User Panel
[#1]
Will a CMMG MK3 lower parts kit work in an Aero M5 lower or am I better off finding an Aero kit?
|
|
[#2]
|
|
[#3]
I jumped on the AP M5 wagon about a month ago when i came across an upper and lower threaded set for $187 at the local gunshow. Way too good of a price to pass up. I almost bought two sets.
Found a 12" handguard for $100 on the EE, and a bear creek 20" nitride tube with rifle gas for $54 from PA. Im just waiting on the stock and glass to arrive to finish it off. Hopefully it will have its first shots next weekend. |
|
[#4]
Does the PRI Gen III handguard & SPR rail work with the M5? I can't find a definitive answer anywhere online. So what I've gathered so far is the Aero M5 is a .210" DPMS high equivalent. It has DPMS barrel but threads, and a 1.318" height from bore center line.
So would the right combination be to use the DPMS handguard with the correct barrel nut and the Armalite SPR rail for the correct rail height? |
|
[#5]
I just finished my 14.5 inch M5. Anyone having cycling issues??? Failure to feed/eject. Here are the build specs: Aero m5 matched set, aero BCG, 14.5 BA barrel, Surefire socom 2 with Surefire warden, seekins adjustable gas block, aero carbine buffer and carbine buffer spring. I don’t believe it is a gas issue. The warden adds plenty of back pressure and I have tried the gas block on several different setting.... any thoughts or recommendations?
|
|
[#6]
Quoted:
I just finished my 14.5 inch M5. Anyone having cycling issues??? Failure to feed/eject. Here are the build specs: Aero m5 matched set, aero BCG, 14.5 BA barrel, Surefire socom 2 with Surefire warden, seekins adjustable gas block, aero carbine buffer and carbine buffer spring. I don’t believe it is a gas issue. The warden adds plenty of back pressure and I have tried the gas block on several different setting.... any thoughts or recommendations? View Quote Long story short, I swapped the buffer tube out for an Armalite AR10 length tube (same as A5 length, allows the use of standard AR15 buffers), an AR15 carbine buffer, Tubb flat wire spring and KAK dual ejector BCG. Now it works. The KAK BCG solved the intermittent ejection malfunctions that it was still having with the Aero BCG. |
|
[#7]
Quoted:
Had the same issue with my 14.5 BA with those same parts. (You are using the short Aero 308 carbine buffer to start with, yes?) The 14.5 BA is very under gassed. The Aero buffer/spring combo is too strong. I figured this out because even with my adj gas block wide open, it wouldn't lock open on empty. However when I mounted a suppressor, it would run fine and lock on empty. Long story short, I swapped the buffer tube out for an Armalite AR10 length tube (same as A5 length, allows the use of standard AR15 buffers), an AR15 carbine buffer, Tubb flat wire spring and KAK dual ejector BCG. Now it works. The KAK BCG solved the intermittent ejection malfunctions that it was still having with the Aero BCG. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I just finished my 14.5 inch M5. Anyone having cycling issues??? Failure to feed/eject. Here are the build specs: Aero m5 matched set, aero BCG, 14.5 BA barrel, Surefire socom 2 with Surefire warden, seekins adjustable gas block, aero carbine buffer and carbine buffer spring. I don’t believe it is a gas issue. The warden adds plenty of back pressure and I have tried the gas block on several different setting.... any thoughts or recommendations? Long story short, I swapped the buffer tube out for an Armalite AR10 length tube (same as A5 length, allows the use of standard AR15 buffers), an AR15 carbine buffer, Tubb flat wire spring and KAK dual ejector BCG. Now it works. The KAK BCG solved the intermittent ejection malfunctions that it was still having with the Aero BCG. https://www.odinworks.com/Adjustable_Gas_Block_p/gb-adj.htm |
|
[#8]
|
|
[#10]
Quoted:
https://farm2.staticflickr.com/1746/42629911242_cdbffb1ed7_b.jpgUntitled by hoevito, on Flickr View Quote |
|
[#11]
|
|
[#12]
|
|
[#13]
Quoted: Perfect! Thanks for the feedback. The longer buffer system made a lot more sense to me as well. Increased dwell time/slower unlocking, plus it spreads the recoil force over a longer period making it for a smoother impulse(theoretically at least). View Quote |
|
[#14]
How are you guys liking the M5 enhanced upper/handguard combos?
