Site Notices
  Previous Page
Page:  / 2
Author
Message
dennysguns
Offline
Posts: 19340
Feedback: 0% (0)
Posted: 3/21/2008 7:09:34 PM EST
[Last Edit: 8/6/2009 11:18:39 AM EST by dennysguns]

NOW WITH SPEC II CHAMBERS


BOTH NOW OUT OF STOCK

[div style='text-align: center;']</center id=center>
[div style='text-align: center;']DENNYS GUNS/GLS,LLC</center id=center>
The GTS/Dennys Guns Recon profile 6.8 barrels and bolts arrived today from White Oak Armament.

LINK TO 6.8 TESTS

[div style='text-align: center;']SPECS ON THE 16" RECON:</center id=center>

LENGTH: 16.1"
MATERIAL: 416 GRADE 70 STAINLESS
WEIGHT: 1LB 14 OZ
GAS SYSTEM: MIDLENGTH
RATE OF TWIST: 1:11
BARREL EXT. M4 CUT BARREL EXTENSION
CHAMBER: 6.8 SPC
THREADS: 5/8"X 24 TPI
RIFLING: STANDARD CUT RIFLING
OPTIONS: MATTE BEADED FINISH N/C
ADD'L OPTIONS:BLACK ION BOND $50


Each barrel with ship with a 6.8 bolt.

[div style='text-align: center;']SPECS ON THE 12" RECON:</center id=center>

LENGTH: 12"
MATERIAL: 416 GRADE 70 STAINLESS
WEIGHT: 1LB 7 OZ
GAS SYSTEM: CARBINE
RATE OF TWIST: 1:11
BARREL EXT. M4 CUT BARREL EXTENSION
CHAMBER: 6.8 SPC
THREADS: 5/8"X 24 TPI
RIFLING: STANDARD CUT RIFLING
OPTIONS: MATTE BEADED FINISH N/C
ADD'L OPTIONS:BLACK ION BOND $50


[span style='font-weight: bold;'] Each barrel with ship with a 6.8 bolt.


I DID HAVE JOHN AT WHITE OAK INCREASE THE DIAMETER OF THE BARREL PROPORTIONAL TO THE INCREASE IN BORE DIAMETER TO KEEP THE WALL THICKNESS OF THE BARREL THE SAME AS THE ORIGINAL 5.56MM RECON, IT ALSO KEEPS THE WEIGHT THE SAME ALSO. SO IF YOU HAVE A 5.56MM RECON AND BUILD A SECOND 6.8 RECON THEY WILL HANDLE EXACTLY THE SAME IF YOU BUILD THEM IDENTICALLY.

OTHER OPTIONS AVAILABLE: WE CAN SELL JUST THE BARREL AND BOLT OR ANY GAS BLOCKS, GAS TUBE, RAILS, UPPER OR A COMPLETE CUSTOM BUILD.

THESE ARE NOW ON THE WEBSITE.

The price for a 16" OR 12" RECON SPC 6.8 Barrel with 6.8 bolt will be $355 delivered.

HERE ARE THE PICS OF THE 6.8 BARRELS AND A BUILD I DID TONITE

THE 6.8 SPC RECON BARREL 16 INCH


THE 12.5 INCH RECON IN BLACK ION BOND


CLOSE UP OF THE 6.8 BARREL MARKING


RANGE REPORT AND TEST TARGET PICS. AMMO USED WAS HORNADAY 110 VMAX AND REMINGTON 110 GRAIN LOAD, BOTH FACTORY

GETTING HER SIGHTED AT 100 YDS. 25 YARD ZERO WAS FIRST. SHOT HIGH AT 100 CORRECTED, TOO LOW, AND THEN RIGHT ON WITH SECOND SHOT TO CONFIRM ZERO


FIVE SHOTS AT 100 YARDS WITH HORNADAY V-MAX 110 LOAD


3 SHOTS WITH REMINGTON 110 GRAIN FACTORY LOAD, 3 SHOTS BECAUSE I WAS FREEZING BY THEN, TARGET IS MIS-LABELED HORNADAY. THIS IS THE REMINGTON LOAD.


The rifle worked just fine and no malfuctions with any of the ammo. Brass was ejected well. I used the rifle pictured above with the MK4 1.5X5 Leupold scope.

