Close Daily gun deals on rifles, handguns, shotguns, and more. Dont Miss Out

Subscribe below to get the best deals as they drop.


Hercules Level IV Ceramic Body Armor - Set of Two with FREE Plate Carrier

29% OFF
48hr Flash Sale, Get a FREE Plate carrier when you buy a set of Hercules Level IV Ceramic Body Armor Plates!

Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates

Product Overview

The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort. 


Full Edge-To-Edge Protection

Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.  


Advanced Compound Curve - True Multi-Curve Design

The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.

Product Specifications 

   Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP.
   NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards.
   Material Composition: Ceramic & UHMWPE
   Plate Size: 10”x12”
   Protection Area: 10”x12”
   Weight: 6.9 lbs
   Thickness: 1.1”
   Plate Quantity: Two (2) Plates Included
   Curve Profile: Advanced Compound Curve
   Cut: SAPI/ESAPI (Shooters Cut)
   Armor Type: Stand Alone
   Exterior: 1000D Condura® with Embroidered Logo
   Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase.
   Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.


NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.





Product Overview

The Achilles Laser Cut Plate Carrier pays homage to the legendary Greek warrior, Achilles, a great hero of the Trojan War. Lightweight, durable, and highly adaptable the Achilles carrier is designed for the modern-day multi-role warrior. Comprised of lightweight 1000 Denier laser-cut Molle and featuring comfortable padded shoulder straps and padded front and rear sections with ventilation vents, Spartan Armor Systems® has also enhanced the capability of the Achilles Laser Cut Plate Carrier by adding our top-zippered admin pouch above a convenient kangaroo pouch that comes with removable triple M4 mag pouches.  

Added Comfort And Capability


Capability and comfort keep you in the fight longer. The Achilles Laser Cut Plate Carrier will accept both 10"x12" and 11"x14" body armor. For example, to increase comfort and protection it is possible to run our Flex Fused Core IIIA soft armor behind steel core plates such as our III+ AR550 10"x12" body armor utilizing the dual-chamber system! The cummerbund accepts side plates (6”x6” or 6"x8") and is modular/removable, with the inclusion of the built-in 2-inch quick-release straps. The configuration and customization options with the Achilles Laser Cut Plate Carrier are endless.

Achilles Laser Cut Plate Carrier Specs: 


   1000 Denier Materials
   Lightweight And Duty 1000 Denier Laser Cut Molle
   Zippered Admin Pouch
   Kangaroo Pouch With Removable Triple M4 Pouches
   Padded Shoulder Pads
   Padded Front And Rear With Ventilation Vents
   Low Profile Drag Handle
   Molle Velcro Front And Rear For Identifier Patches
   2-inch Replaceable Quick-release Buckles
   Accepts 10"X12" And 11"X14" Body Armor
   6"X6" And 6"X8" Side Plates
   Fits S To XL

Product Overview

The Spartan Armor Systems® Sentinel Plate Carrier is an extremely rugged, lightweight, feature-packed plate carrier that affords users a high degree of comfort and customization. Whether you are shopping for your first plate carrier or your next plate carrier, the Sentinel carrier platform allows the operator significant freedom to build and customize to fit their needs. 

Ready For Anything

Fitting 38” to 48” chest sizes, the Sentinel Plate Carrier is fabricated from 1000 denier fabric and fits 10"x12" shooters cut plates. Featuring anti-slip shoulder padding with velcro, side release buckles, and a highly breathable padded mesh throughout the interior for comfort the Sentinel Plate Carrier affords all-day comfort and wearability. The removable cummerbund features removable side plate pockets for both 6"x6" and 6"x8" plate armor inserts for added protection. The Spartan Armor Systems Sentinel Plate Carrier has been one of our most popular carriers with thousands having been sold to Law Enforcement Officers and Civilians alike.
Spartan Armor Systems® Sentinel Plate Carrier Specs:

   Adjustable from 38" To 48" Chest Size
   Durable Emergency Drag Handle
   Anti-slip Shoulder Padding With Velcro
   Side Release Buckles On The Internal Waist Strap
   Padded Mesh Separators For The Interior Of The Carrier For Breathability
   Fits 10" X 12" Shooters Cut Plates
   Removable Cummerbund With Side Plate Pockets For 6" X 6" And 6" X 8" Side Plate Armor
   Velcro In Front Of The Carrier Is 8” X 4” With A Velcro Loop On Each Side
   Velcro On The Back Of The Carrier Measures 9” X 3”
   Stronger Carrier Material That Can Withstand Extensive Wear And Tear Over A Long Period Of Time
   1000 Denier
   Bottom Loading
   Weighs Approximately 2lbs. 9oz.

NOTE: This plate carrier CAN accept 6"x8" side plates. There is a flap of Velcro inside each side plate pocket that must be flipped vertically to allow for 6"x8" side plates.
  • Posted By DaSpartan
  • Posted 12/6/2022 3:27:00 PM EST
  • Brand
  • Category Armor