User Panel
User Panel
User Panel
VA, USA
|
Posted: 5/27/2019 3:21:34 PM EDT
[Last Edit: majette]
[#1]
meet the Gryphon:
|
|
|
|
Posted: 5/27/2019 5:22:19 PM EDT
[Last Edit: MoonDancer]
[#2]
...
|
|
|
|
USA
|
Posted: 5/27/2019 5:28:11 PM EDT
[#3]
Quote HistoryOriginally Posted By MoonDancer:
https://www.AR15.Com/media/mediaFiles/37420/Resized_20190527_171113_jpeg-959998.JPGTop: PSA 10.5" upper and BCI Defense lower. SBA3 brace, Primary Arms 3X Compact Prism scope, BCM Gunfighter Mod 3 grip, Radian Raptor CH, Strike Industries foregrip, and Franklin Armory binary trigger. Bottom: PSA Premium FN CHF 10.5" upper on a PSA M4A1 lower. CMMG LPK, SBA4 brace, Toolcraft NiB BCG, Radian Raptor SD CH, LMT fixed rear sight, and a Fostech Echo IIbinary trigger. A Troy Industries quad rail has been ordered for it. |
|
|
|
Posted: 5/27/2019 8:32:42 PM EDT
[#4]
PSA 10.5" Nitride upper BCM Mod3B CH KAW Valley Linear Comp PSA Holloween -15 (REAPER lower) Larue MBT2S trigger K2+ Magpul grip PSA SBA3 pistol brace kit Primary Arms 1-8x SFP scope w/ Griffin ACSS reticle Bobro mount |
|
|
|
VA, USA
|
Posted: 5/27/2019 8:46:04 PM EDT
[#5]
Quote HistoryOriginally Posted By kmart356:
SBA3 on some distressed A1 bits https://www.AR15.Com/media/mediaFiles/73999/A1_10_5in_pistol_JPG-951671.JPG |
|
|
MD, USA
|
Posted: 5/29/2019 11:14:52 AM EDT
[Last Edit: RwithThe40]
[#6]
Quote HistoryOriginally Posted By Doodles: @RwithThe40 very well done. 
Nice job on the color fill. You should post that over at the PSA has lost a customer thread. I have seen that thread but I never bothered to click on it since PSA is not on my shit list lol My bank account loves the low prices and the quality is comparable to other rifles that cost double. I’ll check it out though 👍🏼 |
|
|
|
Posted: 5/29/2019 11:50:19 AM EDT
[Last Edit: Doodles]
[#7]
Quote HistoryOriginally Posted By RwithThe40: Thanks! It took a long time, and I’m still not happy with how dull the gold came out. I might try it with a different paint. I have seen that thread but I never bothered to click on it since PSA is not on my shit list lol My bank account loves the low prices and the quality is comparable to other rifles that cost double. I’ll check it out though 👍🏼 
Pic thread so here's my Turkey-15 
|
|
|
|
OH, USA
|
Posted: 5/29/2019 5:27:37 PM EDT
[#8]
Aero Precision receivers, Aero Precision nitride BCG, Ballistic Advantage 10.3-inch Hanson barrel, Midwest Industries 9.25-inch Combat rail, Geissele ACH, ALG ACT trigger, SBA3 brace w/Splitfix and Vortex Crossfire red dot. |
|
|
|
Posted: 5/29/2019 6:13:00 PM EDT
[#9]
Quote HistoryOriginally Posted By jonm78:
https://i.imgur.com/Qcz0OeE.jpg Aero Precision receivers, Aero Precision nitride BCG, Ballistic Advantage 10.3-inch Hanson barrel, Midwest Industries 9.25-inch Combat rail, Geissele ACH, ALG ACT trigger, SBA3 brace w/Splitfix and Vortex Crossfire red dot. |
|
|
|
USA
|
Posted: 5/29/2019 7:19:17 PM EDT
[#10]
Quote HistoryOriginally Posted By Doodles:
https://www.AR15.Com/media/mediaFiles/485060/IMG_0942_JPG-960257.jpg PSA 10.5" Nitride upper BCM Mod3B CH KAW Valley Linear Comp PSA Holloween -15 (REAPER lower) Larue MBT2S trigger K2+ Magpul grip PSA SBA3 pistol brace kit Primary Arms 1-8x SFP scope w/ Griffin ACSS reticle Bobro mount this combination is seriously in my mind |
|
|
|
Posted: 5/30/2019 12:36:34 AM EDT
[Last Edit: Doodles]
[#11]
Quote HistoryOriginally Posted By togadelic: any problems with the acss reticle bds with that barrel length? this combination is seriously in my mind Nope, no issue. I use the Strelok Pro ballistic calculator which has the reticle. I put in my data and it automatically calculates the correct BDs. Using a 50 yard zero gives a point blank to 175 yards. The reticle lines up for my combination with XM193 @ 2800 FPS: 50/175 (200) 292 (300) 379 (400) 450 509 (500) 561 (550) I just round to make it easy to remember. Close enough for a fighting pistol. 
