User Panel
User Panel
User Panel
NM, USA
|
Posted: 7/13/2012 1:34:23 PM EDT
[#1]
Sweet
|
|
|
NM, USA
|
Posted: 7/13/2012 1:36:39 PM EDT
[#2]
Badass
|
|
|
MN, USA
|
Posted: 7/13/2012 11:18:45 PM EDT
[Last Edit: superphreak4]
[#3]
Here's my first AR and my first Build
Lower Spikes Punisher PSA MOE lower build kit Upper Spikes upper assembly Troy 11" VTAC Alpha Daniel Defense 16" 1:7 Midlength Daniel Defense BCG PSA Tactical latch CH A2 Flash Hider YHM low profile gas block Sights Troy BUIS - HK style front http://home.comcast.net/~superphreak4/AR15-Full.jpg http://home.comcast.net/~superphreak4/AR15-Close-up.jpg http://home.comcast.net/~superphreak4/AR15-Sights.jpg 35 rounds American Eagle .223 55gr @ 50 yards benchrest http://home.comcast.net/~superphreak4/AR15-35rnds-AE55gr-50yds.jpg |
|
|
|
Posted: 7/14/2012 10:53:43 AM EDT
[#4]
my two rifles back from cerakoting and almost complete
still need some more black accessories. burnt bronze 16" palmetto state mid-length with 13" troy alpha rail stainless spikes GMP dissipator upper both on bargain bin spikes tactical lowers 
|
|
|
|
GA, USA
|
Posted: 7/14/2012 9:08:40 PM EDT
[Last Edit: jgalvar]
[#5]
I like to refer to this as my coyote special..
BGM Mod4 Charging Handle PSA Lower Receiver PSA LPK Geissele SSA Trigger Daniel Defense Upper w/ 16" lightweight barrel Daniel Defense Omega X 12" rail BCM Gunfighter Grip Magpul CTR stock w/ enhanced buttpad Magpul custom stippled pmag 30rd Magpul MBUS sights Primary Arms Microdot w/ AD High riser mount Primary Arms 3x long eye relief magnifier w/ AD swing away mount Primary Arms ultimate weapon light Tango Down 6" panels Homebrew Sling 
By jgalvar at 2012-07-14 
By jgalvar at 2012-07-14 
By jgalvar at 2012-07-14 
By jgalvar at 2012-07-14 |
|
|
|
Posted: 7/14/2012 9:20:14 PM EDT
[#6]
|
|
|
|
|
Posted: 7/14/2012 10:17:31 PM EDT
[#7]
Originally Posted By jgalvar: I like that setup I like to refer to this as my coyote special.. BGM Mod4 Charging Handle PSA Lower Receiver PSA LPK Geissele SSA Trigger Daniel Defense Upper w/ 16" lightweight barrel Daniel Defense Omega X 12" rail BCM Gunfighter Grip Magpul CTR stock w/ enhanced buttpad Magpul custom stippled pmag 30rd Magpul MBUS sights Primary Arms Microdot w/ AD High riser mount Primary Arms 3x long eye relief magnifier w/ AD swing away mount Primary Arms ultimate weapon light Tango Down 6" panels Homebrew Sling http://img689.imageshack.us/img689/715/imag0371u.jpg By jgalvar at 2012-07-14 http://img688.imageshack.us/img688/1879/imag0370w.jpg By jgalvar at 2012-07-14 http://img338.imageshack.us/img338/9090/imag0373g.jpg By jgalvar at 2012-07-14 http://img27.imageshack.us/img27/1867/imag0372fm.jpg By jgalvar at 2012-07-14 |
|
|
|
CA, USA
|
Posted: 7/15/2012 5:27:23 PM EDT
[#8]
My humble gift to my son, Dylan. Born on July 1 ,2012
http://www.autoacforum.com/forumimages/DSC_1971.JPG Double Star Lower $89.99 PSA MOE LPK $129.99 CA Bullet Button $12.95 Complete Upper $280.00 Total cost $512.93 Could have been $40 less if I went with the regular LPK but could resist PSA's deal on the MOE kit plus free shipping. Eotech belongs to my 10yr old which he uses on his airsoft...will be replaced by a real sight soon. |
|
|
TX, USA
|
Posted: 7/15/2012 9:23:05 PM EDT
[#9]
Originally Posted By tomibriggs:
My humble gift to my son, Dylan. Born on July 1 ,2012 http://www.autoacforum.com/forumimages/DSC_1971.JPG Double Star Lower $89.99 PSA MOE LPK $129.99 CA Bullet Button $12.95 Complete Upper $280.00 Total cost $512.93 Could have been $40 less if I went with the regular LPK but could resist PSA's deal on the MOE kit plus free shipping. Eotech belongs to my 10yr old which he uses on his airsoft...will be replaced by a real sight soon. Congratulations, and  welcome to the site
|
|
|
AZ, USA
|
Posted: 7/16/2012 12:45:34 AM EDT
[Last Edit: Atticaz]
[#10]
Originally Posted By CavBoy1:
http://i158.photobucket.com/albums/t85/Cavboy1/UpdatedM4019.jpg Jealous??  http://i158.photobucket.com/albums/t85/Cavboy1/UpdatedM4019.jpg What case is this!!? I NEED IT!!! :) |
|
|
ME, USA
|
Posted: 7/17/2012 11:42:17 AM EDT
[#11]
mini 14? what scope is that?
