User Panel
Originally Posted By ken_mays:
Maybe Beretta learned from the ACR debacle. I remember some of the rampant panty-pissing going on around here because the ACR barrel was "only" nitrided, not chrome-plated. View Quote IIRC, Bushmaster would only say the barrels had a proprietary coating at first. If BM had handled the ACR launch better I don't think people would have had a problem with a nitride coated barrel. |
|
NRA Life Member
|
Originally Posted By Master_Blaster:
Given the avg. cost of modern, new-prod long guns, $1500 isn't exactly expensive. In fact, its (suggested retail) price point is lower than just about anything else in its class. View Quote You're right, it's been a while since I have looked at the MSRP of either the ACR or the SCAR. The ARX-100 even at $1950.00 is a steal of a deal. |
|
|
Anyone have any updates? They have posted pics of finished production guns in the Maryland factory... have any shipped?
|
|
|
Originally Posted By Conqueror:
Anyone have any updates? They have posted pics of finished production guns in the Maryland factory... have any shipped? View Quote Apparently (ie. supposedly), it's now shipping. They'll also eventually have "Gallatin, TN" stamped on the receiver, because it looks like Beretta USA is relocating. O'Malley & the MD-majority get their karma. |
|
|
I hope it is closer to $1500.........
Originally Posted By 556Cliff:
You're right, it's been a while since I have looked at the MSRP of either the ACR or the SCAR. The ARX-100 even at $1950.00 is a steal of a deal. View Quote View All Quotes View All Quotes Originally Posted By 556Cliff:
Originally Posted By Master_Blaster:
Given the avg. cost of modern, new-prod long guns, $1500 isn't exactly expensive. In fact, its (suggested retail) price point is lower than just about anything else in its class. You're right, it's been a while since I have looked at the MSRP of either the ACR or the SCAR. The ARX-100 even at $1950.00 is a steal of a deal. |
|
Sancho Panza..........stuck in reverse gear since 2007
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction" |
My LGS told me that most of the wholesalers have them listed in their catalogs but don't have any to ship to retailers yet.
|
|
FreeBear: I've been saying it for years: The Gene Pool needs more chlorine. A hellava lot more.
|
NRA show tomorrow.
I hope someone asks why they went from nitride to chrome for the barrels and if we will see the A3 large vent handguards incorporated into the ARX-100? I would also like to know if the adjustable gas block has a suppressor setting? |
|
|
Originally Posted By 556Cliff:
NRA show tomorrow. I hope someone asks why they went from nitride to chrome for the barrels and if we will see the A3 large vent handguards incorporated into the ARX-100? I would also like to know if the adjustable gas block has a suppressor setting? View Quote View All Quotes View All Quotes Originally Posted By 556Cliff:
NRA show tomorrow. I hope someone asks why they went from nitride to chrome for the barrels and if we will see the A3 large vent handguards incorporated into the ARX-100? I would also like to know if the adjustable gas block has a suppressor setting? p.19 rehash: Originally Posted By Master_Blaster:
Originally Posted By 556Cliff:
In this YouTube video link you can see that the aluminum barrel shroud and the adjustable gas block come from the ARX-160A3. Food for thought at 5:18 - "Eventually, all of the A3 features will be incorporated into the US marketed ARX-100 variant." So, the updates are supposed to be coming, but it would be nice to verify & find out if there's a firm timeline established for integrating them. I also seem to recall Lynn stating in a vid that the lower setting would work with a can. |
|
|
Originally Posted By cyclone:
I hope it is closer to $1500......... View Quote View All Quotes View All Quotes I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. Originally Posted By Bullet_:
HEADS UP!!! Hinterlands Outfitters ( a discount internets gun store, similar to Bud's, but in Texas ) has their ARX street price up! They want: $1,565.24 If that price stays, Beretta is going to crush the competition. http://www.hinterlandoutfitters.com/beretta-model-arx100-rifle-jxr11600-remington-tele-rail-p-46171.html |
|
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Originally Posted By Bullet_:
I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. View Quote View All Quotes View All Quotes Originally Posted By Bullet_:
Originally Posted By cyclone:
I hope it is closer to $1500......... I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. Originally Posted By Bullet_:
