User Panel
Quoted: Thank you for your feedback I do like the idea of the UBR gen II being a single unit/tube. I'm sure it firms up the slop some, but how heavy, relative to other stocks are they? It seems I hear those UBR stocks are heavy and many people swap them out, but maybe those are not Gen II. Those are Gen I rigs.....the new Gen II is 40 percent lighter. To me, it doesn't matter about the weight because the UBR is just an awesome stock. I am willing to pay the penalty. Well it seems you are confirming my findings that muzzle breaks are not friendly unless suppressed. Guess I need some more research and thought. Thinking that if I was hunting, I wouldn't want/need the use of the suppressor due to added length and weight. But at the range, well I guess I could run it suppressed most/all of the time. View Quote |
|
I am sure this has been answered already, but I was unable to find it looking through LOTS of the previous post.
So...I just order a Maten set with the extended, 16" hand guard and am wanting to use a 16" barrel. Will a 16" barrel be flush with the hand guard, or will the hand guard extend past the end of the barrel? I will be good if it is flush, as I will be using a brake. But if it actually extends past a 16" barrel, then I guess I will have to go with a 18" barrel. Thanks in advance. |
|
The 16" measurement of the barrel is from the bolt face to the end of the muzzle. You may lose a little bit from what's in the receiver, but not much. It will be pretty close to the same as your handguard.
Also, keep in mind that your brake threads on to the end of the barrel and extends forward from there probably AT LEAST an inch, if not 1.5". |
|
Tried search but could not find the answer and did not have time to go through 99 pages so forgive me if it has been asked before:
Will Maten lowers mate to an AR-10 upper and vice versa or are they different cuts? |
|
|
I just spoke with Mega and they told me the extended (16") hand guard will be 3/4" LONGER then a 16" barrel. Or from the other direction, the barrel will end 3/4" befor the end of the extended hand guard.
So I guess I will go with a 18" barrel. Kinda bummed as I had my heart set on on a 16" barrel setup. |
|
Quoted:
The extended handguard will be just slightly short of flush with the barrel. http://i63.tinypic.com/2laana8.jpg View Quote That looks like the extended RIFLE length (14") HG and not the "mega extended" which is 16" |
|
|
if you're running the suppressor on and off, why did you choose the seekins AGB over others that are easier to dial in settings for suppressed/not suppressed?
I'm trying to decide on gas blocks right now so asking all questions to help me decide on which one to go with. I don't see any of the models that had multiple settings on the gas block for suppressed/unsupp./off. So I'm eyeing the SLR gentry 7 as it at least has positive clicks for adjustment that I may be able to manually adjust in the field. |
|
Quoted:
if you're running the suppressor on and off, why did you choose the seekins AGB over others that are easier to dial in settings for suppressed/not suppressed? I'm trying to decide on gas blocks right now so asking all questions to help me decide on which one to go with. I don't see any of the models that had multiple settings on the gas block for suppressed/unsupp./off. So I'm eyeing the SLR gentry 7 as it at least has positive clicks for adjustment that I may be able to manually adjust in the field. View Quote The SLR is without a doubt the best adjustable gas block you can get in my mind. I have it on every one of my builds and I run those all suppressed as well. As for having to constantly adjust it in the field, what I did was took the round and load I knew I would primarily shoot through each rifle and found the minimal adjustment to make the rifle cycle. That way when I put on the can, the back pressure increases but not to gross extent and I know everything will work without having to take out the small tool and adjust on the fly. |
|
Quoted:
if you're running the suppressor on and off, why did you choose the seekins AGB over others that are easier to dial in settings for suppressed/not suppressed? I'm trying to decide on gas blocks right now so asking all questions to help me decide on which one to go with. I don't see any of the models that had multiple settings on the gas block for suppressed/unsupp./off. So I'm eyeing the SLR gentry 7 as it at least has positive clicks for adjustment that I may be able to manually adjust in the field. View Quote The SLR is easily one of the best adjustable gas blocks on the market. But if you want the ability to adjust on the fly, the MicroMOA is what you want. |
|
Thanks for all the help guys! I've updated my list with parts I've ordered and things still to be ordered, mainly the stock and on which AAC to go with, blackout, brakeout, or muzzle break. I think I'm a little afraid of the muzzle break to be used when running non suppressed. Thinking about a brakeout 2...
|
|
I pretty much did what he said above.I adjusted my gas block to work with a wide range of ammo while still being reliable.You could easily turn it down enough to make it barely cycle anything but then its likely you would run into issues if you get a light load.I set it and then set the lock screw so I don't have to worry about it again
the brakeout is pretty much good at nothing.Its loud and doesn't cut much recoil while still keeping plenty of flash since its got a set of big ports.Either pick the full brake or the flash hider depending on which you need more |
|
Noob question and probably obvious.
