Site Notices
  Previous Page
Page:  / 8
Author
Message
dennysguns
Offline
Posts: 4299
Feedback: 0% (0)
Posted: 6/2/2005 12:52:45 AM
[Last Edit: 4/20/2009 5:13:10 PM by dennysguns]

DENNYS GUNS/GLOBAL TACTICAL SUPPLY

AR15/M16 GENERATION 2 High Tech Non-Rotational Hammer/Trigger Pins with Retainers


GEN 1 PINS ARE ALSO IN STOCK. .154 (STANDARD SIZE ONLY ARE IN STOCK TOO !!!



This is the hottest setup we have seen for hammer/trigger pins. These pins are made of stainless steel with holes for lube. The trigger pin is threaded on each side for the retention cap screc. The hammer pin is slotted to receive the tabs on the ends of the hammer pin. This new design allows the hammer pin to be solid and reduce the possibility of breaking, even in 9mm SMGs.

These are available in two diameters, .154” for standard use and .1555” for a tighter fit or receivers with wear in the pin holes.

Once the pins are in place in the receiver you simply place the slot over the hammer pin and rotate the retainer until it lines up with the threaded hole in the trigger pin. Install the cap screw into the trigger pin, the other side will be properly aligned and just put in the other screw. Tighten firmly but don't over do it. Installation on the Gen 2 is faster and easier than on the Gen 1 model.

Once installed your hammer/trigger pins will no longer rotate and cause un-necessary receiver wear and the pins also cannot “walk out” to due weak hammer or trigger springs.

The little bullet shaped object in the picture is the EZ install tool and is screwed into the threaded end of the pins. Due to the taper on the EZ tool pin alignment is a snap. All necessary tools come with the kit.


I have used these pins on the lower pictured with our LMT 2 Stage Match Triggers and they fit perfectly and there is no wobble in either the hammer or the trigger.



DIRECT LINK TO THIS PRODUCTglobaltactical.com/axami/shop.php?grd=117

I recommend these very, very highly. They eliminate receiver wear, have superior ability to hold lube, stainless steel and are anti-walk.

Retail price is $32.00 a pair, GTS price is $29.95 Standard Pins or Oversize.


ORDERS $300 AND UP SHIP FREE USPS PRIORITY MAIL

HOW TO ORDER:
1. Go to my website and order with Visa, MasterCard, AMEX, Discover. Web Address is www.globaltactical.com
2. Send Personal Check or Money Order to:
GTS,LLC
Dept. AR15.com
2001 Clay Street
North Kansas City, MO 64116
3. Call me from 9 to 5 CST 816 809 9452 9AM TO 6PM MON-FRIDAY

Thanks,
Denny

"Firearms stand next in importance to the Constitution itself. They are the people's liberty teeth keystone... the rifle and the pistol are equally indispensable... more than 99% of them by their silence indicate that they are in safe and sane hands. The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. " –– President George Washington in his 1st address to Congress
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4496
Feedback: 0% (0)
Link To This Post
Posted: 6/20/2005 9:25:40 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4522
Feedback: 0% (0)
Link To This Post
Posted: 6/22/2005 8:33:59 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4639
Feedback: 0% (0)
Link To This Post
Posted: 7/3/2005 11:39:02 PM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4655
Feedback: 0% (0)
Link To This Post
Posted: 7/4/2005 12:09:54 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4711
Feedback: 0% (0)
Link To This Post
Posted: 7/7/2005 7:34:12 PM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
9divdoc
Team Member
Online
Posts: 5558
Feedback: 100% (88)
Link To This Post
Posted: 7/11/2005 8:05:41 PM
I gotta question...

If a person buys two Magpull trigger guards and the shipping is free
can you throw 2 KNS Pin sets in the same package as the trigger guards

And yep basically I am a tightwad, cheapskate etc.