HEADS UP!!! Hinterlands Outfitters ( a discount internets gun store, similar to Bud's, but in Texas ) has their ARX street price up! They want: $1,565.24 If that price stays, Beretta is going to crush the competition. http://www.hinterlandoutfitters.com/beretta-model-arx100-rifle-jxr11600-remington-tele-rail-p-46171.html Ya they will. I learned from the Tavor though. Wait a year or more before buying. I had a Tavor pre ordered before they were shipping. Paid $1999.99. Now we can get them for 16-1700 range... If you shop smart. I'm gonna wait it out and hope it drops to 12-1300 price tag range. I'm just glad another unique weapon is hitting the market. There's no point nowadays to go to a gun shop or show to look at rifles(slight exaggeration). AR's are everywhere! I know this is Arfcom and lots of die hard Ar15 fans. Once you've seen an AR you have just about seen them all, lol. Anyone else getting bored with the platform? Of course I used an m16 and m4 in the military, so that is another reason I'm bored with it. I like to play with bullpups now |
|
|
Originally Posted By 556Cliff:
NRA show tomorrow. I hope someone asks why they went from nitride to chrome for the barrels and if we will see the A3 large vent handguards incorporated into the ARX-100? View Quote I'm curious as well. I suspect Beretta went chrome for cost and accuracy reasons. |
|
|
That is a good price..........I was trying to decide between this and a SIG 556Xi, and waiting for the ARX to be released is hard.
Originally Posted By Bullet_:
I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. View Quote View All Quotes View All Quotes Originally Posted By Bullet_:
Originally Posted By cyclone:
I hope it is closer to $1500......... I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. Originally Posted By Bullet_:
HEADS UP!!! Hinterlands Outfitters ( a discount internets gun store, similar to Bud's, but in Texas ) has their ARX street price up! They want: $1,565.24 If that price stays, Beretta is going to crush the competition. http://www.hinterlandoutfitters.com/beretta-model-arx100-rifle-jxr11600-remington-tele-rail-p-46171.html |
|
Sancho Panza..........stuck in reverse gear since 2007
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction" |
Originally Posted By cyclone:
That is a good price..........I was trying to decide between this and a SIG 556Xi, and waiting for the ARX to be released is hard. View Quote View All Quotes View All Quotes Originally Posted By cyclone:
That is a good price..........I was trying to decide between this and a SIG 556Xi, and waiting for the ARX to be released is hard. Originally Posted By Bullet_:
Originally Posted By cyclone:
I hope it is closer to $1500......... I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. Originally Posted By Bullet_:
HEADS UP!!! Hinterlands Outfitters ( a discount internets gun store, similar to Bud's, but in Texas ) has their ARX street price up! They want: $1,565.24 If that price stays, Beretta is going to crush the competition. http://www.hinterlandoutfitters.com/beretta-model-arx100-rifle-jxr11600-remington-tele-rail-p-46171.html I hope that is the same price point all retailers will hit |
|
FreeBear: I've been saying it for years: The Gene Pool needs more chlorine. A hellava lot more.
|
As do I
Originally Posted By poorman:
I hope that is the same price point all retailers will hit View Quote View All Quotes View All Quotes Originally Posted By poorman:
Originally Posted By cyclone:
That is a good price..........I was trying to decide between this and a SIG 556Xi, and waiting for the ARX to be released is hard. Originally Posted By Bullet_:
Originally Posted By cyclone:
I hope it is closer to $1500......... I shall quote myself from earlier in the thread since the Hinterlands link is still GTG. Originally Posted By Bullet_:
HEADS UP!!! Hinterlands Outfitters ( a discount internets gun store, similar to Bud's, but in Texas ) has their ARX street price up! They want: $1,565.24 If that price stays, Beretta is going to crush the competition. http://www.hinterlandoutfitters.com/beretta-model-arx100-rifle-jxr11600-remington-tele-rail-p-46171.html I hope that is the same price point all retailers will hit |
|
Sancho Panza..........stuck in reverse gear since 2007
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction" |
Originally Posted By cyclone:
As do I Originally Posted By poorman:
I hope that is the same price point all retailers will hit Odds are, that'll be the price point of the big discount movers like J&G, Buds, ...etc once the Call of Duty idiots are done buying them for 3X retail on Gunbroker. ETA: word on the Beretta Forum is that the $1565 is just above the Dealer Wholesale price that Beretta put out, so unless the dealers in the know on BF were lying, it looks to be GTG. |
|
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
I suspect they changed to chrome for the same reason they changed the safety, and changed to an A2 style pistol grip, and shortened the handguard length, and other features - so they could be just like an AR15/M4.
