User Panel
Quoted:
Nice wood. What kind/where'd you get it? ED Shulen (Spelling) don't have the phone number handy |
|
Wow! Very nice man!!
I need to break down all my milsurps and do some wood refinishing. I'd like to get a Bastogne wood stock for my '42 Garand. |
|
I usually don’t like to see military rifles sporterized.
But it’s a common post war Yugoslavian rifle and not an irreplaceable war relic. And, it looks to me like you did a great job. So I’ll make an exception. Dang nice work. A deer ought to be proud to be shot by that rifle. |
|
sure is pretty!
hell, id let you shoot at me with it. just give me a head start, cause your kinda missing a scope! anyways, thats kick ass. congrats. |
|
Nice Job....I always wanted a cusom Rifle built around a 98 Action...
|
|
I cant believe you Bubbaized that wonderful old K98
I am only kidding I think it is wonderful but its coming |
|
Wow! Let me be yet another person to tell you that you did an incredible job!
|
|
Nice work. I have a project in mind myself, but considering the prices of what I want to use as host rifles(Enfield) it'll be quite a while.
|
|
|
Very nice work. Well done. Hope you succeed in your new career.
|
|
Quoted:
Great job, you going to jewel the bolt? I was going to and I still might but deadlines for getting it done are here...and next semester I will on the 1911...so maybe after I graduate I will come back and do it.... 3 to 4 hours of boring spinning |
|
Nice, what did you use to finish the wood? Tru-oil? I like the look it has. Nice looking figure in the wood also. What did you do to get that color on the bolt release? Heat? except it doesn't look like a color you would get from heat. I need to start working on mine, just need sanding and finish.
ETA: I like the shadow line, not a fan of it on my rifles but I do like how they look. Maybe i'll put one on my Montana build I'm working on, when I get access to a lathe with a stead rest again. |
|
Quoted:
Nice, what did you use to finish the wood? Tru-oil? I like the look it has. Nice looking figure in the wood also. What did you do to get that color on the bolt release? Heat? except it doesn't look like a color you would get from heat. I need to start working on mine, just need sanding and finish. true oil with a little liquid rit dye (yellow) I caustic blued the ejector box and spring together and the spring did not take a blue even after I shocked it a few times but with the color all together I thought it looked nice so I left it bad metal to get a red tinge probable just like the bottom metal it is two tone because of bad metal but yet it looks good with the wood |
|
I only wish you were as good at taking pictures as you are at building rifles....
Gunsmithing school is something I'd really love to do... |
|
|
Quoted:
I only wish you were as good at taking pictures as you are at building rifles.... well I had to go to school for the rifle ability so I guess a photography class is in order |
|
Cool! Can't even see the Dremel marks!
Looks great, especially the case hardened look. The mounts could use some work....looking at cheap factory deburred-by-tumbling mounts next to that level of worksmanship is, well, underwhelming. |
|
Quoted:
Cool! Can't even see the Dremel marks! Looks great, especially the case hardened look. The mounts could use some work....looking at cheap factory deburred-by-tumbling mounts next to that level of worksmanship is, well, underwhelming. the dremmel was for other things not this gun.....well I have not had time to make my own bases yet...I might next semester.....but for the grade they are a requirement to be installed.... |
|
Quoted:
Nice. Bust out the checkering tools. Here are some of my old stockmaking tools from gunsmithing school some 17 years ago. http://img.photobucket.com/albums/v455/innocent_bystander/stocktools-1.jpg http://img.photobucket.com/albums/v455/innocent_bystander/stocktools-2.jpg http://img.photobucket.com/albums/v455/innocent_bystander/stocktools-3.jpg my checkering work needs just that a lot of work....so i do not know if I will ever checker this rifle maybe one of my later stocks..... |
|
very nice job indeed, the color case hardening turned out exceptionally well
i am jealous |
|
|
Quoted:
Quoted:
Quoted:
Nice, what did you use to finish the wood? Tru-oil? I like the look it has. Nice looking figure in the wood also. What did you do to get that color on the bolt release? Heat? except it doesn't look like a color you would get from heat. I need to start working on mine, just need sanding and finish. true oil with a little liquid rit dye (yellow) I caustic blued the ejector box and spring together and the spring did not take a blue even after I shocked it a few times but with the color all together I thought it looked nice so I left it bad metal to get a red tinge probable just like the bottom metal it is two tone because of bad metal but yet it looks good with the wood I knew it was tru-oil, I am good I was thinking it was just the different type of metal reacting to the bluing process differently. You never can tell what color something will turn. We even had a couple parts come out with a slight green in it. Turns out people ruined the tank my using welding rod to hang parts and the coating on the welding rod effected the tank. I also got a color similar to that by dipping a cast reciever into the tank for 5-10 seconds at a time then shock in the rinse water. Did that a could times and it came out nice, after coloring it with the torch. http://i8.photobucket.com/albums/a32/magurgle/arfcom/stockmaking/CIMG1230.jpg I like that metal color...... Quoted:
Good work Burn i went To TSJC when Ed Shulen was the stockmarking instructor. He had a fit when I took a die grinder with a big round burr to one of my stocks that I made by hand (in his class to )glass bed it for another class. dremmels and grinders makes one of our instructors cringe... |
|
It turned out very sharp looking. You definitely have some talent.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.