|
|
|
MI, USA
|
Posted: 7/17/2012 10:41:23 PM EDT
[#12]
Hi Everyone! I'm a new member to the forum, thought I'd stop by and show my build:
http://img.photobucket.com/albums/v702/crzyj8700/Untitled-3-1.jpg PSA 16" MP Upper Magpul MOE Handguard, AFG, Rear MBUS PSA MOE Lower Magpul Trigger Guard, MOE Stock, PMAG SA XDM9mm Compact Truglo TFO Sights |
|
|
MI, USA
|
Posted: 7/18/2012 4:18:11 PM EDT
[Last Edit: cmeloyjr]
[#13]
newbie here and my first build
haters gonna hate my choice of gear UTG 4 postion buttstock $30 UTG front sight $30 UTG rear sight $30 UTG rifle length free float quad rail $90 midwest industries low profile gas block .750 $40 surplus arms/ammo stripped lower $60 DPMS lower parts kit $60 Rguns 16 inch gov profile (mid length gas system) complete upper $460 scope riser is some el-cheapo chinese mount i found at gun show for $25 the scope is a BSA 55mm 3x9 power i got for free on a gun trade all in all, i "broke" the gun in with no lube for 300 rounds, not a single damn failure, very reliable, round count is just shy of 1000 now, not a single failure at all, all the parts are lightly lubed now of course, i love this rifle alot, very accurate, longest local range is 200 yards and they got a 1 foot wide 3 foot tall steel plate at 200 yard mark, i can hit that standing, very happy with this rifle and how it turned out even useing cheap gear, no other future plans with this one, just gonna get rid of those ugly oversized "thumb nuts" that hold the irons on and replace with with something smaller and stronger, but i do plan on building more 
gun weighs in just shy of 8 pounds with a fully loaded mag in it, (with irons not the scope) i applied high pigment white and red to my lower and painted in the bullet symbols, i think it looks great http://i49.tinypic.com/2m35yep.jpg http://i48.tinypic.com/14cso4k.jpg http://i48.tinypic.com/2digh1g.jpg http://i50.tinypic.com/x6inbs.jpg |
|
|
FL, USA
|
Posted: 7/18/2012 11:15:21 PM EDT
[Last Edit: sfljohn]
[#14]
first post, first build, kind of a budget build...
for the moment, its just a range toy and "home defense" http://i80.photobucket.com/albums/j196/sprayed150/DSC_0039.jpg http://i80.photobucket.com/albums/j196/sprayed150/DSC_0041.jpg http://i80.photobucket.com/albums/j196/sprayed150/DSC_0033.jpg dpms flat top upper/slickside stripped dpms lower MAID grip/guard CTR stock wilson 2 stage trigger unit BUIS sights(temporary) generic 4 rail AFG Surefire light dpms brake |
|
|
USA
|
Posted: 7/19/2012 11:07:49 AM EDT
[#15]
Wrapped up an m4gery build I've been working on the last few months. First time assembling the stripped upper with a barrel assembly. Definitely a Franken-build.