VIEW 1 OF ASSEMBLED RIFLE


VIEW 2 OF ASSEMBLED RIFLE


12 INCH RECON 6.8 SPC IS ALSO AVAILABLE. I DIDN'T HAVE TIME YET TO PHOTO THE BARREL BUT HERE ARE PICS OF MY 12 INCH AND SOME GROUPS IT SHOT

This makes a very handy length carbine with a lot more punch than 5.56. The barrel length is 12 inches and the Noveske KX3 makes it very pleasant to shoot.

RIGHT SIDE OF THE RIFLE



LEFT SIDE OF THE RIFLE



paulsantos beautiful build



DETAILS
LENGTH OVER ALL STOCK CLOSED: 29 3/4"
LENGTH OVER ALL STOCK EXTENDED: 33 5/8"
HEIGHT FROM TOP OF EOTECH TO BOTTOM OF MAG: 11 1/2"
BARREL CONTOUR: MEDIUM
WEIGHT AS SHOWN WITH EOTECH, UNLOADED: 8.3 LBS

12 of these barrels are in stock. I like the size and balance so I have ordersed a dozen more barrels just like it. The barrel material is 416 stainless. Just like the 6.8 SPC RECONS the rate of twist is 1:11. Barrel length is 12.0".

RANGE REPORT

I tested the 12 inch Recon 6.8 SPC today.
I roughly zeroed a 2.5X10 NIGHTFORCE on a LaRue mount to check accuracy at 100 yards. The zero was rough as this is not this rifles primary optic, the EoTech is.

Five shots at 100 yards with the Nightforce



Five shots at 100 yards with the Eotech.



Conditions were gusty winds and intermittent clouds.
Ammo was Remington factory 117 Grain.
Magazines were PRI 15 rounders.

The rifle functioned 100 percent with no failures of any kind. I fired around 250 rounds.

The KX3 did wonders for the back blast and this range is a good test as you are shooting in a concrete and plywood box. I was also shooting in a customers 14.5 witha Phantom and couldn't feel any more blast from the 12 inch 6.8 SPC than I did from the 14.5 5.56.

Thanks for checking these out
Denny

LINK TO 6.8 SPC BARRELS ON THE WEBSITE

HOW TO ORDER:
1. Go to my website and order with Visa, MasterCard, AMEX, Discover. Web Address is www.globaltactical.com
2. Send Personal Check or Money Order to:
GTS,LLC
Dept. AR15.com
2001 Clay Street
North Kansas City, MO 64116
3. Call me from 9 to 5 CST 816 809 9452 9AM TO 6PM MON-FRIDAY

Thanks,
Denny
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 19445
Feedback: 0% (0)
Link To This Post
Posted: 3/27/2008 5:01:45 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 19609
Feedback: 0% (0)
Link To This Post
Posted: 4/7/2008 8:03:07 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 19734
Feedback: 0% (0)
Link To This Post
Posted: 4/16/2008 7:03:29 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 19797
Feedback: 0% (0)
Link To This Post
Posted: 4/22/2008 3:34:10 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 19941
Feedback: 0% (0)
Link To This Post
Posted: 5/2/2008 5:07:01 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20010
Feedback: 0% (0)
Link To This Post
Posted: 5/7/2008 2:46:20 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
moose-hunter
Offline
Posts: 179
Feedback: 100% (70)
Link To This Post
Posted: 5/12/2008 8:52:59 AM EST
Sorry Denny, I'm unable to speak with you via the telephone at this time (medical condition) I had to send you an email. i'm very interested in the 12" 6.8 barrel for my SBR project! Hope you have this in stock...
dennysguns
Offline
Posts: 20235
Feedback: 0% (0)
Link To This Post
Posted: 5/30/2008 3:33:39 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20308
Feedback: 0% (0)
Link To This Post
Posted: 6/4/2008 4:40:52 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20348
Feedback: 0% (0)
Link To This Post
Posted: 6/7/2008 9:23:22 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20384
Feedback: 0% (0)
Link To This Post
Posted: 6/9/2008 4:12:42 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20585
Feedback: 0% (0)
Link To This Post
Posted: 6/29/2008 7:22:36 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 20636
Feedback: 0% (0)
Link To This Post
Posted: 7/7/2008 1:07:23 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
TTUGOOB
Team Member
Offline
Posts: 125
Feedback: 100% (75)
Link To This Post
Posted: 7/15/2008 2:19:02 PM EST
[Last Edit: 7/15/2008 2:22:24 PM EST by TTUGOOB]
Is it .750 diameter at the gasblock and is the barrel dimpled already for set screws.
dennysguns
Offline
Posts: 20725
Feedback: 0% (0)
Link To This Post
Posted: 7/15/2008 3:07:30 PM EST

Originally Posted By TTUGOOB:
Is it .750 diameter at the gasblock and is the barrel dimpled already for set screws.


