I bought a LOW profile pistol length system for a Seekins 10.5" barrel in .300blk and Seekins mcsr v2 handguard. (Seekins said they made the rail and nut with the AA kit in mind while they were desisigning it.) The dvd does not cover the low pro block which I believe is different from the other block. The dvd says to take out the knob and pull the rod out through the block for adjustment purposes. The rod is bigger than the hole on the low pro block. Has anyone done this before and can help me out?

Feel free to email me at [email protected] for instructions or questions.

Cody
Adams Arms
Customer Service Manager

Thanks to Phillip and Cody from AA for responding. So after some clarification from Phillip here's how it goes. Install the kit (spring, bushing, and all), then gap the block 2 business cards (or about 1/16th of an inch) off the shoulder of the barrel. I hope this helps as I've encountered alot of people needing the same instructions.