I'm (starting out with) a Magpul CTR collapsible stock on my Maten. Will I need to get a buffer tube assembly that includes a castle nut so as to properly orient the channel on the bottom of the buffer tube? |
|
Quoted:
Noob question and probably obvious. I'm (starting out with) a Magpul CTR collapsible stock on my Maten. Will I need to get a buffer tube assembly that includes a castle nut so as to properly orient the channel on the bottom of the buffer tube? View Quote Yes. The end plate will orient the receiver extension properly and the caste nut with tighten it down. |
|
Hey All:
Just wanted to update this thread with some new info that others will find helpful, and maybe upsetting... The Armalite magazine catch is NO LONGER available to purchase, or at least by itself. In fact, no Armalite parts are available for purchase. The only way you are gonna get any part is to buy a complete parts kit. Not willing to pay 60 bucks for the whole parts kit just for this one part, nor do I want to give them any business.. Sorry if this is common knowledge to all, but it sure wasn't to me. |
|
Quoted: Hey All: Just wanted to update this thread with some new info that others will find helpful, and maybe upsetting... The Armalite magazine catch is NO LONGER available to purchase, or at least by itself. In fact, no Armalite parts are available for purchase. The only way you are gonna get any part is to buy a complete parts kit. Not willing to pay 60 bucks for the whole parts kit just for this one part, nor do I want to give them any business.. Sorry if this is common knowledge to all, but it sure wasn't to me. View Quote |
|
I've been contacting the few Armalite vendors and asking them if they can confirm, and none of them seem to have a clue. It appears Armalite hasn't told any of them. They are just not fulfilling their orders. I've spoken to a few so far and they did comment that it's been awhile since they've received anything from them. I suppose some vendors might just buy the complete LPK's and break them up to sell parts individually, but as of now that's not happening. I sure would be PIST if I had an Armalite AR10 and broke a spring or any part and they told me I would have to buy the complete LPK to get it.
I am glad now that I chose the DPMS route to build my MaTen, even though I hear a lot of gripe about DPMS quality. I don't like supporting companies that treat customers like crap. I just hope the DPMS magazine catch that I had to order functions well... UPDATE: I spoke to someone at DSG and they checked into this, and said that they were told this is not the case, and they should be receiving parts soon. Hopefully this is true and I was told wrong. |
|
Hey All:
I know this thread is pretty non active, but I'm hoping that from all of you who have built these Matens, that maybe someone could help me find a Panther Claw to buy used, rent, or something. I couldn't find one on the EE. Heck I can't find them available new. I really hate to buy one new as I know I won't be ever using it again. Anyone know of where I can find one? If anyone has one and willing to let me borrow/rent it, please contact me. From what I gather I need the .308 claw, not the AR15 claw, correct? Anyways bummed I'm stuck in my build with no way to safely tighten my barrel nut.. |
|
So, the standard bolt catch and mag release from an AR15 lower kit will work?
I read conflicting things. Also, if I go the DPMS bolt catch patch, do I need the DPMS bolt catch screw? Sorry if it was covered and thanks! |
|
Quoted:
So, the standard bolt catch and mag release from an AR15 lower kit will work? I read conflicting things. Also, if I go the DPMS bolt catch patch, do I need the DPMS bolt catch screw? Sorry if it was covered and thanks! View Quote the mag catch is standard ar15 and you will need to supply. The bolt catch, i believe, depends on what you buy from mega. I, for instance, bought a matching upper lower, the ambi version, along with a MML handguard. Mine came with the bolt catch installed. So if you don't have your upper yet, you should buy this first to see if it comes with the bolt catch. |
|
Quoted:
the mag catch is standard ar15 and you will need to supply. The bolt catch, i believe, depends on what you buy from mega. I, for instance, bought a matching upper lower, the ambi version, along with a MML handguard. Mine came with the bolt catch installed. So if you don't have your upper yet, you should buy this first to see if it comes with the bolt catch. View Quote View All Quotes View All Quotes Quoted:
Quoted:
So, the standard bolt catch and mag release from an AR15 lower kit will work? I read conflicting things. Also, if I go the DPMS bolt catch patch, do I need the DPMS bolt catch screw? Sorry if it was covered and thanks! the mag catch is standard ar15 and you will need to supply. The bolt catch, i believe, depends on what you buy from mega. I, for instance, bought a matching upper lower, the ambi version, along with a MML handguard. Mine came with the bolt catch installed. So if you don't have your upper yet, you should buy this first to see if it comes with the bolt catch. I bought my lower from j&g and my upper from jse and the lower came with the bolt catch installed.As far as I can tell the lowers all come with everything needed installed except for the fire control components,magazine catch/spring/detent and the safety spring and detent. |
|
I think I have a 6.5 Creedmoor inbound. Hoping to nail page 100 and post a pic soon.