Parts list: PSA stripped lower receiver w/ PSA MOE LPK Vltor IMOD stock BCM "blem" upper receiver DS Arms 14.5" barrel (5.56 w/ 1/7 twist, and chrome lined) w/ FSB Rainier Arms XTC compensator and Raptor ambi charging handle LMT BCG Knight's Armament RAS w/ panels and vfg Streamlight Polytac light in a VLTOR offset mount Matech BUIS Primary Arms 30mm red dot in an Aimpoint QRP2 mount |
|
|
|
Posted: 7/20/2012 1:43:41 AM EDT
[Last Edit: LMTRocks]
[#16]
Click for fullsize photo
LMT Form 1 SBR 8" Noveske 300BLK barrel YHM 762 Titanium and Brake Noveske QD endplate Ergo RVG Troy 7.2 Vtac |
|
|
|
MO, USA
|
Posted: 7/20/2012 2:41:55 PM EDT
[#17]
My first "build". About 6 months old now with a 1000ish rounds through it. Not really considered a build since I had it ready to fire by purchasing a complete upper and lower.lol. Probably get some hate on the parts, but the price was def right. Working on a second gun now. Lower is ready to go just torn on upper/barrel options. Anyways, here are some pics/specs......
All prices are total. No shipping or transfer for me since Midway is 5 miles away, and lower was a local group buy with a licensed buddy. New Frontier LW15. Complete assembled with collapsible stock - $90 new I know the polymer is kinda frowned upon, but I've been very pleased with it. I did make a couple changes... Basic CMMG fire control group (didn't like the polymer here) - $20 new installed (cmmg factory is actually within 30 miles and they have a retail/outlet store in town) Yahkee Hill takedown pins - $15 new DPMS Oracle Complete upper. 5.56 with BCG - $375 new So gun was pretty much done at $465. Then to keep with the cheap theme..... Walther P55 optic. Really wanted an AAA powered one. - $80 new Two Grip Pods + metal A2 sights + charging handle with larger latch - $100 for all used Osprey Drop In quad rail w/ rail covers - $50 new Hogue Grip - $16 new All in all, extremely happy with it. It was a great gun to get my feet wet with. http://i48.tinypic.com/2h6y454.jpg http://i48.tinypic.com/24415z8.jpg http://i45.tinypic.com/671frm.jpg http://i49.tinypic.com/rlb587.jpg http://i48.tinypic.com/34rewly.jpg |
|
|
|
Posted: 7/20/2012 7:08:38 PM EDT
[Last Edit: BoredGuy87]
[#18]
My new(ish) build. Sorry for the crappy cellphone pic.
Seekins billet lower, RRA 2-stage trigger PSA upper and 16" barrel, PWS FSC556 muzzle break Troy 13" Alpha rail Aimpoint PRO in LaRue mount Surefire M300A in LaRue mount Magpul furniture with LaRue RISR  Pic from the range today  |
|
|
|
MD, USA
|
Posted: 7/20/2012 7:37:26 PM EDT
[Last Edit: jjjefferson]
[#19]
Got Wood?
I'm sure this one will go over like a Lead Balloon....but here it is. I bought a Ruger SR1911 earlier this year. I liked the look and stumbled across some Wood Furniture at the Chantilly VA Gun Show. I decided then and there I would build an AR that matches my Ruger SR1911. Since Ruger released the SR1911 for the 100th Anniversary and Spikes released this receiver set for its 10th anniversary.... I think I did ok on that LOL. And here it is: http://i1095.photobucket.com/albums/i468/AKSofty/ruger_ar_finished.jpg For those who "may" be intrested in what is in this build: Walnut Wood Furniture - Precision Arms Gaithersburg, MD Spikes Tactical Anniversary NP3 Coated Matched upper/lower Recievers. Spikes Tactical Nickel Boron BCG Stag Arms A2 Buffer kit. Stag Arms LPK. Black Rain Ordnance .223 Wylde Chambered M4 Slim Profile Barrel Carbine Length 1/8 SS JP Enterprises SS Adjustable Gas block w/ rail JP Enterprises SS Compensator Daniel Defense Burnsed Loop. Yankee Hill folding combat sights. DPMS Carbine Gas Tube Std Barrel nut, Delta Ring assy. |
|
|
|
Posted: 7/20/2012 9:17:11 PM EDT
[#20]
Originally Posted By dwshel:
My new(ish) build. Sorry for the crappy cellphone pic. Seekins billet lower, RRA 2-stage trigger PSA upper and 16" barrel, PWS FSC556 muzzle break Troy 13" Alpha rail Aimpoint PRO in LaRue mount Surefire M300A in LaRue mount Magpul furniture with LaRue RISR Pic from the range today Nice rifle. Gotta get me a Seekins. Garbage toe.  You should reallocate some funds before that thing falls off.
