they would have more OPS/AE Style extended A1 in stock this month and I've checked twice every single day. No dice. I could always get a few more Smith Vortex, but I'm really hoping I didn't miss out on the ADCO restock and they just haven't put them out yet.

Then I just need a flat slip ring and the bastardized OGS can be rebuilt and put back in rotation.
Link Posted: 1/20/2021 12:05:59 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
ADCO said they would have more OPS/AE Style extended A1 in stock this month and I've checked twice every single day. No dice. I could always get a few more Smith Vortex, but I'm really hoping I didn't miss out on the ADCO restock and they just haven't put them out yet.

Then I just need a flat slip ring and the bastardized OGS can be rebuilt and put back in rotation.
View Quote



I need a collar and thread protector... and an aem5
Link Posted: 1/20/2021 12:24:15 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
ADCO said they would have more OPS/AE Style extended A1 in stock this month and I've checked twice every single day. No dice. I could always get a few more Smith Vortex, but I'm really hoping I didn't miss out on the ADCO restock and they just haven't put them out yet.

Then I just need a flat slip ring and the bastardized OGS can be rebuilt and put back in rotation.
View Quote


I don’t think you missed them.  I’ve been checking a couple of times a day as well.  

Link Posted: 1/20/2021 7:13:14 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:


I heard mini m110

https://i.imgur.com/mU6GGGD.jpg

Last post before it gets coated and a Krieger from CLE. Probably gonna replace the lower with an ambi if I can get one close to retail.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:
Originally Posted By SDMF_Rebel:
Originally Posted By SecretSquirell:

Has a mini-110 look going on.


Exact thing I was going for


I heard mini m110

https://i.imgur.com/mU6GGGD.jpg

Last post before it gets coated and a Krieger from CLE. Probably gonna replace the lower with an ambi if I can get one close to retail.

That a legit double pic gas block or a repro?
Link Posted: 1/20/2021 9:11:21 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SecretSquirell:

That a legit double pic gas block or a repro?
View Quote


Legit from op parts. It seems like they get them in stock every other month.
Link Posted: 1/20/2021 9:29:16 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:


Legit from op parts. It seems like they get them in stock every other month.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:
Originally Posted By SecretSquirell:

That a legit double pic gas block or a repro?


Legit from op parts. It seems like they get them in stock every other month.

Sweet. I was just surprised that someone dropped that much coin on a gb for non-KAC rifle.
Link Posted: 1/20/2021 10:09:36 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SecretSquirell:

Sweet. I was just surprised that someone dropped that much coin on a gb for non-KAC rifle.
View Quote


Gotta have it for the suppressor. I thought about an lpr upper but I was worried about the gas port location, muzzle threads weren't right, and the forward assist bothered me. TDP lower and KAC trigger was just cheaper than the ambi at the time.

I'm a little late to the sling train but what do you guys think of the quick cuff slings? It looks a little weird to wear.
Link Posted: 1/21/2021 7:14:55 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
ADCO said they would have more OPS/AE Style extended A1 in stock this month and I've checked twice every single day. No dice. I could always get a few more Smith Vortex, but I'm really hoping I didn't miss out on the ADCO restock and they just haven't put them out yet.

Then I just need a flat slip ring and the bastardized OGS can be rebuilt and put back in rotation.
View Quote


Steve is a good dude.  I'm sure if you ask nice enough he'll hold one for you.
Link Posted: 1/21/2021 11:21:08 AM EST
@bigbore I don't want to bug up ADCO's email inbox with the same annoying question, so answer if you want or tell me to fuck off and wait. Are we going to see OPS/AE Style extended A1 in stock in January?
Link Posted: 1/21/2021 6:25:15 PM EST
Link Posted: 1/21/2021 7:03:49 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bbridson:


Gotta have it for the suppressor. I thought about an lpr upper but I was worried about the gas port location, muzzle threads weren't right, and the forward assist bothered me. TDP lower and KAC trigger was just cheaper than the ambi at the time.

I'm a little late to the sling train but what do you guys think of the quick cuff slings? It looks a little weird to wear.
View Quote


Wait a minute. That thing will use the M110 can? Where can I find out more about this build?
Link Posted: 1/21/2021 8:13:58 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:


I’ll know tomorrow morning.  Honestly, I just completely forgot about them.
View Quote


Will you have collars too?
Link Posted: 1/21/2021 8:37:28 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brandonbeezy:


Will you have collars too?
View Quote

You looking for an M4 AEM5 collar? I could be wrong, but I don't think those are a production item since not all barrels are the same spec. Contacting Ron with measurements would be the best bet.
Link Posted: 1/21/2021 8:43:18 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:

You looking for an M4 AEM5 collar? I could be wrong, but I don't think those are a production item since not all barrels are the same spec. Contacting Ron with measurements would be the best bet.
View Quote


I did, he told me which measurements he needed, i sent them. No response, I emailed him i think yesterday or the day before, no response. This has been since the beginning of January.