|
|
Quoted:
Thanks. Do you own a Maten with the extended hand guard? I only ask because I have a 15 1/2" Hand guard on my SCR build and with a 16" JP barrel, the threaded portion of the barrel is actually inside the hand guard. See attached picture. So that is why I am wondering about the Maten upper with the extended (not the extended rifle length which is 14") 16" HG and a 16" barrel will work. Looking at the pictures of the upper it seems the barrel extension sits back inside the received before the HG area starts. Looks like it might actually "add" an inch or so to the overall length of the HG if that makes sense? https://s31.postimg.org/7qslq9kiz/DSC01498_Copy.jpg View Quote what stock is that on the pictured rifle? thank you |
|
That is a ARES SCR lower with the Monte Carlo stock.
And to follow up on my question on the Mega Extended length upper and a 16" barrel....it worked out great using a Smith enterprises brake. Will post up pics soon. |
|
|
No bother. That is what we are here for...gathering information. If you search, there is a very large thread on the SCR here in the site.
The upper is a Gibbz Arms with the matching extra long (15 1/2") hand guard. |
|
|
Just to keep the thread going....my old 6.5CM build. Maten upper/lower set. JP barrel, hand guard, low mass BCG, silent capture spring, AR Gold trigger, etc. Shot well, but was a PIG!
image ru image hosting 10mb limit uploading pictures screenshot software |
|
Just finished reading through 100 pages..some more than once on accident. Good info all my stuffs on its way or @ the FFL. Love the guy whos AIM firing pin broke and he had a melt down :( lol.
|
|
range report on Maten build!!
Im beside Myself with euphoria on how this stick turned out! Soft as a 5.56, gas was tuned within 4 rounds, and even at 200yrds She just didnt miss. Been wanting to do a 308 AR for more than 10 years... Let Me tell ya, It was worth the wait!!!! |
|
|
Depends on what ya like. Odd that it didnt come with one though...
Pretty much any aftermarket will work, so ambi or just standard. |
|
I think the receiver set only, comes with it. My guy took a lower from a set and hooked me up w the 2 piece upper set.
idk or he jacked me haha. last question 308 or 556 ch? does it matter? Quoted:
Depends on what ya like. Odd that it didnt come with one though... Pretty much any aftermarket will work, so ambi or just standard. View Quote |
|
My set with rail/upper came with it. Looks like yours got missed. It does use a 308 specific CH. PM me your address and I will send mine as I swapped it out with a BCM GFCH.
|
|
Quoted: I think the receiver set only, comes with it. My guy took a lower from a set and hooked me up w the 2 piece upper set. idk or he jacked me haha. last question 308 or 556 ch? does it matter? View Quote View All Quotes View All Quotes Quoted: I think the receiver set only, comes with it. My guy took a lower from a set and hooked me up w the 2 piece upper set. idk or he jacked me haha. last question 308 or 556 ch? does it matter? Quoted: Depends on what ya like. Odd that it didnt come with one though... Pretty much any aftermarket will work, so ambi or just standard. It does matter. Get the 7.62 version of the AXTS Raptor. It is worth it: https://www.axtsweapons.com/product/axts-ambidextrous-raptor-charging-handle-5-56mm/ |
|
I mean its compatible w a lot of ar15 parts so i didnt know if CH was or not :)
Thanks bud Quoted:
It does matter. Get the 7.62 version of the AXTS Raptor. It is worth it: https://www.axtsweapons.com/product/axts-ambidextrous-raptor-charging-handle-5-56mm/ View Quote View All Quotes View All Quotes Quoted:
Quoted:
I think the receiver set only, comes with it. My guy took a lower from a set and hooked me up w the 2 piece upper set. idk or he jacked me haha. last question 308 or 556 ch? does it matter? Quoted:
Depends on what ya like. Odd that it didnt come with one though... Pretty much any aftermarket will work, so ambi or just standard. It does matter. Get the 7.62 version of the AXTS Raptor. It is worth it: https://www.axtsweapons.com/product/axts-ambidextrous-raptor-charging-handle-5-56mm/ |
|
Quoted:
Just dumped this off to get cerakote. What CH works good on it? I thought it came with one and didnt order. http://i.imgur.com/rM0Xegm.jpg View Quote Call Mega. I am sure they would send you out one as it should have came with one. |
|
Cool i will.