:)
The Separation of Church & State
Will Likely Lead to One Hell of a State
dennysguns
Offline
Posts: 4787
Feedback: 0% (0)
Link To This Post
Posted: 7/12/2005 7:34:02 AM
[Last Edit: 7/12/2005 7:36:27 AM by dennysguns]

Originally Posted By 9divdoc:
I gotta question...

If a person buys two Magpull trigger guards and the shipping is free
can you throw 2 KNS Pin sets in the same package as the trigger guards

And yep basically I am a tightwad, cheapskate etc.

:)



It has to do with the way the shopping cart works. I am not opposed to discounting the shipping but to do so I have to manually do the credit card charges, which is quite a bit of time so it costs me two ways, both the shipping and the time to do the charges like a special order.

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
9divdoc
Team Member
Online
Posts: 5560
Feedback: 100% (88)
Link To This Post
Posted: 7/12/2005 12:09:45 PM
I was just hoping since the Magpull trigger guards were heading this way anyway
the KNS pins could hitch a ride with 'em ... :)
The Separation of Church & State
Will Likely Lead to One Hell of a State
dennysguns
Offline
Posts: 4830
Feedback: 0% (0)
Link To This Post
Posted: 7/15/2005 6:46:07 AM

Originally Posted By 9divdoc:
I was just hoping since the Magpull trigger guards were heading this way anyway
the KNS pins could hitch a ride with 'em ... :)



I am pretty sure Mikie got the orders combined and shipped together. Most likely they will show up at your place today.

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4889
Feedback: 0% (0)
Link To This Post
Posted: 7/20/2005 5:57:14 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4890
Feedback: 0% (0)
Link To This Post
Posted: 7/20/2005 6:00:18 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
TheTic00
Discounts for members from a kitchen table dealer
Offline
Posts: 724
Feedback: 100% (509)
Link To This Post
Posted: 7/20/2005 3:30:08 PM
[Last Edit: 8/18/2005 10:47:38 AM by TheTic00]
received mine and I love it. Super easy install and it solved a major issue with my AR74 build!
Denny is a great guy to deal with, fast shipping and super honest.

Thanks Denny


Derek
Like a great blue salmon of Justice, the mighty Tick courses upstream to the very spawning ground of evil.
dennysguns
Offline
Posts: 4932
Feedback: 0% (0)
Link To This Post
Posted: 7/23/2005 9:59:42 AM

Originally Posted By TheTic00:
received mine and I love it. Super easy install!



Thanks for the bump and the comments

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 4998
Feedback: 0% (0)
Link To This Post
Posted: 7/28/2005 8:20:29 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5098
Feedback: 0% (0)
Link To This Post
Posted: 8/3/2005 8:05:49 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
TheTic00
Discounts for members from a kitchen table dealer
Offline
Posts: 784
Feedback: 100% (509)
Link To This Post
Posted: 8/3/2005 5:18:55 PM
[Last Edit: 8/18/2005 10:48:50 AM by TheTic00]
Free bump
these pins rock
Like a great blue salmon of Justice, the mighty Tick courses upstream to the very spawning ground of evil.
NapoleonBonaparte
Offline
Posts: 40
Feedback: 100% (25)
Link To This Post
Posted: 8/4/2005 12:26:21 AM
Would I be able to use the non rotation pins with a hammer that no longer has a j-pin in it?
dennysguns
Offline
Posts: 5109
Feedback: 0% (0)
Link To This Post
Posted: 8/5/2005 6:11:59 AM

Originally Posted By NapoleonBonaparte:
Would I be able to use the non rotation pins with a hammer that no longer has a j-pin in it?



