User Panel
User Panel
User Panel
|
Posted: 11/29/2012 4:00:33 PM EDT
[Last Edit: dryflash3]
Rarely does a day go by that I don't pop in my reloading room and do something. A lot of the time is due to some inspiration that I picked up on here, whether it was a subject topic or something that someone may have mentioned in their reply.
Today's reloading interest involved something Angus6 mentioned in a thread a few days ago, and that's using Hornady locking rings to switch dies back and forth on his 1050. I never used Hornady's locking rings, and in fact pretty much stayed away from locking die rings due to most of them boogering up the die threads somewhere along the line. An exception might be Dryflash's die ring mod with the lead shot. I picked up some Hornady lock rings. In short, I wish I would have done it a long time ago! Those things are great! So I spent my morning getting my .223 case prep dies out of my 650's tool head and setting up the case preparation and reloading die set up with the lock rings for the 1050. The lock rings are a lot cheaper than an additional tool head and pretty quick to change out. Maybe not quite as fast as a $200 tool head, but fast enough for the savings!  Too bad I didn't have the rings last week when I prepped close to 5 gallons of 223 for a good friend! It would have been more efficient on the 1050, instead of once through the 650 for sizing / decapping and trimming and once through the 1050 for swaging. By the way, I think Angus6 is a bad influence. He has been responsible for me spending a good chunk of change with his common sense ideas!  So, what did you do today in the world of reloading? |
|
|
|
|
Posted: 11/29/2012 4:11:41 PM EDT
[Last Edit: angus6]
[#1]
Henny I think I picked up the Hornsdy ring thing from MIA member Flamethrower , wished he'd pop back in alot of good 1050 info from him and ReefRaider to be had
Will be setting the 1050 up for .308 to deprime and swagge for a buddy later today and ordered 4k of 7.62 brass |
|
|
|
|
Posted: 11/29/2012 4:35:49 PM EDT
[#2]
Nothing. Ive got 2k 9mm 147gr plated fp's I got from RMR and instead of firing up the 550, Ive been searching and comparing all the conflicting load data I have for em...
|
|
|
|
|
Posted: 11/29/2012 4:58:45 PM EDT
[#3]
i converted 250 223 cases to 7.62x40 wt and then annealed them. also finished assembly on a tumbler.
|
|
|
|
KY, USA
|
Posted: 11/29/2012 5:26:58 PM EDT
[#4]
Only thing I did was to cut the necks off a couple hundred .223 cases to make .300 Blackout cases.
|
|
|
|
Posted: 11/29/2012 5:27:34 PM EDT
[#5]
Originally Posted By Henny:
So, what did you do today in the world of reloading? Well I found out at the range this morning that 47.5 grs of BL-C-2 driving 150 gr .308 FMJ bullets is too hot of a load for a M1A. By the way, I ordered a Super 1050 earlier this week. |
|
|
|
|
Posted: 11/29/2012 5:29:15 PM EDT
[#6]
Fired 100 9mm load from my new LNL AP and ordered 1k 124gr fmj's from RMR.
|
|
|
|
FL, USA
|
Posted: 11/29/2012 5:52:45 PM EDT
[#7]
I recieved my Brand Spanking new Rockchucker kit from UPS (35lbs)
I have dies, just gotta go get a tumbler (harbor freight) and some stainless media. |
|
|
|
Posted: 11/29/2012 6:25:38 PM EDT
[#8]
I got about 5.56 cases swaged and sorted before the wife got home yesterday, hope to do more again today.