Quoted:
Call Mega. I am sure they would send you out one as it should have came with one. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Just dumped this off to get cerakote. What CH works good on it? I thought it came with one and didnt order. http://i.imgur.com/rM0Xegm.jpg Call Mega. I am sure they would send you out one as it should have came with one. |
|
Quoted:
Cool i will. Quoted:
Quoted:
Just dumped this off to get cerakote. What CH works good on it? I thought it came with one and didnt order. http://i.imgur.com/rM0Xegm.jpg Call Mega. I am sure they would send you out one as it should have came with one. Or save yourself the time and get a BCM now seriously I could not imagine trying to grab a normal sized latch with my bushnell I'm a comfortable spot. |
|
Ordered AXTS Raptor in Nickel Boron
Plan to put a big ass scope on her lol Quoted:
Or save yourself the time and get a BCM now seriously I could not imagine trying to grab a normal sized latch with my bushnell I'm a comfortable spot. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Cool i will. Quoted:
Quoted:
Just dumped this off to get cerakote. What CH works good on it? I thought it came with one and didnt order. http://i.imgur.com/rM0Xegm.jpg Call Mega. I am sure they would send you out one as it should have came with one. Or save yourself the time and get a BCM now seriously I could not imagine trying to grab a normal sized latch with my bushnell I'm a comfortable spot. |
|
I think I've got a build list for my Form 1'd MATEN lower.
Please let me know if there's been any personal experience with these working or not. Rainer 12.5" ultra match barrel and BCG Carbine length gas tube and Seekins low profile adjustable gas block PSA MOE AR10 build kit: http://palmettostatearmory.com/psa-pa10-moe-plus-black-lower-build-kit.html I'll top it off with a 51T brake mount for my SDN-6. Still trying to find a rail that will work with the gas block and suppressor, any recommendations? Thanks Eric |
|
The only change j would make is switch to a SLR or Syrac gas block. They have locking detents so no screws to back out. Also, when you adjust, it's just one screw to turn.
As for the handguard, I would think any 11"-12" handguard would work. |
|
Quoted:
I think I've got a build list for my Form 1'd MATEN lower. Please let me know if there's been any personal experience with these working or not. Rainer 12.5" ultra match barrel and BCG Carbine length gas tube and Seekins low profile adjustable gas block PSA MOE AR10 build kit: http://palmettostatearmory.com/psa-pa10-moe-plus-black-lower-build-kit.html I'll top it off with a 51T brake mount for my SDN-6. Still trying to find a rail that will work with the gas block and suppressor, any recommendations? Thanks Eric View Quote fortis makes a 12" switch that actually measures 12.42" that might work.It will be really close if you use the deep socket style 51t mount and sdn6.I have the 14" version on mine with the seekins gas block and a 16" barrel and sdn6 its a pretty close fit overall.There aren't many options for short 308 rails so you might be forced to cut a small amount off one |
|
Quoted:
I think I've got a build list for my Form 1'd MATEN lower. Please let me know if there's been any personal experience with these working or not. Rainer 12.5" ultra match barrel and BCG Carbine length gas tube and Seekins low profile adjustable gas block PSA MOE AR10 build kit: http://palmettostatearmory.com/psa-pa10-moe-plus-black-lower-build-kit.html I'll top it off with a 51T brake mount for my SDN-6. Still trying to find a rail that will work with the gas block and suppressor, any recommendations? Thanks Eric View Quote SLR makes some great rail options for short 308s. I used one of their standard offerings for mine and I love it. I would also second their gas blocks. They are the buy once, cry once offering for adjustable gas blocks. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.