|
|
|
|
|
Posted: 7/20/2012 9:26:05 PM EDT
[#21]
Originally Posted By xxspudxx: Originally Posted By dwshel: My new(ish) build. Sorry for the crappy cellphone pic. Seekins billet lower, RRA 2-stage trigger PSA upper and 16" barrel, PWS FSC556 muzzle break Troy 13" Alpha rail Aimpoint PRO in LaRue mount Surefire M300A in LaRue mount Magpul furniture with LaRue RISR Pic from the range today Nice rifle. Gotta get me a Seekins. Garbage toe. You should reallocate some funds before that thing falls off.Thanks. The lower is sweet. I want to get a billet up to pair with it for a new upper build. LOL Yeah, the toe is a little jacked up. Not the first time, I'll live....I hope.
 |
|
|
|
|
Posted: 7/21/2012 12:01:06 PM EDT
[#22]
Originally Posted By jjjefferson: Got Wood? I'm sure this one will go over like a Lead Balloon....but here it is. I bought a Ruger SR1911 earlier this year. I liked the look and stumbled across some Wood Furniture at the Chantilly VA Gun Show. I decided then and there I would build an AR that matches my Ruger SR1911. Since Ruger released the SR1911 for the 100th Anniversary and Spikes released this receiver set for its 10th anniversary.... I think I did ok on that LOL. And here it is: http://i1095.photobucket.com/albums/i468/AKSofty/ruger_ar_finished.jpg For those who "may" be intrested in what is in this build: Walnut Wood Furniture - Precision Arms Gaithersburg, MD Spikes Tactical Anniversary NP3 Coated Matched upper/lower Recievers. Spikes Tactical Nickel Boron BCG Stag Arms A2 Buffer kit. Stag Arms LPK. Black Rain Ordnance .223 Wylde Chambered M4 Slim Profile Barrel Carbine Length 1/8 SS JP Enterprises SS Adjustable Gas block w/ rail JP Enterprises SS Compensator Daniel Defense Burnsed Loop. Yankee Hill folding combat sights. DPMS Carbine Gas Tube Std Barrel nut, Delta Ring assy. Nice work. I like it |
|
|
|
|
Posted: 7/21/2012 12:20:16 PM EDT
[#23]
Originally Posted By jjjefferson:
Got Wood? I'm sure this one will go over like a Lead Balloon....but here it is. I bought a Ruger SR1911 earlier this year. I liked the look and stumbled across some Wood Furniture at the Chantilly VA Gun Show. I decided then and there I would build an AR that matches my Ruger SR1911. Since Ruger released the SR1911 for the 100th Anniversary and Spikes released this receiver set for its 10th anniversary.... I think I did ok on that LOL. And here it is: http://i1095.photobucket.com/albums/i468/AKSofty/ruger_ar_finished.jpg For those who "may" be intrested in what is in this build: Walnut Wood Furniture - Precision Arms Gaithersburg, MD Spikes Tactical Anniversary NP3 Coated Matched upper/lower Recievers. Spikes Tactical Nickel Boron BCG Stag Arms A2 Buffer kit. Stag Arms LPK. Black Rain Ordnance .223 Wylde Chambered M4 Slim Profile Barrel Carbine Length 1/8 SS JP Enterprises SS Adjustable Gas block w/ rail JP Enterprises SS Compensator Daniel Defense Burnsed Loop. Yankee Hill folding combat sights. DPMS Carbine Gas Tube Std Barrel nut, Delta Ring assy. cool! some are just meant to be conversation pieces! |
|
|
|
NH, USA
|
Posted: 7/21/2012 9:23:08 PM EDT
[#24]
|
|
|
|
Posted: 7/21/2012 9:40:46 PM EDT
[#25]
I'll try to get better pics later but shitty cell phone pics shall suffice for now. RRA matched upper and lower, tight as can be with no play. Ace socom butstock also tight as hell Seekings 13" rail DD blem 16" barrel RRA 2 stage trigger Bad lever All the other Shit should be obvious Sbr and spr in the background of third pic. |
|
|
|
|
Posted: 7/22/2012 8:31:18 PM EDT
[Last Edit: ARogueNinja]
[#26]
My second build:
An early block 1.5/ 2 clone 
ETA: A true Page ownage with pics!