Hes got a lot going on so I'm not bashing at all. Getting suppressors out and finding someone to take over are more important than 2 m4 collars.

Im just going to get an off the shelf spr collar and have the barrels re-profiled, no worries.
Link Posted: 1/21/2021 8:51:55 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brandonbeezy:


I did, he told me which measurements he needed, i sent them. No response, I emailed him i think yesterday or the day before, no response. This has been since the beginning of January.

Hes got a lot going on so I'm not bashing at all. Getting suppressors out and finding someone to take over are more important than 2 m4 collars.

Im just going to get an off the shelf spr collar and have the barrels re-profiled, no worries.
View Quote

Has anyone tried the Spike's collars? Might be worth a gamble to give those at least a try
Link Posted: 1/21/2021 8:52:27 PM EST
Link Posted: 1/21/2021 8:58:34 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:



email me in the AM.  I have a few laying around, but you'll have to go to the hardware store and buy the set screw.
View Quote


Will do! Thanks!
Link Posted: 1/21/2021 8:59:35 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:

Has anyone tried the Spike's collars? Might be worth a gamble to give those at least a try
View Quote


I wish i could find one of their tapered gas blocks...
Link Posted: 1/21/2021 9:14:02 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:



email me in the AM.  I have a few laying around, but you'll have to go to the hardware store and buy the set screw.
View Quote

@bigbore can I email you about some, too? I'll even make it easy and let you hold onto them until the A1 ops inc are ready to ship!
Link Posted: 1/21/2021 9:21:40 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brandonbeezy:


I wish i could find one of their tapered gas blocks...
View Quote

out of production, virtually impossible to find nowadays
Link Posted: 1/21/2021 9:31:57 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 5pt56:

out of production, virtually impossible to find nowadays
View Quote


I know, sad days, but not the end of the world
Link Posted: 1/21/2021 10:23:29 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:

Has anyone tried the Spike's collars? Might be worth a gamble to give those at least a try
View Quote

Attachment Attached File

Attachment Attached File

Link Posted: 1/21/2021 10:26:10 PM EST
I meant These
Link Posted: 1/21/2021 10:30:16 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CMCctx:
I meant These
View Quote

I bet those will work. Most of the spikes stuff seems to be interchangeable with AE cans. Worth a shot anyway.
Link Posted: 1/21/2021 10:44:21 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Rothperson87:

I bet those will work. Most of the spikes stuff seems to be interchangeable with AE cans. Worth a shot anyway.
View Quote

Thanks for that! I've been thinking about grabbing one of These for my 20". Might have a few more drinks and take the leap tonight! Worth a shot when the collars are only $18/each. At worst they wind up in the parts box for something down the road.
Link Posted: 1/22/2021 7:24:09 AM EST
Discussion ForumsJump to Quoted PostQuote History


Thats exactly what i was talking about though, so hows it look with the can and hand guard?

Link Posted: 1/22/2021 7:40:11 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:



email me in the AM.  I have a few laying around, but you'll have to go to the hardware store and buy the set screw.
View Quote


Email sent.
Link Posted: 1/22/2021 8:33:59 AM EST
Link Posted: 1/22/2021 11:38:08 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:



@CMCctx

in stock on the site now.
View Quote

ADCO out here doing the Lord's work
Link Posted: 1/22/2021 1:47:52 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bigbore:



@CMCctx

in stock on the site now.
View Quote


Out of stock not even 2 hours later
Link Posted: 1/22/2021 2:12:59 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By DackJaniels:


Out of stock not even 2 hours later
View Quote


The OPS is hot
Link Posted: 1/22/2021 7:03:01 PM EST
I was really close to waiting until lunch to order. Glad I didn't.
Link Posted: 1/22/2021 9:57:55 PM EST
2021-01-22_09-41-09 by brandon hobock, on Flickr" />

This grip is weird.
I installed it earlier right after work, shouldered it actually hated it, took the family to the frog leg festival (none of them have had frog legs or gator before), came home and started doing draws from the low ready. I figured out that my usual long length of pull sucked with this set up, so i shortened it up and found the second click from the receiver was the sweet spot for me. Freaking weird, but in hindsight the vertical grip actually pulls you closer to the gun so i felt stretched out.
Can't wait to get the red dot mounted. Should be as high as if it were mounted directly on the carry handle, but on the gooseneck. Idk if thats going to work out in my favor but im going for it.
Page / 78
Top Top