I have never built an upper. This will be my first. I picked a 16 inch Stealth. So I am looking for any advise on how to get the most out of this barrel on a budget(divorce lawyer taking my money). I think I will do a tower front site and midlength handgaurds. Any advise you can give would be appreciated.

take an existing rifle and  swap in that barrel.

Those barrels are garbage.. Send it to me and I'll take care of it for you.

Build another upper around this barrel with inexpensive parts instead of taking another rifle apart. Buy a blemished upper receiver or a used one in the EE (with or without M4 feed ramps depending on the barrel extension you selected), order a gas block/gas tube/A2 flash hider/crush washer/A2 flash hider from LaRue, find a used or inexpensive 12-15" free-float rail such as a UTG Pro/Troy/ALG. Assemble with some Aeroshell grease and use the BCG and CH from another rifle until you can buy one for this upper. Congrats on winning a barrel! Do what you want, but this is what I am doing with the PredaTar barrel that I won last week.

A good not cheap but not expensive option would be to get a Aero M4E1 upper and 15in handguard combo from Schuyler for $200, a cheap mil spec or BCM mod 4 CH for $12 or $40 and a VG6 muzzle device for $55 all from Schuyler.  If you don't want to opt for the fancy muzzle device, pick up a cheap one from somewhere else.  Buy a Toolcraft BCG for $92 from WC Armory.  Get a SLR Gas block with .450 spacing from SLR for $35 and one of his gas tubes for $15 unless you opted for the expensive Larue gas block.

You could always sell the barrel to me instead.  I would gladly trade you a new 16in BA barrel and upper for your barrel!

Send me a 300 blk barrel ill swap it out on an existing rifle