Yes and yes
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
TTUGOOB
Team Member
Offline
Posts: 126
Feedback: 100% (75)
Link To This Post
Posted: 7/16/2008 7:43:48 AM EST
Cool, Money on the way for a 16.1. You da man.
dennysguns
Offline
Posts: 20869
Feedback: 0% (0)
Link To This Post
Posted: 7/25/2008 2:49:54 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21010
Feedback: 0% (0)
Link To This Post
Posted: 8/4/2008 11:05:04 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21213
Feedback: 0% (0)
Link To This Post
Posted: 8/15/2008 4:26:58 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21326
Feedback: 0% (0)
Link To This Post
Posted: 8/23/2008 6:42:33 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21405
Feedback: 0% (0)
Link To This Post
Posted: 8/27/2008 6:55:36 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21447
Feedback: 0% (0)
Link To This Post
Posted: 8/31/2008 4:04:12 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
Derek45
Diligentia, Vis, Celeritas
Online
Posts: 4024
Feedback: 100% (9)
Link To This Post
Posted: 9/1/2008 4:14:23 PM EST
Denny,

Can these barrels shoot the hotter "Combat Loads"?

Thanks
NRA Life Member
USPSA-IPSC


"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."

- Benjamin Franklin
dennysguns
Offline
Posts: 21481
Feedback: 0% (0)
Link To This Post
Posted: 9/3/2008 4:24:58 AM EST

Originally Posted By Derek45:
Denny,

Can these barrels shoot the hotter "Combat Loads"?

Thanks


Yes. I have shot them in mine and a soon to be released independent test here in the 6.8 forum and and on 6.8 Forums will also bear this out.
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
Tac2cal
Member
Offline
Posts: 880
Feedback: 100% (325)
Link To This Post
Posted: 9/3/2008 5:49:46 AM EST
What is the price of the Ion bond option on the 16" Recon? Here it says $50, on your site it says $65. Thanks!
Everything good that I've gotten has come from the EE!!
dennysguns
Offline
Posts: 21492
Feedback: 0% (0)
Link To This Post
Posted: 9/3/2008 4:10:46 PM EST

Originally Posted By Tac2cal:
What is the price of the Ion bond option on the 16" Recon? Here it says $50, on your site it says $65. Thanks!


$50. I was gonna go $65 but decided to give a break
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21597
Feedback: 0% (0)
Link To This Post
Posted: 9/12/2008 5:04:23 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21666
Feedback: 0% (0)
Link To This Post
Posted: 9/19/2008 5:21:46 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21667
Feedback: 0% (0)
Link To This Post
Posted: 9/19/2008 5:24:59 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21784
Feedback: 0% (0)
Link To This Post
Posted: 9/26/2008 7:13:36 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21838
Feedback: 0% (0)
Link To This Post
Posted: 10/1/2008 4:04:59 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 21964
Feedback: 0% (0)
Link To This Post
Posted: 10/10/2008 6:23:07 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
brad3
Offline
Posts: 6
Feedback: 100% (2)
Link To This Post
Posted: 10/12/2008 2:45:58 PM EST
Whats the overall length of the barrel with the noveske/comp installed to the bolt face,,,could a barrel be done a bit longer if needed to make the minimum length of 16" with the noveske on? It would be worth a small tack weld.....

Thank you Brad
dennysguns
Offline
Posts: 22005
Feedback: 0% (0)
Link To This Post
Posted: 10/15/2008 5:13:46 AM EST
[Last Edit: 10/15/2008 5:15:00 AM EST by dennysguns]

Originally Posted By brad3:
Whats the overall length of the barrel with the noveske/comp installed to the bolt face,,,could a barrel be done a bit longer if needed to make the minimum length of 16" with the noveske on? It would be worth a small tack weld.....

Thank you Brad


The 12.5 with a Noveske comp attached would only make 14.95". I do not know where to get the extra Inch.

