User Panel
User Panel
User Panel
|
Posted: 10/11/2008 3:32:03 PM EDT
[#1]
I buy ALL C-Products, have NO problems and that includes the 6.8 mags they make. |
|
|
|
|
Posted: 10/11/2008 4:56:26 PM EDT
[#2]
I have been running CProduct 6.8 mags for about 8 months. No problems yet.
|
|
|
|
Posted: 10/11/2008 5:17:39 PM EDT
[#3]
good just ordered some. 1/2 price of pri why?
|
|
|
|
Posted: 10/11/2008 5:25:32 PM EDT
[#4]
Cproducts straight 18 round 6.8spc mags have had some issues, but replacing the follower and tweaking the lips can fix the problem. Their 5, 10, and 25 round mags work well.
|
|
|
|
Posted: 10/12/2008 2:17:41 PM EDT
[#5]
The PRI mags outclass the CProducts. If you put the two side by side it is obvious that they are built much better. That is why the PRI cost twice as much. You get what you pay for. You do not have to tweak them or send them back when you have problems. 
|
|
|
|
|
Posted: 10/12/2008 3:30:38 PM EDT
[#6]
I have seen far more problems with the PRI mags. CProducts 6.8 is a better magazine even if not factoring in price.
|
|
|
|
Posted: 10/13/2008 3:46:51 AM EDT
[#7]
The PRI mags outclass the CProducts.
If you put the two side by side it is obvious that they are built much better. That is why the PRI cost twice as much. You get what you pay for. You do not have to tweak them or send them back when you have problems. You keep believing that if you want, that is certainly your right to do so. But C Products 6.8 in every head to head test has won the contract over PRI. It's a fact, not just words! Also read Mark's [44MAG] post, he's the leading distributor for magazines. I think he pretty much has a handle on what's going on in the industry. Larry C Products |
|
|
|
Posted: 10/13/2008 8:50:00 AM EDT
[#8]
I'm not going to drop names but I have recently sold 6.8 CProducts magazines to one of the most respected AR builders in the country who was having problems with the PRI magazines in their 6.8s. Problem solved with the CProducts mags.
|
|
|
|
Posted: 10/14/2008 1:26:39 PM EDT
[#9]
I have a couple of the 17 round mags that don't work. The bolt carrier just rides over the top of the round. I changed out the grey follower to a black Magpul 6.8 follower that I robbed from a Cproducts 5 round magazine and they work perfectly. I need some more 17 round 6.8 mags but I'm hesitant to order the Cproducts version. The 5 and 10 round versions have worked flawlessly.
|
|
|
|
Posted: 10/15/2008 3:28:42 AM EDT
[#10]
I have a couple of the 17 round mags that don't work. The bolt carrier just rides over the top of the round. I changed out the grey follower to a black Magpul 6.8 follower that I robbed from a Cproducts 5 round magazine and they work perfectly. I need some more 17 round 6.8 mags but I'm hesitant to order the Cproducts version. The 5 and 10 round versions have worked flawlessly.
Sounds like you got some with the wrong follower. Just e-mail me your address and I will send you the right ones. [email protected] Larry C Products |
|
|
|
Posted: 10/16/2008 10:35:21 AM EDT
[#11]
Thanks Larry, sounds like the problem is solved. I just ordered 5 more 20's off your website. They say 20 round but I assume they only hold 17 or 18 rounds.