IIRC, some people had issues with the handguard retention screws breaking. Is this still an issue? How are the Aero M5 handguards holding up? |
|
[#15]
Quoted:
My 3rd M5 build https://farm2.staticflickr.com/1731/41779062045_6245d505a8_b.jpgUntitled by hoevito, on Flickr https://farm2.staticflickr.com/1731/42677973041_19c0297878_b.jpgUntitled by hoevito, on Flickr View Quote |
|
[#16]
Quoted:
https://farm2.staticflickr.com/1746/42629911242_cdbffb1ed7_b.jpgUntitled by hoevito, on Flickr View Quote Both builds look really good! |
|
[#17]
Quoted: Looks great! What barrel are you using? View Quote View All Quotes View All Quotes Quoted: I am building a similar rifle to your black one, 16" barrel, 12" AP handguard. Have you weighed it? Was your intent to keep it light? BCG choice? Those .308 BCG's sure are heavy! Both builds look really good! Untitled by hoevito, on Flickr |
|
[#18]
Quoted: Thanks, used 16" Faxon big gunner I actually did yes lol. Went with the Faxon bcg, and the build came in at 8lb 1.5oz with Diamondhead sights and bcm rail panels installed. https://farm2.staticflickr.com/1754/41961195654_27d48b33ab_b.jpgUntitled by hoevito, on Flickr View Quote |
|
[#19]
Quoted: Weight is not too bad at all! You happy with the accuracy of that barrel? View Quote Far as accuracy, I have not tested it formally or even tried to shoot tight groups yet honestly. I've shot it once so far just to break it in and check function, which I tend to run around 150-200 rounds of surplus and various steel cased loads in doing so. I've only shot Malaysian surplus and assorted M80 loads so far, but it showed some pretty decent accuracy potential I'll say. Only shot at 50 yards, but this should at least show that it has some good potential with the right loads. Top left "group" I was still chasing my zero, which I still need to nail down completely. All shooting was done at 50 yards from a bench, no bipod, no bags, just the rifle resting on the mag being shot from the table lol. The bottom right "group" is a mix of M80 and Malaysian surplus mixed in together. I shot 10 round strings, and I'm pretty sure it was likely 6 rounds of m80 and 4 of Malaysian L2A2, or vice versa Untitled by hoevito, on Flickr I managed to get the second or 3rd mag on camera, shooting characteristics are quite pleasant as you can see. It's a pretty soft shooter, but the concussion kept knocking down my phone (which is what I keep looking to my right for) lol. https://youtu.be/ZGsUcKH1Tek |
|
[#21]
|
|
[#22]
@airaddict - keep us posted on your load development...I was Curtiss about that barrel? Did you weigh it?
|
|
[#23]
@Falfreak
I actually did weigh it before mounting it because i was curious myself. Its about 3lbs cuz its a socom contour and 20" long. For a $54 barrel, it shoots pretty good. |
|
[#24]
I feel bad seeing everyone else's builds here.
I was able to get a set for just over 200 shipped. So I purposely cheaped out on everything. I love the way it looks and feels. I may change the furniture though. It's only been on one range trip but it functioned great until the gas block and tube slid forward (gunsmith gave me a trick to dimple so that will be fixed). It's got a 16" med-heavy kak barrel so it's 9.5# as configured. Attached File M5 black set Kak barrel DD fixed sights A2 flash hider SAA small parts and charging handle. Brownells BCG SAA diy polished trigger A1 surplus furniture. Strike dust cover Tubbs recoil spring |
|
[#25]
Quoted:
I feel bad seeing everyone else's builds here. I was able to get a set for just over 200 shipped. So I purposely cheaped out on everything. I love the way it looks and feels. I may change the furniture though. It's only been on one range trip but it functioned great until the gas block and tube slid forward (gunsmith gave me a trick to dimple so that will be fixed). It's got a 16" med-heavy kak barrel so it's 9.5# as configured. https://www.AR15.Com/media/mediaFiles/153775/IMG_20180611_204820991-575575.JPG M5 black set Kak barrel DD fixed sights A2 flash hider SAA small parts and charging handle. Brownells BCG SAA diy polished trigger A1 surplus furniture. Strike dust cover Tubbs recoil spring View Quote Makes me think Aero is getting ready to release something new if all their first gen’s are being discounted. |
|
[#26]
Quoted: @bacon_grease ....the Aero sets have been getting cheaper and cheaper. My threaded receiver set i found for $187 at my local gunshow! Just needed an enhanced barrel nut and i was in business. Makes me think Aero is getting ready to release something new if all their first gen’s are being discounted. View Quote |
|
[#27]
Thinking about building my set into a 16” 6.5 Creedmoor from Wilson Combat with intermediate gas with SLR 7. I will be using a SDN6 on this gun.