BTW, nice powder cans. 
|
|
|
|
CA, USA
|
Posted: 11/29/2012 6:57:42 PM EDT
[#9]
Not too much today, but I did spend some time grinning while admiring some Lapua match brass that just arrived.
|
|
|
|
Posted: 11/29/2012 6:57:46 PM EDT
[#10]
Scrounged some range brass.
|
|
|
|
TN, USA
|
Posted: 11/29/2012 7:05:55 PM EDT
[#11]
I bought my first 100 large Pistol primers, and 100 45. bullets..
now im looking what kind of powder i should use.. ( want it universal if possible) dont have a press yet, but i have dies coming in soon for .45 and 25-06.. bought a scale yesterday, and thinking about getting that lee handloader kit for 42$ and slowly learn with the .45 |
|
|
|
Posted: 11/29/2012 7:23:29 PM EDT
[Last Edit: COSteve]
[#12]
Done
|
|
|
|
|
Posted: 11/29/2012 7:43:00 PM EDT
[#13]
Fondled my brand new manual! Lyman's Cast Bullet 4th Edition.
|
|
|
|
|
Posted: 11/29/2012 7:55:55 PM EDT
[#14]
Trimmed, chamfered and deburred a batch of brass for range time tomorrow. Still need to load the cases.
I also sprinkled the trace powders from a couple of 1 lb jars on the lawn, does that count? |
|
|
|
|
Posted: 11/29/2012 8:02:44 PM EDT
[#15]
Researched burn rate/weight differences between IMR5010 and WC860.
|
|
|
|
AZ, USA
|
Posted: 11/29/2012 8:08:19 PM EDT
[#16]
nothing
I have more 9mm/45acp/308 brass prepped and ready to go (atleast 2-3k each) but im trying to finish off my .223. Only problem is i have about 2k done and 8k left to PREP. even with my prep station, it gets old quick. Ive tried to do the whole watch tv and do it thing, but after 400-500 rounds, my hands are killing me. maybe I should fly my nephews in and have them do them for me.
|
|
|
AZ, USA
|
Posted: 11/29/2012 8:11:28 PM EDT
[Last Edit: azmp5]
[#17]
BAM!! double tap
|
|
|
WA, USA
|
Posted: 11/29/2012 8:30:55 PM EDT
[#18]
Originally Posted By BionicSniper:
Fired 100 9mm load from my new LNL AP and ordered 1k 124gr fmj's from RMR. How do you like it? Mine should be here sat. Whos RMR? |
|
|
VA, USA
|
Posted: 11/29/2012 8:40:31 PM EDT
[#19]
I actually loaded my most accurate load in the 30/06 to date(which shoots one hole groups with 10 shots out of my weatherby with nosler 168 grain custom comps @ a .308 velocity level.
|
|
|
|
Posted: 11/29/2012 8:41:12 PM EDT
[#20]
Just tumbled some .223 and .40 cases.
yestedday tested some loads from tuesday. tommorow size and trim about 500 .223 cases. and keep loading winters comming and i dont want to sit in the garage when its snowing out... |
|
|
|
|
Posted: 11/29/2012 8:57:01 PM EDT
[Last Edit: AssaultRifler]
[#21]
http://www.ar15.com/forums/t_6_42/384602_Saga_of_reloading_7mm_Remington_Magnum___success_issues.html
Also tumbling some 223 and 9mm cases |
|
|
|
OH, USA
|
Posted: 11/29/2012 9:22:22 PM EDT
[#22]
I'm about to load 10 cartridges of an Audette Ladder Test for my AK.
|
|
|
PA, USA
|
Posted: 11/29/2012 11:06:32 PM EDT
[#23]
Prepped 300 rounds of .223 brass. If you'd have posted this last weekend, I would have said loaded ~1525 rounds of .223.
|
|
|
ME, USA
|
Posted: 11/29/2012 11:13:14 PM EDT
[#24]
Seeing this thread made me size and trim a few .308s and throw 'em in the tumbler.
Thanks for the inspiration. |
|
|
ME, USA
|
Posted: 11/29/2012 11:15:52 PM EDT
[#25]
Originally Posted By TomCat0197:
Trimmed, chamfered and deburred a batch of brass for range time tomorrow. Still need to load the cases. I also sprinkled the trace powders from a couple of 1 lb jars on the lawn, does that count? I save all my mystery powder mixed up in a jar for a rainy day |
|
|
AL, USA
|
Posted: 11/29/2012 11:26:06 PM EDT
[#26]
melted down my last bit of range pickup lead tonight...now I just need to send it through one more cleaning cycle and turn it into ingots...