|
|
|
|
Posted: 10/26/2008 7:41:02 PM EDT
[#12]
Quoted: Again, thanks Larry. You're a stand up guy. No one is perfect. But perfection comes in after-purchase redemption. I think I'll order some 25rders, just in case the marxist gets bought in. Thanks, 44mag. Looking forward to another new order in a few days. Hope you have stocked up. BTW, Larry, is there a way to make my teflon 20rd 9mm mags drop free? Email me or post please. JonI have a couple of the 17 round mags that don't work. The bolt carrier just rides over the top of the round. I changed out the grey follower to a black Magpul 6.8 follower that I robbed from a Cproducts 5 round magazine and they work perfectly. I need some more 17 round 6.8 mags but I'm hesitant to order the Cproducts version. The 5 and 10 round versions have worked flawlessly. Sounds like you got some with the wrong follower. Just e-mail me your address and I will send you the right ones. [email protected] Larry C Products |
|
|
|
Posted: 10/27/2008 3:39:18 AM EDT
[#13]
BTW, Larry, is there a way to make my teflon 20rd 9mm mags drop free? Email me or post please. Jon
Yes, send them back to me and I will replace them at no charge. Larry C Products |
|
|
|
Posted: 10/27/2008 6:05:08 AM EDT
[#14]
I have 6 new c products 27 round mags that I have never used because I found rusted springs in them when i first got them and I was installing the mag pulls that i got from c products. I called left a message at C products and never heard back from them.
I might use them for target practice as targets |
|
|
|
Posted: 10/27/2008 10:12:22 AM EDT
[#15]
I have 6 new c products 27 round mags that I have never used because I found rusted springs in them when i first got them and I was installing the mag pulls that i got from c products. I called left a message at C products and never heard back from them.
I might use them for target practice as target. Every time I read a post like this, it really makes me wonder about the person posting. I have to be the most visible manufacturer on this site. My e-mail address is posted everywhere, and many have my cell and office number. 
If you want to use them as targets, that certainly is your choice. I however and I am sure many others would simply e-mail me at [email protected] or call 860 953-5007 ext 1 ask for Sara and have the problem taken care of properly. Larry C Products |
|
|
|
Posted: 10/29/2008 6:45:48 PM EDT
[#16]
I sure wish i could have talked to you when i placed my order on a 5-round 6.8 mag the ordeal i went thourgh with sara then lj . saying my card was no good then i drove to the bank twice after lj said the problem was on my end then i got the bank on the phone with sara she they had the problem. still they couldn;t preveil. so i sent a money order sara recieve it and said she sent it out 1-week went by still no mag called back again here she said it was not sent out some how well by then i was tring to keep it togather i toid her you ought to throw one in for free after all this she said no anyway finally got it after 3-weeks ask sara about it LARRY she will remeber me ROGER in florida...........
|
|
|
|
Posted: 10/29/2008 6:51:49 PM EDT
[#17]
oh by the way larry the new 5-round 6.8 mag ya sent me has a gray follower in it.......is this right??????? ROGER
|
|
|
|
Posted: 10/30/2008 2:50:42 AM EDT
[#18]
oh by the way larry the new 5-round 6.8 mag ya sent me has a gray follower in it.......is this right??????? ROGER
Yes that is correct. I apologize for all you went through. Sara is new and we just went to a new software system which stinks. The merchant company was horrible and we changed that. Where in Florida do you live? Larry |
|
|
|
Posted: 10/30/2008 6:48:54 PM EDT
[#19]
sebring; florida––––––-larry.
|
|
|
|
Posted: 10/31/2008 4:13:20 AM EDT
[#20]
sebring; florida––––––-larry.
If you are ever in Sarasota, give me a call. E-mail me and I will give you my number. [email protected]. Larry |
|
|
|
Posted: 11/22/2008 9:45:14 PM EDT
[#21]
After the understandable backorder, I finally got my 5 Cprod 6.8 mags today. They look great, Larry. Now, I'll have to get the barrel. I've tried to educate myself on the 6.8 lately, and I've read where the "high prophets" have recommended 1/11 twist, 4 groove rifling, to handle the hotter "combat" loads such as Silver State Armory is offering. I want to order from Denny's, but he doesn't state the rifling grooves. The twist is right, and he told me on the phone they have the "improved" chamber which I hear is important for this newish caliber. What are your thoughts on this, Larry? I want to pre-Osama this barrel. I think the caliber is getting a "trial" in Iraq. I'd like to know the bbl specs there and if they're using the SSA loads. Does anyone know the specs? It's hard for me to reach Denny during the day from work. BTW, Larry, is there any ETA on the replenishment on SS AR 30rd mags? Jon
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
