Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Page AK-47 » Magazines
AK Sponsor: palmetto
Site Notices
Posted: 7/2/2015 7:16:29 PM EDT
Requiem arms has Polish 30's listed as good-to-excellent for a 3-pack for $17.76, with shipping to my door the batch I bought (4 of the 3-packs) still came out to less than 8 bucks a mag delivered. First time ordering from them but all reports say they are GTG.

http://www.requiemarms.com/july-4th-sale/three-pack-polish-ak-47-magazines
Link Posted: 7/2/2015 8:13:20 PM EDT
[#1]
Thanks, I just ordered some.
Link Posted: 7/2/2015 8:46:15 PM EDT
[#2]
OOS

Thanks for the heads up.
Link Posted: 7/2/2015 8:47:55 PM EDT
[#3]
Gee, out of stock already.  I ordered six and nada.  Oh well.
Link Posted: 7/2/2015 8:57:16 PM EDT
[#4]
According to the pictures from the link provided, these do not appear to be Polish.
Link Posted: 7/3/2015 1:29:13 PM EDT
[#5]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
According to the pictures from the link provided, these do not appear to be Polish.
View Quote


Can you cite specifics that lead you to believe that? The pictures are fairly fuzzy and low-res and though I myself do collect mags and own some Polish mags in fact, to me it seems impossible to tell from that pic, the only real discernible detail is that the mags in the pic are first-gen euro.
Link Posted: 7/3/2015 4:52:38 PM EDT
[#6]
  Can you cite specifics that lead you to believe that? The pictures are fairly fuzzy and low-res and though I myself do collect mags and own some Polish mags in fact, to me it seems impossible to tell from that pic, the only real discernible detail is that the mags in the pic are first-gen euro.  
View Quote





On the Romanian and Polish AK mags, the rear rib that runs parallel with the spine stops short of the feed lip plate. In the linked pic, the rear rib touches the feed lip plate.
Link Posted: 7/5/2015 6:21:44 PM EDT
[#7]
Discussion ForumsJump to Quoted PostQuote History
Quoted:





On the Romanian and Polish AK mags, the rear rib that runs parallel with the spine stops short of the feed lip plate. In the linked pic, the rear rib touches the feed lip plate.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Quoted:
  Can you cite specifics that lead you to believe that? The pictures are fairly fuzzy and low-res and though I myself do collect mags and own some Polish mags in fact, to me it seems impossible to tell from that pic, the only real discernible detail is that the mags in the pic are first-gen euro.  





On the Romanian and Polish AK mags, the rear rib that runs parallel with the spine stops short of the feed lip plate. In the linked pic, the rear rib touches the feed lip plate.


That is incorrect.

The rear rib on all first gen euro mags goes straight up into the plate, and all second gen mags have the "hockey-stick" turn before the plate. It simply denotes different generations of mags. I have romanian, russian, hungarian, and polish mags in both first and second gen config.
Link Posted: 7/5/2015 9:50:29 PM EDT
[#8]
I was unaware there was a 1st & 2nd generation AK mag, all the pictures I have seen of Polish and Romanian AK mags, I noticed the rear rib stops short of the feed lip plate. But after reading your post about 1st and 2nd gen mags, I searched the internet and found a few pics of Russian mags at the Glock Talk AK mag section where the rear rib stops short of the plate. I was wrong on the information I posted, thanks for the education Dragynn.
Link Posted: 7/9/2015 11:20:01 AM EDT
[#9]
There must have been a glitch in their ordering system as my order did go through for 6.  Yay!!!  All were in pretty good used shape but some had light rust.  I took them all apart and gave them a proper oiling.  All in all a very good deal for some cheap mags.  Reminds me of way back when when mags and ammo was cheap and plentiful and Obama was nothing but a nobody.    Only markings on them were on a couple which had an S or a 2 or a 4 but some did have numbers etched on them not stamped though.  



Link Posted: 7/9/2015 11:31:09 AM EDT
[#10]
Got mine. A couple are pretty rough with floor plates that look like they were used for a hammer. Mine have stamped numbers. Either way, worth the price of admission. Thanks for the heads up Dragynn.

These have the Romy spot welds .... They all look the same to me tho
Link Posted: 7/14/2015 1:52:12 PM EDT
[#11]
Got mine and they look pretty good, real good for the price, all appear to be Polish with a mix of first and second gen, all in all a good deal on solid mags, this was my first order with Requiem Arms and they seem like a solid vendor so far!
Page AK-47 » Magazines
AK Sponsor: palmetto
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top