User Panel
User Panel
User Panel
|
Posted: 5/28/2015 5:25:08 PM EDT
[#1]
Rich, mine is that high or higher, I replaced with a 12x20' deck and we used 4 6x6s
|
|
|
|
Posted: 5/28/2015 5:54:19 PM EDT
[#2]
Use 6 X 6 pressure treated or cedar set on a poured pier, not in the ground or in concrete or you will be doing it again in a few years.
|
|
|
|
Posted: 5/28/2015 6:05:20 PM EDT
[#3]
I was thinking 4x6, but it sounds like 6x6 is the better choice.
Now I gotta find a way to pull the old footings out, since they are below ground. Thanks for the input. It looks like a deck demolition day is in the near future. Any recommendations on a contractor to rebuild it? Rich |
|
|
|
Posted: 5/28/2015 6:47:06 PM EDT
[#4]
Give the boys an 8lb sledge and let them at the old footings. When we did mine we poured 24" cube footings for each 6x and then a 6" tall stand for each beam to keep them way off the ground. It was my slow season when we rebuilt ours so I hired a handyman deck guy and paid him hourly to be his "bitch." This gave me a foreman, saved me money, allowed me to learn some skills, and using his discount at his supplier almost paid for his entire salary vs the cost I would have paid for the material at HD.
|
|
|
|
Posted: 5/28/2015 8:10:28 PM EDT
[#5]
Go with 6x6 . And use bolts to tie the deck together. Nails just won't last . And they pull apart.
What ever you do don't use 4x4 posts . Many new homes here in Columbia county have decks built with 4x4 s and they are scary as hell .And many feet higher than your 13 ft. I won't even step out on them . gd |
|
|
|
Posted: 5/28/2015 8:43:16 PM EDT
[#6]
6x6 is code minimum now
Google ga deck construction details & a booklet should pop up telling you everything you need to know about the new codes If the footing is only a couple of inches below ground you could probably install an adjustable post base using anchoring cement inside the cutoff metal post |
|
|
|
Posted: 5/28/2015 9:46:18 PM EDT
[#7]
Quote HistoryQuoted:
Any recommendations on a contractor to rebuild it? Rich Handydave |
|
|
|
Posted: 5/28/2015 10:39:46 PM EDT
[#8]
Quote HistoryQuoted:
I was thinking 4x6, but it sounds like 6x6 is the better choice. Now I gotta find a way to pull the old footings out, since they are below ground. Thanks for the input. It looks like a deck demolition day is in the near future. Any recommendations on a contractor to rebuild it? Rich Drill a hole in the existing post big enough to put a 1/2 or 3/4 bolt or piece of rebar through. Use a high lift Jack against the rod to lift it out. You can use any Jack really, you just will need a stout piece of wood to make up the difference as the post is raised. Or a shit load of tannerite. Your call. ETA; JWS contracting did my parents deck. Jason is the owner and is a solid dude and Iraq vet if it matters to you. Posted Via AR15.Com Mobile |
|
|
|
Posted: 5/29/2015 4:51:21 PM EDT
[#9]
Quote HistoryQuoted: Handydave Quote HistoryQuoted: Quoted: Any recommendations on a contractor to rebuild it? Rich Handydave My understanding is that Handydave mainly works on larger projects or commercial work, but he did refer me to a guy who did excellent work installing some attic stairs for me and I'll be using him for other jobs as funds become available. That guy is Warren Williams, www.warrenwilliamsremodeling.com |
|
|
|
Posted: 5/29/2015 8:24:10 PM EDT
[#10]
Quote HistoryQuoted:
My understanding is that Handydave mainly works on larger projects or commercial work, but he did refer me to a guy who did excellent work installing some attic stairs for me and I'll be using him for other jobs as funds become available. That guy is Warren Williams, www.warrenwilliamsremodeling.com Quote HistoryQuoted:
Quoted:
Quoted:
Any recommendations on a contractor to rebuild it? Rich Handydave My understanding is that Handydave mainly works on larger projects or commercial work, but he did refer me to a guy who did excellent work installing some attic stairs for me and I'll be using him for other jobs as funds become available. That guy is Warren Williams, www.warrenwilliamsremodeling.com Warren is a great contractor that I've known for 20 years As of January 1 I no longer do any residential work regardless of size & only do commercial buildout I'm always happy to refer qualified contractors to my fellow arfcommers & give advice |
|
|
|
Posted: 5/31/2015 10:03:03 AM EDT
[#11]
OP,
Careful soliciting the advice of engineers; they'll have you cantilevering it. 