|
|
|
|
|
Posted: 5/30/2019 5:13:22 PM EDT
[#12]
|
|
|
|
|
Posted: 5/31/2019 2:48:00 PM EDT
[Last Edit: Solo_]
[#13]
Just bought me (and installed) this CMMG Steel .22LR conversion kit (steel bolt conversion kit).
Can't wait to shoot 'economically' 
A2 clone .22LR Conversion kit by SoloDallas, on Flickr |
|
|
|
OH, USA
|
Posted: 6/1/2019 2:12:27 PM EDT
[#14]
Quote HistoryOriginally Posted By SoloDallas:
Just bought me (and installed) this CMMG Steel .22LR conversion kit (steel bolt conversion kit). Can't wait to shoot 'economically' https://live.staticflickr.com/65535/47973905923_0b9e36326d_b.jpg A2 clone .22LR Conversion kit by SoloDallas, on Flickr |
|
|
VA, USA
|
Posted: 6/1/2019 7:17:59 PM EDT
[Last Edit: Deadsquiggles]
[#15]
My first AR pistol (technically “firearm”)
It’s kind of a quasi FBI clone. Poverty pony lower, MBT, Stag LPK, Spikes ST-T2 buffer, SBA3 Aero upper, Toolcraft BCG, BA 11.5” Gov’t profile barrel and GB, Geissele Mk8 DDC 9.5” handguard, Raptor CH, A2 FH, Arms 71 BUIS, Surefire G2 in Arisaka mount with PA Tapeswitch, AP PRO And based on my tape measure, it’s 26 1/4” long to the end of the muzzle threads with the brace collapsed. 
|
|
|
|
Posted: 6/2/2019 7:10:30 AM EDT
[#16]
|
|
|
|
|
Posted: 6/2/2019 4:48:42 PM EDT
[#17]
Quote HistoryOriginally Posted By Leonitus:
https://www.AR15.Com/media/mediaFiles/455572/69E13C95-BAFC-4691-B732-3D1CA382209D-957784.jpg |
|
|
|
TX, USA
|
Posted: 6/4/2019 12:48:48 PM EDT
[#18]
Ever changing, but here's what I have so far.
Lower one is 300 AAC and upper is 5.56. 