|
|
|
|
|
Posted: 7/23/2012 10:11:57 PM EDT
[Last Edit: Doc_Hurley]
[#27]
Okay....
Now its finally done. PSA middy lightweight kit. DoubleStar lower IKH Slap plate Magpul MOE stock VTAC 15 Aimpoint ML2 Magpul MBUS AAC Blackout 18t And I hate black on my rifles. 
Now time to start a new build. |
|
|
|
OR, USA
|
Posted: 7/23/2012 11:36:07 PM EDT
[#28]
Originally Posted By LMTRocks:
<a href="http://farm8.staticflickr.com/7259/7499354704_f9984f18a4_b.jpg" target="_blank">http://farm8.staticflickr.com/7259/7499354704_f9984f18a4_b.jpg</a> <a href="http://farm9.staticflickr.com/8157/7499357106_8b5a8608d0_b.jpg" target="_blank">http://farm9.staticflickr.com/8157/7499357106_8b5a8608d0_b.jpg </a><a href="http://farm8.staticflickr.com/7132/7499356872_38d18d3153_b.jpg" target="_blank">http://farm8.staticflickr.com/7132/7499356872_38d18d3153_b.jpg</a> <a href="http://farm9.staticflickr.com/8007/7499357622_cddee665b8_b.jpg" target="_blank">http://farm9.staticflickr.com/8007/7499357622_cddee665b8_b.jpg</a><a href="http://farm8.staticflickr.com/7272/7499355712_c21af25c5f_b.jpg" target="_blank">http://farm8.staticflickr.com/7272/7499355712_c21af25c5f_b.jpg</a> That looks just about like the perfect build to me! Nice job! Is it 5.56? I want to do something similar in 300AAC |
|
|
ME, USA
|
Posted: 7/24/2012 11:22:59 AM EDT
[#29]
|
|
|
NC, USA
|
Posted: 7/24/2012 11:59:15 PM EDT
[#30]
https://lh5.googleusercontent.com/-EQNNgH1sZGE/UA9hpOZRUyI/AAAAAAAAABc/I6wPPjcFDbc/s912/M4.jpg
14.7" PSA M4 Upper LRB lower w/DD LPK Aimpoint M2 with Wilcox mount DD 1.5 BUIS Eventually I want to swap the M2 for an M4S. And maybe replace the DD BUIS with an LMT. Scott |
|
|
|
Posted: 7/25/2012 8:21:27 AM EDT
[#31]
Originally Posted By trs717:
https://lh5.googleusercontent.com/-EQNNgH1sZGE/UA9hpOZRUyI/AAAAAAAAABc/I6wPPjcFDbc/s912/M4.jpg 14.7" PSA M4 Upper LRB lower w/DD LPK Aimpoint M2 with Wilcox mount DD 1.5 BUIS Eventually I want to swap the M2 for an M4S. And maybe replace the DD BUIS with an LMT. Scott Persoanlly I would put an arms 40 (i beleieve the time era would be correct) on for an BUIS and leave it as a kick ass earlier M4 clone! |
|
|
|
|
Posted: 7/25/2012 12:55:18 PM EDT
[Last Edit: SCWolverine]
[#32]
Top: PSA 16" Middy Upper PSA Lower Bottom: Del-ton Carbine Upper Spikes Lower SCW |
|
|
|
ME, USA
|
Posted: 7/25/2012 4:31:24 PM EDT
[Last Edit: tdunbar5]
[#33]
Originally Posted By SCWolverine:
http://www.fotolode.com/images/SCWolverine/Misc/dos.jpg Top: PSA 16" Middy Upper PSA Lower Bottom: Del-ton Carbine Upper Spikes Lower SCW Nice rifles, love a good simple rifle like your middy up top. |
|
|
NC, USA
|
Posted: 7/25/2012 8:43:56 PM EDT
[#34]
Originally Posted By sgwlower:
Originally Posted By trs717:
https://lh5.googleusercontent.com/-EQNNgH1sZGE/UA9hpOZRUyI/AAAAAAAAABc/I6wPPjcFDbc/s912/M4.jpg 14.7" PSA M4 Upper LRB lower w/DD LPK Aimpoint M2 with Wilcox mount DD 1.5 BUIS Eventually I want to swap the M2 for an M4S. And maybe replace the DD BUIS with an LMT. Scott Persoanlly I would put an arms 40 (i beleieve the time era would be correct) on for an BUIS and leave it as a kick ass earlier M4 clone! I'm not really in to the whole clone thing, that's not a bad idea though. I never really thought about it, any resemblance to an early M4 is purely coincidental. This configuration rocks, I really like how light and practical it is. |
|
|
AZ, USA
|
Posted: 7/27/2012 7:30:47 PM EDT
[Last Edit: Cactuskid]
[#35]
Here's my new middie build...