The best option would be to cut down a 16" to 13.7" Custom work, call for quote. 816 809 9452

D.
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 22113
Feedback: 0% (0)
Link To This Post
Posted: 10/23/2008 6:52:45 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
rusteerooster
Team Member
Offline
Posts: 2627
Feedback: 100% (112)
Link To This Post
Posted: 10/23/2008 2:03:57 PM EST
Denny, what you won't accept IM's and the e mail thru the site is disabled.
dennysguns
Offline
Posts: 22116
Feedback: 0% (0)
Link To This Post
Posted: 10/24/2008 10:14:51 PM EST

Originally Posted By rusteerooster:
Denny, what you won't accept IM's and the e mail thru the site is disabled.


Nope, too busy for both. Give me a call instead. I would much rather to talk to my customers. 816 809 9452
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 22139
Feedback: 0% (0)
Link To This Post
Posted: 10/25/2008 8:46:59 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
SHIVAN
Member
Offline
Posts: 28316
Feedback: 100% (148)
Link To This Post
Posted: 10/29/2008 7:26:19 AM EST
Denny: Will your 12.5" Recon barrel handle the SSA combat loads?
"Courage is not the absence of fear, but rather the judgment that something else is more important than one's fear. The timid presume it is lack of fear that allows the brave to act when the timid do not."
dennysguns
Offline
Posts: 22169
Feedback: 0% (0)
Link To This Post
Posted: 10/30/2008 7:36:37 AM EST
Originally Posted By SHIVAN:
Denny: Will your 12.5" Recon barrel handle the SSA combat loads?


Independent tests shows it will.
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 22183
Feedback: 0% (0)
Link To This Post
Posted: 10/30/2008 5:29:55 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
m411b
Offline
Posts: 87
Feedback: 92% (13)
Link To This Post
Posted: 11/3/2008 4:16:13 AM EST
At this time I do not have access to a phone to be able to call for pricing. I am wondering if you can quote me a price via PM for a complete 16" upper?
dennysguns
Offline
Posts: 22222
Feedback: 0% (0)
Link To This Post
Posted: 11/3/2008 4:16:34 PM EST
Originally Posted By m411b:
At this time I do not have access to a phone to be able to call for pricing. I am wondering if you can quote me a price via PM for a complete 16" upper?




Sorry pmS ARE OFF JUST POST IN THIS THREAD
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
EODBrownGuy
Offline
Posts: 20
Feedback: 100% (19)
Link To This Post
Posted: 11/3/2008 4:34:34 PM EST
what would a complete 16" upper in carbine length run.
m411b
Offline
Posts: 89
Feedback: 92% (13)
Link To This Post
Posted: 11/3/2008 4:45:18 PM EST
[Last Edit: 11/3/2008 4:48:26 PM EST by m411b]


How much for an upper like this one?
Just the complete upper without sites. 6.8 of course!
dennysguns
Offline
Posts: 22242
Feedback: 0% (0)
Link To This Post
Posted: 11/7/2008 3:45:27 AM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
dennysguns
Offline
Posts: 22469
Feedback: 0% (0)
Link To This Post
Posted: 12/3/2008 7:08:13 PM EST
Dennys Guns/GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Cell: 816 809 9452
Fax: 816 221 1171
[URL]www.global-tactical.com[/URL]
Khadre
Team Member
Offline
Posts: 1026
Feedback: 100% (175)
Link To This Post
Posted: 12/4/2008 6:39:53 PM EST
[Last Edit: 12/4/2008 6:43:22 PM EST by Khadre]
Denny, what's the # of rifling grooves = 4- or 6-groove? thnx.

Are the barrel extension on the 6.8spc barrels, m4 extended-ramp?

I don't see the 16" barrel listed (only see 12" and 18") on your site?

Also, any Larue Stealth upper w/ m4 feedramps, in stock?
brykelly
Offline
Posts: 609
Feedback: 100% (38)
Link To This Post
Posted: 12/5/2008 6:11:23 PM EST
The web site shows that youre out of 16" 6.8 barrels, is that correct?
riflmn
Member
Offline
Posts: 178
Feedback: 100% (75)
Link To This Post
Posted: 12/10/2008 5:32:54 AM EST
Email sent to purchase a 16" 6.8
Thanks.
  Previous Page
Page:  / 2