|
|
|
|
Posted: 11/30/2012 12:16:12 AM EDT
[Last Edit: dryflash3]
[#27]
 Made some 300 blk today. Cutting off necks.  Lubing before sizing.  Tumbled off the lube. Then trimmed, swaged primer crimp away, uniformed primer pockets, and annealed. Forgot to take pics. |
|
|
|
FL, USA
|
Posted: 11/30/2012 8:49:08 AM EDT
[Last Edit: salaciouscrumb]
[#28]
I converted over the 550 last night to large primer and this morning I ripped off 100 rounds of Dillon 9x25 and 100 rounds of 50 Beowulf to be used at the range this weekend.
It's fireball time!
ETA, I also loaded 100 460 Rowland for shits and giggles :) |
|
|
|
Posted: 11/30/2012 8:55:11 AM EDT
[#29]
Sized some .223 and 300 BLK.
Danny
|
|
|
|
KY, USA
|
Posted: 11/30/2012 9:57:23 AM EDT
[#30]
Well lets see,
Ive loaded about 1800 45acp on the 550B, 230gr extreams over 4.5gr tight group. sorted a 5 gal bucket of brass and ordered another 2k of extream's. all in the last 2 weeks. looking at about 150 /22-250 over H380 and a seirra 52 gr bthp. and 1000 + 115gr extream HP's 9mm over 4.8 gr tight group. those are the plan for the next two weeks. But work has been interfearing this week.
|
|
|
|
Posted: 11/30/2012 10:10:21 AM EDT
[#31]
Loaded up 10 rounds of .223 last night, trying to work up a good load for Hornady 55gr SP's. Just need some range time.
|
|
|
|
|
Posted: 11/30/2012 11:03:40 AM EDT
[#32]
Finished trimming my 1000 .223 cases and primed 200 of them
 After all of that it makes me want to invest in a giuad trimmer
|
|
|
|
|
Posted: 11/30/2012 11:24:22 AM EDT
[#33]
Originally Posted By dryflash3: http://i250.photobucket.com/albums/gg272/dryflash3/300%20Blk/PB280303.jpg Made some 300 blk today. Cutting off necks. Lubing before sizing. Tumbled off the lube. Then trimmed, swaged primer crimp away, uniformed primer pockets, and annealed. Forgot to take pics. Dryflash3, how are you doing the final trimming of your BLK brass? I like the jig you have for your bandsaw! When I get around to getting a blackout, I'll have to make a jig like that too. Delta bandsaw? From just the small portion I can see of it, it looks very similar to mine. |
|
|
|
|
Posted: 11/30/2012 7:34:18 PM EDT
[#34]
I didn't get a whole lot done in the way of reloading today. I made some empty 223 brass with my SCAR16
and I did the last of my 223 brass that needed processing. I also explained to a non reloading friend about processing 223 brass. I want to get him into reloading, and I think he's leaning that way. I then switched the 1050 back into reloading mode. It's really simple and quick with Hornady's lock rings. Once again, thanks Angus6! I had always thought about the differences in brass webs and primer pockets and the affect it has on swaging. I thought it might be easier to set up the swager if I could actually see the primer pocket while making adjustments. So I cut some of the common 223 brass that I have around. I was pretty surprised that the different manufacturers are pretty similar. At least with the brass I have, not enough to make a difference in the swaging station.  How about you? What did you do today in the world of reloading? |
|
|
|
|
Posted: 11/30/2012 8:52:56 PM EDT
[#35]
assembled a dual pid control for the lube master hope to install and test run Monday
|
|
|
|
|
Posted: 11/30/2012 9:11:40 PM EDT
[#36]
Wet tumbled 1 load of 45auto, and 2 loads of 9mm.