http://i1156.photobucket.com/albums/p565/bloozman99/AR15_2.jpg http://i1156.photobucket.com/albums/p565/bloozman99/AR15_1.jpg http://i1156.photobucket.com/albums/p565/bloozman99/AR15_6.jpg Lower: LMT Defender Upper: Spikes with Spikes BCG and 16" middie barrel with SEI Vortex FH Charging handle: BCM Mod 4 Buffer: Spikes T2 Stock: B5 Gen 2 SOPMOD Optics: EOTech EXPS2-0 with GG&G hood and lens covers BUIS: GG&G A2 pop-up |
|
|
FL, USA
|
Posted: 7/27/2012 8:29:41 PM EDT
[Last Edit: DucksmasherRichard]
[#36]
My first build. I built it for p-dogs and now that I got this built. Im already purchasing parts for 2nd build. cannot get pics up
80% TM lower BHW Left Hand railed upper 5.56 WOA varmit barrel CAA grip to be installed Tminey 3# trigger Mag pul PRS |
|
|
TX, USA
|
Posted: 7/30/2012 9:10:04 PM EDT
[#37]
My first build.
Spikes lower DPMS lpk A2 grip and buttstock Spikes BCG Areo Precision upper A2 peep site (take off from my buddies M&P 15) CAR gas system with rifle handguards A1 handguards A2 flash hider comp http://i146.photobucket.com/albums/r241/ehonda_kgb/Guns/007.jpg http://i146.photobucket.com/albums/r241/ehonda_kgb/Guns/009.jpg |
|
|
|
Posted: 7/30/2012 10:31:59 PM EDT
[#38]
that very confusing? why didn't you put A2 handguars on it instead of A1s or put A1 stock A1 upper A1 flash hiderand A1 grip?
|
|
|
|
|
Posted: 7/30/2012 10:34:11 PM EDT
[#39]
Originally Posted By bhouse1545:
that very confusing? why didn't you put A2 handguars on it instead of A1s or put A1 stock A1 upper A1 flash hiderand A1 grip? Confusing? These are the things that bother you? I am going to go with "he wanted to". Sharp looking dissy sir! |
|
|
|
|
Posted: 7/30/2012 10:44:21 PM EDT
[#40]
I understand that just looks confusing one retro part on A2 build looks odd to me whatever floats your boat!