Yes
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
NapoleonBonaparte
Offline
Posts: 43
Feedback: 100% (25)
Link To This Post
Posted: 8/5/2005 11:59:53 AM
Order placed
TheTic00
Kitchen table dealer?
Offline
Posts: 795
Feedback: 100% (509)
Link To This Post
Posted: 8/5/2005 4:41:28 PM
[Last Edit: 8/18/2005 10:48:08 AM by TheTic00]
Once again Denny is the man
Like a great blue salmon of Justice, the mighty Tick courses upstream to the very spawning ground of evil.
dennysguns
Offline
Posts: 5115
Feedback: 0% (0)
Link To This Post
Posted: 8/5/2005 8:20:44 PM
Derek

Not at all. I don't ignore my customers. Your emails are obviously not getting thru. How's about trying the phone. I do need some information to look up an order and get it set straight. Call my cell. I want to get you right. 816 809 9452.

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5179
Feedback: 0% (0)
Link To This Post
Posted: 8/9/2005 8:54:51 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5180
Feedback: 0% (0)
Link To This Post
Posted: 8/9/2005 8:57:16 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
SamColt
Member
Offline
Posts: 666
Feedback: 100% (69)
Link To This Post
Posted: 8/10/2005 3:43:26 PM
Denny,

Quick question - I like to think I am fairly up on the specs of my rifles but the pin sizes confuse me a bit. I want 2 sets of these and this what I have.

A Colt 6721 and Colt Lightweight Sporter Blue Label.

Do you know off the top of your head which sets I need to order or do you know the sizes as I have a mic and can measure to confirm.

Thanks
HBAR16
Vagueification Engineer
Offline
Posts: 806
Feedback: 100% (5)
Link To This Post
Posted: 8/10/2005 4:42:27 PM
Which size fits LMT lowers ? Standard or oversize ?
"You got a weapon, I got a weapon. HBAR16's got a weapon. Everybody's got a weapon! And that's how it should be."
dennysguns
Offline
Posts: 5205
Feedback: 0% (0)
Link To This Post
Posted: 8/11/2005 6:16:17 AM

Originally Posted By SamColt:
Denny,

Quick question - I like to think I am fairly up on the specs of my rifles but the pin sizes confuse me a bit. I want 2 sets of these and this what I have.

A Colt 6721 and Colt Lightweight Sporter Blue Label.

Do you know off the top of your head which sets I need to order or do you know the sizes as I have a mic and can measure to confirm.

Thanks



Email sent.

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5206
Feedback: 0% (0)
Link To This Post
Posted: 8/11/2005 6:16:47 AM

Originally Posted By HBAR16:
Which size fits LMT lowers ? Standard or oversize ?



Standard .154

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
HBAR16
Vagueification Engineer
Offline
Posts: 809
Feedback: 100% (5)
Link To This Post
Posted: 8/12/2005 5:04:33 PM

Originally Posted By dennysguns:

Originally Posted By HBAR16:
Which size fits LMT lowers ? Standard or oversize ?



Standard .154

Denny



Order submitted via website and payment via Paypal for TWO sets to fit .154 receiver.
"You got a weapon, I got a weapon. HBAR16's got a weapon. Everybody's got a weapon! And that's how it should be."
dennysguns
Offline
Posts: 5303
Feedback: 0% (0)
Link To This Post
Posted: 8/17/2005 9:18:31 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
SBRIT007
Offline
Posts: 302
Feedback: 100% (27)
Link To This Post
Posted: 8/21/2005 7:53:38 PM
Denny,
Payment sent for 1 KNS STD kit
dennysguns
Offline
Posts: 5410
Feedback: 0% (0)
Link To This Post
Posted: 8/24/2005 7:18:40 PM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5478
Feedback: 0% (0)
Link To This Post
Posted: 8/27/2005 6:11:56 PM
new lower price
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5534
Feedback: 0% (0)
Link To This Post
Posted: 9/1/2005 9:05:14 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5702
Feedback: 0% (0)
Link To This Post
Posted: 9/13/2005 1:56:07 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5808
Feedback: 0% (0)
Link To This Post
Posted: 9/18/2005 6:37:40 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5852
Feedback: 0% (0)
Link To This Post
Posted: 9/24/2005 8:50:51 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 5904
Feedback: 0% (0)
Link To This Post
Posted: 9/27/2005 8:01:58 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 6120
Feedback: 0% (0)
Link To This Post
Posted: 10/11/2005 11:21:13 PM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
bolster
Offline
Posts: 190
Feedback: 100% (123)
Link To This Post
Posted: 10/14/2005 9:29:34 AM
Order placed.
dennysguns
Offline
Posts: 6207
Feedback: 0% (0)
Link To This Post
Posted: 10/18/2005 5:53:25 AM

Originally Posted By bolster:
Order placed.