|
|
This is...a clue - Pat_Rogers
I'm not adequately aluminumized for this thread. - gonzo_beyondo CO, FL, MI, SC, NH - Please lobby your legislators to end discrimination against non-resident CCW permit holders |
Apparently Beretta brought crickets to the NRA show...
That's all I'm hearing anyway... |
|
|
Originally Posted By 556Cliff:
Apparently Beretta brought crickets to the NRA show... That's all I'm hearing anyway... View Quote There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. |
|
This is...a clue - Pat_Rogers
I'm not adequately aluminumized for this thread. - gonzo_beyondo CO, FL, MI, SC, NH - Please lobby your legislators to end discrimination against non-resident CCW permit holders |
Originally Posted By Gamma762:
There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. View Quote View All Quotes View All Quotes Originally Posted By Gamma762:
Originally Posted By 556Cliff:
Apparently Beretta brought crickets to the NRA show... That's all I'm hearing anyway... There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. Well that sucks. It seems to loose something every time it makes an appearance. Did you get to ask any questions? |
|
|
Originally Posted By Gamma762:
There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. View Quote View All Quotes View All Quotes Originally Posted By Gamma762:
Originally Posted By 556Cliff:
Apparently Beretta brought crickets to the NRA show... That's all I'm hearing anyway... There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. Downright stupid if that was a production unit. |
|
|
Originally Posted By Gamma762:
There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. View Quote View All Quotes View All Quotes Originally Posted By Gamma762:
Originally Posted By 556Cliff:
Apparently Beretta brought crickets to the NRA show... That's all I'm hearing anyway... There were several examples there, you could even pose with one for a photo and they'd superimpose you into a magazine cover shot. The ones I looked at, the actuation force on the safety was even higher than on previous examples, essentially to the point of being unusable. The bottom mounted mag release no longer appears to function either. The bottom mag release worked fine when I tried the ones they had at the Harrisburg show. |
|
|
I have seen two YouTube videos from the NRA show and the mag release under the trigger guard was not mentioned in either of them.
|
|
|
|
Originally Posted By Master_Blaster:
2 videos? I've found 1 video & ZERO updates/news articles - ??? Yeah. View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Originally Posted By 556Cliff:
I have seen two YouTube videos from the NRA show and the mag release under the trigger guard was not mentioned in either of them. 2 videos? I've found 1 video & ZERO updates/news articles - ??? Yeah. I have not seen any articles either. https://www.youtube.com/watch?v=Qbl8S3Yn52g https://www.youtube.com/watch?v=VE-GuxIrCSA |
|
|
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
Originally Posted By eodcolret:
Rep said they should be shipping/ship this week. Will believe it when I see them in the store/on GB. View Quote At least it's no longer " soon" . ETA: The large cooling holes are missing from that display gun. One new change I see is that the front sling swivel base has been reinforced with a thick swivel. The original was just a piece of bent wire, like an AR15's. |
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Originally Posted By eodcolret:
http://i1097.photobucket.com/albums/g360/EODCOLRET/9917dab44d396c482b1fdfc413df7c25.jpg Picture of the ARX-100 in the "semi" wild. I took the picture inside the Beretta Show Trailer that was parked at the Gander Mountain grand opening in McDonough, GA. It felt real goo and the bottom mag release along with the side mounted magazine releases all worked. Rep said they should be shipping/ship this week. Will believe it when I see them in the store/on GB. View Quote Uh, I thought it had heat shielding to prevent melting. Seriously though, good job. This is probably the only pic outside of the "media" that I've seen. Now I just need to find out if/when the A3 upgrades will come online. |
|
|
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue.
