I was screwing around with one of my 10/22s tonight, putting back together some parts I just had refinished(in OD Green!) by www.azexarms.com, and I realised something. I've got a buttload of 10/22s. Like almost as many 10/22s as ARs. I've never really put much thought into it, but I really love the 10/22 rifle!!


I know some of you have large quantities of duplicate firearms also, what are some of your favorites that you can't get enough of?

Here's some more 10/22 pics:
community.webshots.com/album/27492877ZcWpzpQmQK

I think the black one in the middle is going away soon, and the camo one below it might leave too. I've got a buyer lined up, he's gathering $$$$ for both of them.

I hate getting rid of guns.

Wow Treetop!  I wish I had a 10/22 collection like that!  I really like # 2 & 3

Keep us posted on your latest additions.


Tyler

Quoted: Dibs on the second one down. The one with the para-cord wrapped looking folder and the BSA? sight and muzzle brake!

That one will hopefully never be for sale. It's the first 10/22 I ever got, I've had it over 10 years. The finish was getting pretty beat up, and some of the internals were starting to get worn after so many rounds through it. I just had it refinished in OD Green by Arizona Expert Arms, as well as having the barrel shortened to 16" and threaded for an AR flash hider.
Right now it's my favorite.

Quoted: If you want to take your 10/22 addiction to the next level go to Volquartsen web site and look at the custom 22's and 22mags. They are the best!

I'm VERY familiar with Volquartsen Custom. As far as mainstream parts go, they're definitely on the upper end of the spectrum. 3 of the rifles shown here have VC parts inside, most notably the black target rifle in the middle of the picture. It has the Volquartsen TriggerGuard 2000, VC cantilever scope mount, VC recoil buffer, VC Extractor, and also has a VC Stabilization module not shown in the pic. It's got other mods too, like a Power Custom titanium firing pin, Custom match barrel,, Harris bipod, Hogue overmolded stock, etc.
I've used Volquartsen parts on a couple of my other 10/22s that I've sold also.

Quoted: and only 500$ worth of hi cap mags, if ya wanna ditch one of those just give me a hollar...   ...does that last one have the forend of the stock trimmed? that looks bad ass.

I didn't want to clutter up the pictures even more by trying to fit all my mags and accessories in there. I've got quite a few 10/22 hi-caps now that I think about it. I'd have a hundred of them if I'd known in 1994 what I know now.
Yeah, the last one has the stock shortened. It's the stock from a future 10/22PDW project that I'll probably post pics of in a few months when I get completion of a tax stamp.
If you look closely, you can see the laser sight recessed into the front of it right below the barrel. I have another RamLine folder that it would normally sit in, but the rifle's in the short one right now since I'm waiting on a Zephyr rear sight and have no other way to aim it until the sight shows up. The barrel has been shortened to 13", with a 5" slipover flash hider permanently attached to bring it back to a legal 16+".

Quoted: What are you asking on the middle one with the bipod? What have you added on that one. Feel free to E-mail

I had it up for $800 at a recent show, and it got a lot of interest. A friend made me an offer on most of the components of it, minus the scope, bipod, etc., and he's saving up some $$$. I'm giving him a little time before listing it for sale.