Created 100 used 9mm cases from my glock 19. Bought 3 new gladware containers to consolidate some of my processed brass. Still so much work to do.... but it's fun, and it keeps me off the streets.
|
|
|
|
|
Posted: 11/30/2012 9:16:01 PM EDT
[#37]
Processed several hundred 5.7x28 and several hundred 6.8 SPC. Now to load em up.
|
|
|
|
|
Posted: 11/30/2012 9:43:35 PM EDT
[#38]
I participated in the Case of Cases
|
|
|
|
|
Posted: 11/30/2012 11:20:40 PM EDT
[#39]
Originally Posted By Henny: Originally Posted By dryflash3: http://i250.photobucket.com/albums/gg272/dryflash3/300%20Blk/PB280303.jpg Made some 300 blk today. Cutting off necks. Lubing before sizing. Tumbled off the lube. Then trimmed, swaged primer crimp away, uniformed primer pockets, and annealed. Forgot to take pics. Dryflash3, how are you doing the final trimming of your BLK brass? I like the jig you have for your bandsaw! When I get around to getting a blackout, I'll have to make a jig like that too. Delta bandsaw? From just the small portion I can see of it, it looks very similar to mine. Yes Delta band saw. I'm using a 10 tooth per inch blade. Using a powered RCBS trimmer with 3 way cutter for final trim.  Today I tried out a 200 gr RN mold I plan to load in 300 blk. The other bullets are for 7.62x39. I always cast with 3 molds, alternating between all 3.
|
|
|
|
|
Posted: 12/1/2012 12:49:19 AM EDT
[Last Edit: Minuteman419]
[#40]
Got these in from Wideners.
Got everything to assemble but the energy right now. Danny
|
|
|
|
|
Posted: 12/1/2012 12:57:36 AM EDT
[#41]
Switched out the 650 from 9mm to 45ACP
Knocked out 200 rds |
|
|
|
FL, USA
|
Posted: 12/1/2012 12:59:18 AM EDT
[#42]
Primed 800+ cases. Mostly 45ACP. Loaded my first ever rounds in 9mm.
|
|
|
LA, USA
|
Posted: 12/1/2012 1:09:15 AM EDT
[#43]
Prepped about 1500 308 cases in a Dillon 650 with RT-1200.
|
|
|
|
Posted: 12/1/2012 1:18:35 AM EDT
[#44]
Though about maybe reloading and buying a RCBS starter kit.
|
|
|
|
PA, USA
|
Posted: 12/1/2012 2:01:19 AM EDT
[#45]
Busy day today:
- Made a couple hundred brass for reloading in .45 and 9mm at the range and picked up over 150 .223 cases of LC brass from the guy in the next lane. - Got home to find a Midway shipment of 2,000 hornady .224 55gr BTJHP w/c and some .308 for my 30-06. - Also in the Midway box was my new Worlds Finest Trimmer in .223, so I spent some time setting that and trimming some test brass to length. - Now waiting for the 200 .223 brass that are tumbling, and tomorrow reloading begins for Monday's trip to the outdoor range, |
|
|
|
Posted: 12/1/2012 11:31:17 PM EDT
[Last Edit: bags533]
[#46]
Decapped 1,000 rounds of LC once fired brass that I recently bought (for no known reason).
All on a single stage- my back is tired.. Oh, the added bonus is the primers pockets are crimped.
I need to pay more attention to what I buy in the future. 
|
|
|
|
|
Posted: 12/1/2012 11:39:27 PM EDT
[#47]
Tumbling, tumbling and more tumbling.
|
|
|
|
|
Posted: 12/1/2012 11:42:25 PM EDT
[#48]
Replaced my dillon powder sensor with something more practical. GOODBYE Over Charged rounds.
Thinking about redoing my bench. Move the 5 & 650 to each end, then put the other 550 in the middle. OR on the other bench with the Giraud? 
|
|
|
|
|
Posted: 12/1/2012 11:49:50 PM EDT
[#49]
 Loaded some work up loads in 300 blk with the 135 gr Sierra MK. Also did some H-110 loads. That can of powder was put away when the Lil'Gun came out. Also cast some 155 gr bullets for 7.62x39. |
|
|
|
UZB
|
Posted: 12/2/2012 12:11:19 AM EDT
[#50]
Loaded up about 200 9mm this morning. I'm working on getting 2,000 loaded up before I switch over to .45.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