|
|
|
|
Posted: 6/4/2015 7:39:30 PM EDT
[#12]
Check out http://go.warren-contracting.com/
They do all types of residential from deck to building houses. |
|
|
|
Posted: 6/4/2015 8:05:35 PM EDT
[#13]
Thanks guys for all the recommendations, and advice.
After the first estimate, I have to wonder, What is the going rate per square foot? The first estimate was, I think, WAY out of line. Rich |
|
|
|
Posted: 6/5/2015 7:12:32 AM EDT
[#14]
Quote HistoryQuoted:
Thanks guys for all the recommendations, and advice. After the first estimate, I have to wonder, What is the going rate per square foot? The first estimate was, I think, WAY out of line. Rich Do you have an idea of the material cost? I typically see labor equal to cost of material for decks. Total job cost is 2 x material cost. |
|
|
|
Posted: 6/5/2015 6:00:48 PM EDT
[#15]
Yes, i have priced out the materials. Retail "Big Box" is $1600.
So you are saying $3200? That is half of the first quote. Rich |
|
|
|
Posted: 6/5/2015 6:15:53 PM EDT
[#16]
Quote HistoryQuoted: Yes, i have priced out the materials. Retail "Big Box" is $1600. So you are saying $3200? That is half of the first quote. Rich |
|
|
|
Posted: 6/5/2015 7:30:42 PM EDT
[#17]
Quote HistoryQuoted:
Is this a ground level deck or do you need a skyhook to reach it? Quote HistoryQuoted:
Quoted:
Yes, i have priced out the materials. Retail "Big Box" is $1600. So you are saying $3200? That is half of the first quote. Rich Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost |
|
|
|
Posted: 6/5/2015 7:44:53 PM EDT
[#18]
Quote HistoryQuoted: Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost Quote HistoryQuoted: Quoted: Quoted: Yes, i have priced out the materials. Retail "Big Box" is $1600. So you are saying $3200? That is half of the first quote. Rich Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost |
|
|
|
Posted: 6/5/2015 9:59:06 PM EDT
[#19]
Quote HistoryQuoted:
Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost Quote HistoryQuoted:
Quoted:
Quoted:
Yes, i have priced out the materials. Retail "Big Box" is $1600. So you are saying $3200? That is half of the first quote. Rich Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost I understand code changes, but to re skin 250 sqft @ $7000, really? Rich |
|
|
|
Posted: 6/5/2015 10:40:01 PM EDT
[#20]
Quote HistoryQuoted:
I understand code changes, but to re skin 250 sqft @ $7000, really? Rich Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Yes, i have priced out the materials. Retail "Big Box" is $1600. So you are saying $3200? That is half of the first quote. Rich Op says 13 feet off ground There are a ton of code changes added jan 1, 2014 that drive up cost I understand code changes, but to re skin 250 sqft @ $7000, really? Rich It's hard to say without looking at your particular house & what you want. 13' off the ground definitely moves the price up due to significantly decreased productivity vs ground level & there is a skilled labor shortage which is driving prices up on top of the code changes. |
|
|
|
Posted: 6/9/2015 10:54:23 AM EDT
[#21]
Code varies county by county. Cherokee says that concrete piers should use "simpson post ties" to marry the post to the concrete. You might set new piers to get the deck up and then go back and demo the old ones after I would think.
Take anything i say with a grain of salt because I almost caused Jeff to have no babies (fall onto a joist). I think it was the same deck project where Kevin climbed into a tub and then toppled 6 feet over the edge when he was about 3 or 4 years old. Everything I've built since then has been closer to the ground. 
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