|
|
|
MI, USA
|
Posted: 6/6/2019 10:16:23 AM EDT
[#19]
Quote HistoryOriginally Posted By Gr8Santini:
22 Lr peestol https://www.AR15.Com/media/mediaFiles/23396/92BB5FC5-E496-406B-A626-91577C4ADDE0-935517.jpg https://www.AR15.Com/media/mediaFiles/23396/BCF81578-956E-4BEB-A8B6-161F82761892-935518.jpg https://www.AR15.Com/media/mediaFiles/23396/256AB504-1673-4F7D-870D-22B61F468E87-935520.jpg |
|
|
|
Posted: 6/6/2019 1:44:42 PM EDT
[#20]
It still needs BCG, charging handle, iron sights. Thoughts? |
|
|
|
|
Posted: 6/6/2019 1:53:47 PM EDT
[Last Edit: Doodles]
[#21]
Quote HistoryOriginally Posted By FstFrd00:
https://i.imgur.com/B7dcCQG.jpg It still needs BCG, charging handle, iron sights. Thoughts? Serious use I would suggest PSA premium or any (HPT/MPI) BCG, BCM MOD3B CH, and Magpul MBUS PRO sights. Range use I would suggest any PSA BCG, Strike Industries or BCM CH, and Magpul poly MBUS. Looks good. I like the mini flash can. EDIT: Those parts are just "my" goto's. There are so many good parts out now it really depends on how much you want to spend and flavor preference. |
|
|
|
|
Posted: 6/6/2019 11:45:20 PM EDT
[Last Edit: daddyusmaximus]
[#22]
New, and used part frankengun... PSA 10.5" barrel, and lower, Delta Team A1 upper...
|
|
|
|
|
Posted: 6/7/2019 7:59:49 AM EDT
[#23]
Quote HistoryOriginally Posted By Doodles: Depends on your application. Serious use I would suggest PSA premium or any (HPT/MPI) BCG, BCM MOD3B CH, and Magpul MBUS PRO sights. Range use I would suggest any PSA BCG, Strike Industries or BCM CH, and Magpul poly MBUS. Looks good. I like the mini flash can. EDIT: Those parts are just "my" goto's. There are so many good parts out now it really depends on how much you want to spend and flavor preference. What really sold me on the flash can was the looks. |
|
|
|
TX, USA
|
Posted: 6/7/2019 2:09:26 PM EDT
[#24]
Quote HistoryOriginally Posted By daddyusmaximus:
New, and used part frankengun... PSA 10.5" barrel, and lower, Delta Team A1 upper... https://i.imgur.com/qg75SSe.jpg |
|
|
|
Posted: 6/7/2019 2:31:00 PM EDT
[#25]
Quote HistoryOriginally Posted By jeremywills: I like that alot. I assume that is an absolute co witness riser for the red dot? Just seems like having a dot, and the sights on two different planes would throw me off. |
|
|
|
FL, USA
|
Posted: 6/7/2019 4:09:11 PM EDT
[Last Edit: SeeversCPA]
[#26]
My first AR build, ever, pistol or otherwise. Putting together the lower was surprisingly easy. I actually used a Glock 1/8th inch punch for the roll pins. I did get some roll-pin punches from Brownells, that I used to get the trigger guard roll pin flush. I didn't use a vise, but did use some wood scraps to support the trigger guard roll pin install, as the build video I watched showed some pics of broken trigger guard "ears" and how to avoid that.
PSA 10.5" Pistol Kit - this one https://palmettostatearmory.com/psa-10-5-5-56-nato-1-7-nit-12-slant-m-lok-moe-ept-sba3-pk.html PSA Safe/Fire stripped Lower - this one https://palmettostatearmory.com/psa-ar-15-lower-safe-fire-1728.html Sig Romeo 5 I had on a shotgun American Defense QD mount (the absolute co-witness variety) Odin Works 1" light mount with Sure 6P with a Malkoff drop-in head (450 Lumen). I bought that light prior to 2000 - Link to the drop-in https://malkoffdevices.com/products/m61-mod-to-fit-surefire-and-malkoff Strike Industries hand stop Radian ambi charging handle - took it off another long gun I have. BCM QD endplate and finally, a Lunar Concepts Split Fix in Multicam Black, replaced the original PSA branded SBA 3 brace strap I zeroed the rifle using the mount that came with the Sig Romeo 5. I need to re-zero the rifle with the use of the AD mount. That light mount was not there when I zeroed the rifle. Does anyone think I have it to close to the muzzle? I do have it back 1/2 inch from the leading edge of the flash can. I know how I can get a definitive answer, but in case anyone has personal experience they want to pass on, please do  
|
|
|
|
Posted: 6/7/2019 5:01:23 PM EDT
[Last Edit: Doodles]
[#27]
Quote HistoryOriginally Posted By SeeversCPA:
My first AR build, ever, pistol or otherwise. Putting together the lower was surprisingly easy. I actually used a Glock 1/8th inch punch for the roll pins. I did get some roll-pin punches from Brownells, that I used to get the trigger guard roll pin flush. I didn't use a vise, but did use some wood scraps to support the trigger guard roll pin install, as the build video I watched showed some pics of broken trigger guard "ears" and how to avoid that. PSA 10.5" Pistol Kit - this one https://palmettostatearmory.com/psa-10-5-5-56-nato-1-7-nit-12-slant-m-lok-moe-ept-sba3-pk.html PSA Safe/Fire stripped Lower - this one https://palmettostatearmory.com/psa-ar-15-lower-safe-fire-1728.html Sig Romeo 5 I had on a shotgun American Defense QD mount (the absolute co-witness variety) Odin Works 1" light mount with Sure 6P with a Malkoff drop-in head (450 Lumen). I bought that light prior to 2000 - Link to the drop-in https://malkoffdevices.com/products/m61-mod-to-fit-surefire-and-malkoff Strike Industries hand stop Radian ambi charging handle - took it off another long gun I have. BCM QD endplate and finally, a Lunar Concepts Split Fix in Multicam Black, replaced the original PSA branded SBA 3 brace strap I zeroed the rifle using the mount that came with the Sig Romeo 5. I need to re-zero the rifle with the use of the AD mount. That light mount was not there when I zeroed the rifle. Does anyone think I have it to close to the muzzle? I do have it back 1/2 inch from the leading edge of the flash can. I know how I can get a definitive answer, but in case anyone has personal experience they want to pass on, please do Snip*
|
|
|
|
FL, USA
|
Posted: 6/7/2019 5:18:00 PM EDT
[#28]
Thanks Doodles.
Is that an ACSS reticle prism scope you have? I was contemplating adding 3X magnification behind the red dot, but the rail starts getting cluttered and that adds more and more weight to the rifle. It would be nice to have some factor of magnification. Primary Arms has some entry-level 3X mag and QD swing mount for like $170 On the other hand, I've seen some of the Primary Arms 2.5X, 3X, 5X ACSS reticle prism scopes and they seem to be a great value. They have a 2.5 X 32 right now $239 on their site. An opinion one way or the other on red dot + mag versus low power scope? I a not looking to touch things past 100Yds with this. I have another long gun for that. |
|
|
|
Posted: 6/7/2019 6:22:53 PM EDT
[Last Edit: Doodles]
[#29]
Quote HistoryOriginally Posted By SeeversCPA:
Thanks Doodles. Is that an ACSS reticle prism scope you have? I was contemplating adding 3X magnification behind the red dot, but the rail starts getting cluttered and that adds more and more weight to the rifle. It would be nice to have some factor of magnification. Primary Arms has some entry-level 3X mag and QD swing mount for like $170 On the other hand, I've seen some of the Primary Arms 2.5X, 3X, 5X ACSS reticle prism scopes and they seem to be a great value. They have a 2.5 X 32 right now $239 on their site. An opinion one way or the other on red dot + mag versus low power scope? I a not looking to touch things past 100Yds with this. I have another long gun for that.
The beauty of this particular upper is the light weight and maneuvering speed. I think it's best roll is CQB type situations. I can't use red dots due to my aging eyes so I went with the PA 1x Cyclops. I think PA prism scopes are great. They're tough, cheap and the ACSS reticle design is great. The Cyclops is like having a red dot with built in backup. Even if the batteries or electronics take a dump it still has a reticle. I have two 3x's on my general purpose carbines. The 2.5x is solid I have 2 of them but I prefer the 3x because the reticle center dot and hold ladder is easier for me to pickup. Any of the PA prism scopes would serve you well. I don't think in the <100 yard roll I would go 5x though because more narrow FOV and it's reticle is slower to pickup compared to the M1 in the 2.5x and M2 in the 3x. I've never been a fan of the piggy back magnifiers. I ran one for awhile when my eyes were still good but it wasn't for me. It added bulkiness and weight. I found it annoying having something hanging off the side. A lot of people love that set up and it works for them. I'm a K.I.S.S. type of guy. If I need variable magnification I'll grab an AR with a LPVO. I agree some magnification is beneficial past 50 yards, especially with aging eyes. 