Has anyone used the Wilson combat barrels or the M5’s? I know Wilson has a great reputation. Also thinking of going with a centurion CMR MLOK handgaurd 13”. Anyone run of of these? Also to add I’m thinking about a few different scopes. I’m torn between the Leupold VX-3i LRP, Nightforce SHV, Vortex Viper PST Gen II. |
|
[#28]
What 6.5 reloading dies did you guys go with loading for the Areo barrel ? Will normal full length dies work or do i need small base ?
I just built a 6.5 creedmoor in a bolt gun also and crap I might need two different sizing dies. |
|
[#30]
Has anyone tried a CMMG Mk3 upper on their Aero M5 lower? Curious to see how it lines up. I'd like an upper without a forward assist.
|
|
[#31]
What is the suggested barrel nut torque? I am building a16" faxton barrel upper. I know it's in here somewhere, but can't find it.
|
|
[#32]
Just ordered a Faxon 16” 6.5 Creedmoor barrel on sale for $190.
One step closer. |
|
[#33]
Aero Precision Freedom Edition receivers & receiver sets are now on sale.
https://aeroprecisionusa.com/freedom-collection.html |
|
[#34]
|
|
[#35]
anyone in need of some Aero bolt catches and extended mag releases?
|
|
[#36]
|
|
[#37]
Quoted:
Aero Precision Freedom Edition receivers & receiver sets are now on sale. https://aeroprecisionusa.com/freedom-collection.html https://aeroprecisionusa.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/a/p/apcs308067s-m5-receiver-set-special-edition-freedom-black-2.jpg View Quote |
|
[#38]
I broke a bolt catch on my 260 Rem M5 this weekend.
Although I was running suppressed, I have an SLR gas block. It lasted for ~150 rounds. Anyone know of a machined bolt catch that will fit? All I can find are cast or MIM bolt catches. |
|
[#39]
|
|
[#40]
Quoted:
I broke a bolt catch on my 260 Rem M5 this weekend. Although I was running suppressed, I have an SLR gas block. It lasted for ~150 rounds. Anyone know of a machined bolt catch that will fit? All I can find are cast or MIM bolt catches. View Quote |
|
[#41]
Quoted:
https://www.rainierarms.com/v-seven-s7-bolt-catch-308-dpms-sr-25/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
I broke a bolt catch on my 260 Rem M5 this weekend. Although I was running suppressed, I have an SLR gas block. It lasted for ~150 rounds. Anyone know of a machined bolt catch that will fit? All I can find are cast or MIM bolt catches. |
|
[#42]
13.6 SMOS GFY Handguard deal
https://www.smosarms.com/collections/deals/products/s-o-t-w-gfy-m-lok-308-rail-13-6 |
|
[#43]
Quoted:
13.6 SMOS GFY Handguard deal https://www.smosarms.com/collections/deals/products/s-o-t-w-gfy-m-lok-308-rail-13-6 View Quote |
|
[#44]
Quoted:
Quoted:
13.6 SMOS GFY Handguard deal https://www.smosarms.com/collections/deals/products/s-o-t-w-gfy-m-lok-308-rail-13-6 |
|
[#45]
Would anyone say a double ejector BCG is worth an extra $75?
I was planning on getting a Toolcraft BCG. The double ejector is $75 more for the 6.5 Creedmoor |
|
[#47]
Will a 20 round mag work off a bench with a bipod and rear bag or should I get a 10 for bench work?
Right now I only have 3 25 round mags and need something shorter for sight in. |
|
[#48]
|
|
[#49]
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.