|
|
|
|
TX, USA
|
Posted: 7/31/2012 6:17:59 AM EDT
[#41]
Originally Posted By bhouse1545:
that very confusing? why didn't you put A2 handguars on it instead of A1s or put A1 stock A1 upper A1 flash hiderand A1 grip? I like to call her my "A ½" |
|
|
TX, USA
|
Posted: 7/31/2012 6:24:41 AM EDT
[Last Edit: awastatyme]
[#42]
Originally Posted By sgwlower:
Originally Posted By bhouse1545:
that very confusing? why didn't you put A2 handguars on it instead of A1s or put A1 stock A1 upper A1 flash hiderand A1 grip? Confusing? These are the things that bother you? I am going to go with "he wanted to". Sharp looking dissy sir! Thanks sgwlower I like a lot of the A2 parts, but I like the A1 handguards better that the A2 handguards. Im not a big fan of the carry handles, I have a red dot that I will be mounting to it. (the mount for glass on carry handles are ugly) I have no plans to mount any accessories on it so I don't need any quad rails I also plan to hydro-dip the stock and handguards in a pepper laminate wood grain and I think the A1 handguards would look a lot better than any other handguards on the market. |
|
|
|
Posted: 7/31/2012 11:36:05 AM EDT
[#43]
Originally Posted By awastatyme:
Originally Posted By sgwlower:
Originally Posted By bhouse1545:
that very confusing? why didn't you put A2 handguars on it instead of A1s or put A1 stock A1 upper A1 flash hiderand A1 grip? Confusing? These are the things that bother you? I am going to go with "he wanted to". Sharp looking dissy sir! Thanks sgwlower I like a lot of the A2 parts, but I like the A1 handguards better that the A2 handguards. Im not a big fan of the carry handles, I have a red dot that I will be mounting to it. (the mount for glass on carry handles are ugly) I have no plans to mount any accessories on it so I don't need any quad rails I also plan to hydro-dip the stock and handguards in a pepper laminate wood grain and I think the A1 handguards would look a lot better than any other handguards on the market. I like the A1 handguards on a Dissy too 
|
|
|
|
OH, USA
|
Posted: 7/31/2012 2:57:06 PM EDT
[Last Edit: whiplash10]
[#44]
A couple recent builds :D Class/fighting/beater gun FN CHF 12" barrel (MP 1/7 4150 .066 gas port) F marked FSB Centurion carbine cutout rail Magpul RVG Stripped upper + GI charging handle BCM complete BCG Daniel Defense 1.5 fixed rear Aimpoint Comp M2 + QRP mount and spacer for 1/3 cowitness PSA stripped lower G&R tactical LPK + Geissele SD-C BAD ASS Ambi safety Vltor A5 Vltor emod Magpul MOE Vickers padded sling (w/ QD) 
MK12 High Caliber Sales MK12 upper (18" heavy barrel from Douglas blank, rifle gas, KAC URX, PRI charging handle) OPS muzzle brake LMT BCG Nightforce NXS 2.5-10x32 LaRue SPR mount Harris 6-9 bipod PSA stripped lower G&R LPK + Geissele SSA-E Vltor A5 system Vltor emod Magpul MOE+ 
|
|
|
|
Posted: 7/31/2012 5:44:05 PM EDT
[#45]
Originally Posted By whiplash10:
http://i163.photobucket.com/albums/t294/myersma2/d315296f.jpg A couple recent builds :D Class/fighting/beater gun FN CHF 12" barrel (MP 1/7 4150 .066 gas port) F marked FSB Centurion carbine cutout rail Magpul RVG Stripped upper + GI charging handle BCM complete BCG Daniel Defense 1.5 fixed rear Aimpoint Comp M2 + QRP mount and spacer for 1/3 cowitness PSA stripped lower G&R tactical LPK + Geissele SD-C BAD ASS Ambi safety Vltor A5 Vltor emod Magpul MOE Vickers padded sling (w/ QD) http://i163.photobucket.com/albums/t294/myersma2/July%201%20Range/IMG_2124.jpg http://i163.photobucket.com/albums/t294/myersma2/SBR/IMG_1737.jpg http://i163.photobucket.com/albums/t294/myersma2/SBR/15edead4.jpg MK12 High Caliber Sales MK12 upper (18" heavy barrel from Douglas blank, rifle gas, KAC URX, PRI charging handle) OPS muzzle brake LMT BCG Nightforce NXS 2.5-10x32 LaRue SPR mount Harris 6-9 bipod PSA stripped lower G&R LPK + Geissele SSA-E Vltor A5 system Vltor emod Magpul MOE+ http://i163.photobucket.com/albums/t294/myersma2/0cce72db.jpg http://i163.photobucket.com/albums/t294/myersma2/MK12/d4a0a83d.jpg http://i163.photobucket.com/albums/t294/myersma2/f49039ca.jpg Nothing wrong with either of those. 