Pic thread so... 
|
|
|
|
VT, USA
|
Posted: 6/7/2019 7:11:58 PM EDT
[#30]
Palmetto State AR9, I'll have to take some shots of my other pistol for you guys.
Upgrade List: No Name Picatinny Riser Ade Bertrillium Red Dot (one of the best sub $100 sights I've tried) JP Trigger Springs and Pre-travel/Creep Screw Bull Moose Trigger Group Mirror Polished Sear/Hammer Trinity Force Foregrip (Modified to fit Mlok) Timber Creek Red Ambi Safety No Name Red Trigger Pin Kit No Name Red Ambi Charging Handle Odin Works XGMR Red Extended Mag Release No Name Red Muzzle Brake & Forwarder Strike Industries Red Take Down Pins No Name Red Milspec Buffer Tube Alpha D-One 9" Mlok Rail No Name BAD Lever SBTactical SBA4 Brace Magpul MOE Grip Magpul G19 Magazine No Name Mag +5 Extension NCStar Flashlight |
|
|
|
Posted: 6/7/2019 7:39:17 PM EDT
[Last Edit: Doodles]
[#31]
Quote HistoryOriginally Posted By Raymo2u:
Palmetto State AR9, I'll have to take some shots of my other pistol for you guys. https://i.gyazo.com/b967c5f44b58e0196147d55812889671.jpg https://i.gyazo.com/6a506e68ac53d509c7f7a49ebc1bdac1.jpg https://i.gyazo.com/a90ac6418f79a2227c04a736dbf64192.jpg https://i.gyazo.com/280b9374b2dbae39695eb3eb00e8b745.jpg https://i.gyazo.com/81dce12b12e59b3650516f77cc35ac02.jpg Upgrade List: No Name Picatinny Riser Ade Bertrillium Red Dot (one of the best sub $100 sights I've tried) JP Trigger Springs and Pre-travel/Creep Screw Bull Moose Trigger Group Mirror Polished Sear/Hammer Trinity Force Foregrip (Modified to fit Mlok) Timber Creek Red Ambi Safety No Name Red Trigger Pin Kit No Name Red Ambi Charging Handle Odin Works XGMR Red Extended Mag Release No Name Red Muzzle Brake & Forwarder Strike Industries Red Take Down Pins No Name Red Milspec Buffer Tube Alpha D-One 9" Mlok Rail No Name BAD Lever SBTactical SBA4 Brace Magpul MOE Grip Magpul G19 Magazine No Name Mag +5 Extension NCStar Flashlight 
Nice glamor shots, I'll be over in the corner with my ipotato pics.
|
|
|
|
USA
|
Posted: 6/7/2019 7:41:50 PM EDT
[Last Edit: mezzano1]
[#32]
Deleted
|
|
|
VT, USA
|
Posted: 6/7/2019 7:44:41 PM EDT
[#33]
Quote HistoryOriginally Posted By Doodles: That's pure sex.
Nice glamor shots, I'll be over in the corner with my ipotato pics. 