Bolster

thanks for the order

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 6243
Feedback: 0% (0)
Link To This Post
Posted: 10/22/2005 12:17:59 PM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 6368
Feedback: 0% (0)
Link To This Post
Posted: 10/30/2005 9:20:31 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
mattld
Shit's chess it ain't checkers ...
Offline
Posts: 3267
Feedback: 0% (0)
Link To This Post
Posted: 10/30/2005 9:25:17 AM
I got some of these from Denny a while back and they are still holding up like champs.

IMO, you can't go wrong with these pins.
stanz792
Offline
Posts: 2
Feedback: 0% (0)
Link To This Post
Posted: 11/3/2005 5:36:43 PM
I've been watching this board for about 3 yrs and finally decided to become a member. I think its fitting to applaud Denny Guns for oustanding service. I recently purchased a MIAD grip and KNS anti-walk pin set. Recieved both promptly and on the latter recieved a personal phone call from him about an order problem. Two Thumbs Up!
stanz792
Offline
Posts: 3
Feedback: 0% (0)
Link To This Post
Posted: 11/3/2005 5:41:10 PM
I've been watching this board for about 3 yrs and finally decided to become a member. I think its fitting to applaud Denny Guns for oustanding service. I recently purchased a MIAD grip and KNS anti-walk pin set. Recieved both promptly and on the latter recieved a personal phone call from him about an order problem. Two Thumbs Up!
dennysguns
Offline
Posts: 6482
Feedback: 0% (0)
Link To This Post
Posted: 11/7/2005 8:45:17 PM

Originally Posted By stanz792:
I've been watching this board for about 3 yrs and finally decided to become a member. I think its fitting to applaud Denny Guns for oustanding service. I recently purchased a MIAD grip and KNS anti-walk pin set. Recieved both promptly and on the latter recieved a personal phone call from him about an order problem. Two Thumbs Up!



Thank you!

Denny
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
dennysguns
Offline
Posts: 6517
Feedback: 0% (0)
Link To This Post
Posted: 11/11/2005 7:02:05 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
The_Lynch_Family
Offline
Posts: 2
Feedback: 100% (35)
Link To This Post
Posted: 11/14/2005 1:49:14 PM
Order placed off of your website for one AR15/M16 High Tech Non-Rotational Hammer/Trigger Pins with Retainers.
I need the size that will work in a Bushmaster Lower.
Thanks
Brian
DonD
Offline
Posts: 45
Feedback: 100% (6)
Link To This Post
Posted: 11/18/2005 10:55:18 AM
I bought a Stag lower parts kit from another dealer and the kit came with only one trigger and hammer pin instead of two. When I called the dealer I bought it from he told me to call Stag. I called Denny about ordering the KNS pin set and at first he though he was out of the size I needed but offered to send me a trigger pin so I could get the lower up and running untill the KNS set came in. It turned out he did have the KNS pins set I needed and shipped them to me. The install was easy. Thanks again Denny. From now on when I think about service I think about Denny.
dennysguns
Offline
Posts: 6621
Feedback: 0% (0)
Link To This Post
Posted: 11/23/2005 7:16:33 AM
Dennys Guns
GTS,LLC
2001 Clay ST.
NKC,MO 64116
07/02 Mfg.
Shop:816 221 9117 Ext. 11
Cell: 816 809 9452
Fax: 816 221 1171
www.globaltactical.com
  Previous Page
Page:  / 8