Site Notices
10/30/2014 3:55:04 PM
Author
Message
2cut2
Offline
Posts: 40
Feedback: 100% (44)
Posted: 7/1/2012 2:05:06 PM
This is a NEW tricked out upper with a WMD Nickel Boron upper receiver. A Spikes Melonite coated gas tube and YHM Diamond free float forearm with end cap. The barrel is a Spikes Tactical Cold Hammer Forged 16 Mid-Length 5.56 chamber. These Amazing CHF barrels are extremely durable with a 20,000+ round service life. These CHF barrels are turned to ST's New Optimum barrel Profile. This New profile is lighter than government profile but beefier than a lightweight profile, it's an "Optimum" profile. It weighs 26.4oz with M4 Barrel extension and no FSB on the 16" Barrel. The barrels have a .750" gas block seat with a properly sized gas port and the muzzle is threaded perfectly concentric to the Bore with 1/2x28 threads. These CHF barrels are made to the Mil-Spec for the M249 SAW. The Cold Hammer Forging process Work Hardens the steel around a rifled mandrel, which creates the lands and grooves. These barrels are chambered in 5.56 NATO, with a 1/7 Twist Rate. The barrel blanks are the correct Certified CMV material and they are also Hard Chrome lined to the M249 SAW Mil-Spec, which is almost twice as thick as the Hard Chrome on a Mil-Spec M4. The End Result is a Rifle that can be Run Hard Day after Day! Each barrel is HPT and MPI. Just add you BCG and muzzle device and your ready to ROLL! Paypal discreet (personal) route or add 3% or USPS Money order. Shipping includes full insurance. $525 delivered....

http://i1136.photobucket.com/albums/n485/2cut2/pix136787267.jpg

http://i1136.photobucket.com/albums/n485/2cut2/pix467888831.jpg

http://i1136.photobucket.com/albums/n485/2cut2/pix023113035.jpg
nrfosnaugh
Offline
Posts: 13
Feedback: 100% (6)
Link To This Post
Posted: 7/1/2012 11:23:36 PM
Where are you at in Texas and what part of the upper in NiB plated?
2cut2
Offline
Posts: 41
Feedback: 100% (44)
Link To This Post
Posted: 7/2/2012 12:32:32 AM
[Last Edit: 7/2/2012 3:08:41 PM by Gatorhunt]
Outside of Houston....The entire upper receiver was done in NiB then a black top coat was applied on the exterior leaving exposed NiB on the inside of the receiver. Look closely at the last picture in the thread.


Back to top violation, please read the rules.
nrfosnaugh
Offline
Posts: 15
Feedback: 100% (6)
Link To This Post
Posted: 7/2/2012 1:40:56 PM
IM sent
SYSTEM
Posted: 7/2/2012 3:08:50 PM
[Last Edit: 7/2/2012 3:08:50 PM by Gatorhunt]
Back to top violation-please read EE rules 15, 16 and 17-DO NOT REPOST THIS AD-Contact a Mod in 72hrs for unlock.