I appreciate the kind words 
|
|
|
|
Posted: 6/7/2019 7:49:19 PM EDT
[Last Edit: Doodles]
[#34]
Quote HistoryOriginally Posted By Raymo2u:
Now only if the shots would show and not just hyperlinks
I appreciate the kind words
|
|
|
|
|
Posted: 6/7/2019 7:51:45 PM EDT
[#35]
Quote HistoryOriginally Posted By Raymo2u:
Now only if the shots would show and not just hyperlinks
I appreciate the kind words |
|
|
|
VT, USA
|
Posted: 6/7/2019 7:56:30 PM EDT
[Last Edit: Raymo2u]
[#36]
Quote HistoryOriginally Posted By Doodles:
Edit: they may have to be approved by team members first. I approved. Quote HistoryOriginally Posted By Doodles:
Edit: they may have to be approved by team members first. I approved. Originally Posted By Make_Mine_Moxie:
It's because you have less than 50 posts. Nice photos. |
|
|
|
Posted: 6/7/2019 8:17:22 PM EDT
[#37]
Quote HistoryOriginally Posted By Raymo2u:
Palmetto State AR9, I'll have to take some shots of my other pistol for you guys. https://i.gyazo.com/b967c5f44b58e0196147d55812889671.jpg https://i.gyazo.com/6a506e68ac53d509c7f7a49ebc1bdac1.jpg https://i.gyazo.com/a90ac6418f79a2227c04a736dbf64192.jpg https://i.gyazo.com/280b9374b2dbae39695eb3eb00e8b745.jpg https://i.gyazo.com/81dce12b12e59b3650516f77cc35ac02.jpg Upgrade List: No Name Picatinny Riser Ade Bertrillium Red Dot (one of the best sub $100 sights I've tried) JP Trigger Springs and Pre-travel/Creep Screw Bull Moose Trigger Group Mirror Polished Sear/Hammer Trinity Force Foregrip (Modified to fit Mlok) Timber Creek Red Ambi Safety No Name Red Trigger Pin Kit No Name Red Ambi Charging Handle Odin Works XGMR Red Extended Mag Release No Name Red Muzzle Brake & Forwarder Strike Industries Red Take Down Pins No Name Red Milspec Buffer Tube Alpha D-One 9" Mlok Rail No Name BAD Lever SBTactical SBA4 Brace Magpul MOE Grip Magpul G19 Magazine No Name Mag +5 Extension NCStar Flashlight
|
|
|
|
VT, USA
|
Posted: 6/7/2019 8:27:03 PM EDT
[Last Edit: Raymo2u]
[#38]
Originally Posted By StarCityShooter: An AR had no name
|
|
|
PA, USA
|
Posted: 6/8/2019 11:01:41 AM EDT
[Last Edit: Metzger31]
[#39]
|
|
|
|
Posted: 6/8/2019 9:09:05 PM EDT
[#40]
|
|
|
|
|
Posted: 6/8/2019 9:46:45 PM EDT
[Last Edit: Solo_]
[#41]
Changing little things here and there - for the looks
Colt 733 A1 by SoloDallas, on Flickr 
Colt 733 Clones, A1 and A2 |
|
|
|
TX, USA
|
Posted: 6/9/2019 2:23:37 AM EDT
[Last Edit: jeremywills]
[#42]
Quote HistoryOriginally Posted By SeeversCPA:
My first AR build, ever, pistol or otherwise. Putting together the lower was surprisingly easy. I actually used a Glock 1/8th inch punch for the roll pins. I did get some roll-pin punches from Brownells, that I used to get the trigger guard roll pin flush. I didn't use a vise, but did use some wood scraps to support the trigger guard roll pin install, as the build video I watched showed some pics of broken trigger guard "ears" and how to avoid that. PSA 10.5" Pistol Kit - this one https://palmettostatearmory.com/psa-10-5-5-56-nato-1-7-nit-12-slant-m-lok-moe-ept-sba3-pk.html PSA Safe/Fire stripped Lower - this one https://palmettostatearmory.com/psa-ar-15-lower-safe-fire-1728.html Sig Romeo 5 I had on a shotgun American Defense QD mount (the absolute co-witness variety) Odin Works 1" light mount with Sure 6P with a Malkoff drop-in head (450 Lumen). I bought that light prior to 2000 - Link to the drop-in https://malkoffdevices.com/products/m61-mod-to-fit-surefire-and-malkoff Strike Industries hand stop Radian ambi charging handle - took it off another long gun I have. BCM QD endplate and finally, a