I wish I had the balls to cerakote a rifle. It's always scared the shit out of me even though I would really like to try it. Picture thread (all of my builds): 
|
|
|
|
OH, USA
|
Posted: 8/1/2012 9:45:57 AM EDT
[#46]
Originally Posted By RyanH: I wish I had the balls to cerakote a rifle. It's always scared the shit out of me even though I would really like to try it.
Thanks but it's just good ol' Rustoleum spray paint :) no expensive coatings here |
|
|
VA, USA
|
Posted: 8/1/2012 4:52:29 PM EDT
[Last Edit: chmodx]
[#47]
Stag Arms Upper
Troy 9" Alpha Rail Troy Gas Block Franklin Armory SS Lower Magpul Grip Magpul Stock Magpul MBUS Vortex Strikefire Magpul BAD Lever Alpha Shooting Sports 16" Mid-length Lightweight Melonited Barrel (color is Foliage Green) 
|
|
|
USA
|
Posted: 8/1/2012 8:03:38 PM EDT
[#48]
This is my version of a SOPMOD Block 2 build. I guess it is more of a Block 2.5 though……….
                            Well here is the finished product minus the Tango Down QD stubby grip and Fortis "RAP" QD sling mount I still have to get. ENJOY! :mrgreen: LOWER: Quentin Defense U.S. Army Commemorative Lower (Serial # 0001) JP Lower Parts Kit KNS .155 Gen 2 Mod 2 Pins Armalite Two Stage Trigger Group Armalite Receiver Extension Armalite Buffer Spring Armalite Castle Nut Spikes Tactical ST-T2 Buffer Noveske End Plate/Single Point Sling Attachment B-5 SOPMOD Butt Stock RRA Ambidextrous Safety Selector Ergo Sure Grip UPPER: ST- FN Cold Hammer Forged 14.5 Mid-Length Barrel (ST's New Optimum barrel Profile. This New profile is lighter than government profile but beefier than a lightweight profile, it's an "Optimum" profile. It weighs 24.4oz with M4 Barrel extension and no FSB on the 14.5" Barrel. The barrels have a .750" gas block seat with a properly sized gas port and the muzzle is threaded perfectly concentric with 1/2x28 threads. These CHF barrels are made to the Mil-Spec for the M249 SAW. The Cold Hammer Forging process Work Hardens the steel around a rifled mandrel, which creates the lands and grooves. These barrels are chambered in 5.56 NATO, with a 1/7 Twist Rate. The barrel blanks are the correct Certified CMV material and they are also Hard Chrome lined to the M249 SAW Mil-Spec, which is almost twice as thick as the Hard Chrome on a Mil-Spec M4). Viltor VIS 2A 10" Monolithic Upper Receiver / Rail Combo, W /M4 Feed Ramps, Shell Deflector & Forward Assist Viltor Stainless Steel .750 Lo Pro Gas Block Viltor VC-1 Extended Flash Hider / Gemtech Halo Suppressor Mount Viltor / BCM Mod 4 (Medium) Charging Handle Viltor QD Offset Light Mount Surefire Fury Tactical 500 Lumen Light WMD Nickle Boron M-16 BCG Wilson Combat Mid-Length Gas Tube Troy H&K Front Folding Battle Sight Troy Rear Folding Battle Sight Trijicon TA31RCO-M150CP-G ACOG 4X32 Army Combat Optic Larue QD LT-100 ACOG Mount Larue Index Rail Clips                 |
|
|
MI, USA
|
Posted: 8/1/2012 8:42:14 PM EDT
[Last Edit: TJB_RIA]
[#49]
That's Sic. I'm new to AR15.com forum.
This Is what I'm Currently working with this will be my 2nd AR first build Early A1 upper (No Marks) FREE Detroit GunWorks Lower 120 CMMG LPK 60 10.5" barrel W/a2 sight 160 CAR Triangle Hanguards 30 5.5" Flash Hider 15 So Far |
|
|
AZ, USA
|
Posted: 8/1/2012 8:54:11 PM EDT
[#50]
Originally Posted By Cansler:
This is my version of a SOPMOD Block 2 build. I guess it is more of a Block 2.5 though………. Badass Build!! I live here in AZ and this is the first I have heard of Quentin Defense. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