Not that we'd do FA type heat, but plastic is still plastic. |
|
|
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. View Quote The ceramic & Al shielding is there to counteract heat pooling. The -160 has a fun switch & no reports/rumors of problems thus far. In fact, the A3 variant has a infantry automatic version. I've never been able to verify the melting trunion rumor about the G36. So IMO, it's internet rumor until I see some definitive proof - or at least get it from a credible source. |
|
|
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. View Quote The ARX supposedly has a ceramic insert around the chamber to keep the Salvador Dali effect at bay. I say supposedly because no one has confirmed anything the civilian version is being made with compared to the full zoot Mil version. |
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
Originally Posted By Master_Blaster:
I've never been able to verify the melting trunion rumor about the G36. So IMO, it's internet rumor until I see some definitive proof - or at least get it from a credible source. View Quote Not melting, but POI wander due to heating/cooling among other things. Spain, UK, US SOCOM, Croatia, Turkey and US LE have all had troubles with the G36. All those like new G36K parts kits that poped up a few years ago were from the US LE ditching it. ETA: the XM-8 plastic melted when it came into contact with Deet bug repellent. How the fuck those pimple assed, seat shining Pentagon jokers went +15 years of testing and R&D without discovering that problem is beyond me. |
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Originally Posted By Bullet_:
Not melting, but POI wander due to heating/cooling among other things. Spain, UK, US SOCOM, Croatia, Turkey and US LE have all had troubles with the G36. All those like new G36K parts kits that poped up a few years ago were from the US LE ditching it. ETA: the XM-8 plastic melted when it came into contact with Deet bug repellent. How the fuck those pimple assed, seat shining Pentagon jokers went +15 years of testing and R&D without discovering that problem is beyond me. View Quote View All Quotes View All Quotes Originally Posted By Bullet_:
Originally Posted By Master_Blaster:
I've never been able to verify the melting trunion rumor about the G36. So IMO, it's internet rumor until I see some definitive proof - or at least get it from a credible source. Not melting, but POI wander due to heating/cooling among other things. Spain, UK, US SOCOM, Croatia, Turkey and US LE have all had troubles with the G36. All those like new G36K parts kits that poped up a few years ago were from the US LE ditching it. ETA: the XM-8 plastic melted when it came into contact with Deet bug repellent. How the fuck those pimple assed, seat shining Pentagon jokers went +15 years of testing and R&D without discovering that problem is beyond me. Deet bug repellant? Is that the new-&-improved agent orange or something? |
|
|
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
Originally Posted By Master_Blaster:
Deet bug repellant? Is that the new-&-improved agent orange or something? View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Originally Posted By Bullet_:
ETA: the XM-8 plastic melted when it came into contact with Deet bug repellent. How the fuck those pimple assed, seat shining Pentagon jokers went +15 years of testing and R&D without discovering that problem is beyond me. Deet bug repellant? Is that the new-&-improved agent orange or something? No, but close. Shit dates to at least the 80's ( I was issued it then ) It was powerful enough to turn my casio watch into taffy on a two week field problem. |
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. View Quote I figure they would have probably have tested for that... especially since it's seen combat and is in widespread issue, unlike the XM8. |
|
|
Originally Posted By vellnueve:
I figure they would have probably have tested for that... especially since it's seen combat and is in widespread issue, unlike the XM8. View Quote View All Quotes View All Quotes Originally Posted By vellnueve:
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. I figure they would have probably have tested for that... especially since it's seen combat and is in widespread issue, unlike the XM8. Wide spread use with whome, aside from the Italians? Also you have figured the G36 would have been tested for that too... |
|
|
Originally Posted By Bullet_:
The ARX supposedly has a ceramic insert around the chamber to keep the Salvador Dali effect at bay. I say supposedly because no one has confirmed anything the civilian version is being made with compared to the full zoot Mil version. View Quote View All Quotes View All Quotes Originally Posted By Bullet_:
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. The ARX supposedly has a ceramic insert around the chamber to keep the Salvador Dali effect at bay. I say supposedly because no one has confirmed anything the civilian version is being made with compared to the full zoot Mil version. Can't imagine they wouldn't include the ceramic heat shields on the civilian version. If the gun melted with a couple mag dumps they would have hordes of angry customers demanding their money back. To Beyond_Visual_Range: they claim that the barrel will melt before the plastic due to the ceramic resistor. |
|
|
Originally Posted By Bullet_:
Tne new change I see is that the front sling swivel base has been reinforced with a thick swivel. The original was just a piece of bent wire, like an AR15's. View Quote I think that is due to the gas block redesign, since it now has an adjustable gas system. |
|
|
Originally Posted By AEROMechanic:
Wide spread use with whome, aside from the Italians? Also you have figured the G36 would have been tested for that too... View Quote View All Quotes View All Quotes Originally Posted By AEROMechanic:
Originally Posted By vellnueve:
Originally Posted By Beyond_Visual_Range:
That thing has an awful lot of plastic. Even more so than HK G36. Would it melt under heavy fire? I remember XM8 had that issue. Not that we'd do FA type heat, but plastic is still plastic. I figure they would have probably have tested for that... especially since it's seen combat and is in widespread issue, unlike the XM8. Wide spread use with whome, aside from the Italians? Also you have figured the G36 would have been tested for that too... They're being used by elements of a few other nations as well. As opposed to the XM8 which never made it out into the wild. |
|
|
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
Originally Posted By Conqueror:
Can't imagine they wouldn't include the ceramic heat shields on the civilian version. If the gun melted with a couple mag dumps they would have hordes of angry customers demanding their money back. View Quote View All Quotes View All Quotes Originally Posted By Conqueror:
Can't imagine they wouldn't include the ceramic heat shields on the civilian version. If the gun melted with a couple mag dumps they would have hordes of angry customers demanding their money back. Normally I would agree. But Beretta reps have been all over the map saying one thing and when we see something different, they say " oh yeah, uh,... that changed " . Right now, I'll wait until the ARX gets shipped to see what it will be. Originally Posted By Conqueror:
Originally Posted By Bullet_:
Tne new change I see is that the front sling swivel base has been reinforced with a thick swivel. The original was just a piece of bent wire, like an AR15's. I think that is due to the gas block redesign, since it now has an adjustable gas system. Agreed, There is going to a lot more heat in the new adjustable GB. Making a thick aluminum swivel instead of steel will help keep the sling from melting. |
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Still waiting...
|
|
|
One is up on GA. $1999. Not my listing, just the first one I've seen. gunsamerica
|
|
"Their clueless, the only ones paying attention on the streets are the cops and the criminals. Everyone is else is just going somewhere, or shopping."
|
|
|
What are they going for?
|
|
|
I paid the Beretta MSRP of $1950. Some people are betting they will come down after time. Could be but I am happy with my deal.
|
|
|
eodcolret, How does the selector lever feel? Does the third mag release under the trigger guard work? Does the barrel return to zero after being removed and re-installed? |
|
|
Selling Ron Cohen grade MIM parts to suckers
AZ, USA
|
|
Kakistocracy - n., pl., -cies.
Government by the least qualified or most unprincipled citizens. |
Originally Posted By eodcolret:
Yes the ARX-100 has been released and is in the wild. Here is the one I picked up today from my dealer. I ordered it last year and it finally came in. He had received two (one of which was mine). http://i1097.photobucket.com/albums/g360/EODCOLRET/358fac2a94f8ffb43c1b024781f2fac6.jpg http://i1097.photobucket.com/albums/g360/EODCOLRET/e18615f746377f16f85c995df97385a1.jpg View Quote That's awesome. Congratulations on new rifle. Good to know it's out in the wild. |
|
|
Originally Posted By Bullet_:
Yes1 Need a range report! and a title change 556Cliff. View Quote View All Quotes View All Quotes Originally Posted By Bullet_:
Originally Posted By 556Cliff:
eodcolret, How does the selector lever feel? Does the third mag release under the trigger guard work? Yes1 Need a range report! and a title change 556Cliff. What should I change it to? |
|
|
Originally Posted By JRCmx:
http://3.bp.blogspot.com/_TbkIC-eqFNM/SqqTV_d77cI/AAAAAAAAD4M/CxQkciIYbM4/s320/fred_sanford.jpg View Quote LOL |
|
http://www.guntechtips.com
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.