Lunar Concepts Split Fix in Multicam Black, replaced the original PSA branded SBA 3 brace strap I zeroed the rifle using the mount that came with the Sig Romeo 5. I need to re-zero the rifle with the use of the AD mount. That light mount was not there when I zeroed the rifle. Does anyone think I have it to close to the muzzle? I do have it back 1/2 inch from the leading edge of the flash can. I know how I can get a definitive answer, but in case anyone has personal experience they want to pass on, please do https://i.imgur.com/0X06qsZ.jpg https://i.imgur.com/WFq9EiE.jpg https://i.imgur.com/tYEUDl7.jpg https://i.imgur.com/dJiJStX.jpg https://i.imgur.com/0Nw62XI.jpg https://i.imgur.com/6cBl68Z.jpg |
|
|
|
Posted: 6/9/2019 6:58:00 AM EDT
[#43]
Quote HistoryOriginally Posted By SoloDallas:
Changing little things here and there - for the looks https://live.staticflickr.com/65535/48027463056_0f0e0dfdb8_b.jpg Colt 733 A1 by SoloDallas, on Flickr https://live.staticflickr.com/65535/48027568037_20a94fa2e0_h.jpg Colt 733 Clones, A1 and A2 |
|
|
|
|
Posted: 6/9/2019 12:03:49 PM EDT
[#44]
Quote HistoryOriginally Posted By boerseun:
The new braces actually look better than I initially thought they would. Great looking "colts"! |
|
|
|
|
Posted: 6/9/2019 4:27:05 PM EDT
[#45]
Family photo. Just finished and shot the bottom one today, 12" 6.5G that is going to take over nighttime hunting duty. Nice grouping with the thermal right off the bat, functioned well and I got the AGB right pretty easily too.
Top pistol is an 8.3" 300blk that is going to do HD work now. Cans are form 1s. All painting by yours truly.  Attached File |
|
|
|
TX, USA
|
Posted: 6/9/2019 10:35:24 PM EDT
[Last Edit: HK_MARK23]
[#46]
Just waiting on my Strike Industries brace
|
|
|
|
Posted: 6/10/2019 1:37:22 AM EDT
[#47]
|
|
|
|
FL, USA
|
Posted: 6/10/2019 2:30:23 PM EDT
[#48]
Quote HistoryOriginally Posted By jeremywills: I also like yours too. Good looking rig. However............. and this is just a personal pet peeve of mine may I kindly suggest you remount your American Defense 180 degrees so the lever is on the non port side. The sight of the American flag running away from the muzzle just makes me sad but hey, it's your rifle. Do what you want. That particular rail PSA used for that kit looks wicked. Happy range days to you sir. |
|
|
|
Posted: 6/10/2019 2:48:08 PM EDT
[#49]
Quote HistoryOriginally Posted By Raymo2u:
Palmetto State AR9, I'll have to take some shots of my other pistol for you guys. https://i.gyazo.com/b967c5f44b58e0196147d55812889671.jpg https://i.gyazo.com/6a506e68ac53d509c7f7a49ebc1bdac1.jpg https://i.gyazo.com/a90ac6418f79a2227c04a736dbf64192.jpg https://i.gyazo.com/280b9374b2dbae39695eb3eb00e8b745.jpg https://i.gyazo.com/81dce12b12e59b3650516f77cc35ac02.jpg Upgrade List: No Name Picatinny Riser Ade Bertrillium Red Dot (one of the best sub $100 sights I've tried) JP Trigger Springs and Pre-travel/Creep Screw Bull Moose Trigger Group Mirror Polished Sear/Hammer Trinity Force Foregrip (Modified to fit Mlok) Timber Creek Red Ambi Safety No Name Red Trigger Pin Kit No Name Red Ambi Charging Handle Odin Works XGMR Red Extended Mag Release No Name Red Muzzle Brake & Forwarder Strike Industries Red Take Down Pins No Name Red Milspec Buffer Tube Alpha D-One 9" Mlok Rail No Name BAD Lever SBTactical SBA4 Brace Magpul MOE Grip Magpul G19 Magazine No Name Mag +5 Extension NCStar Flashlight
|
|
|
|
PA, USA
|
Posted: 6/10/2019 11:38:40 PM EDT
[#50]
What type of muzzle device is that?
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File