Daniel Defense 7.62 Lite Rail 7.0, Carbine $229.95

The 7.62 Lite Rail features our patented "Bolt-Up System" allowing simplified alignment to the host weapon upper receiver and providing a continuous, uninterrupted upper rail platform for weapons with flat top upper receivers. The battle proven "Bolt-Up System" is also used on the Daniel Defense RIS II (selected by SOCOM for the SOPMOD II program). Every component of the 7.62 Lite Rail has been precisely assessed, thoroughly shot & tested, improved upon, and manufactured tough enough to become the new benchmark in 7.62 rail systems. Using specifically engineered barrel nuts, the Daniel Defense 7.62 Lite Rail is compatible with the Armalite AR10, Rock River Arms LAR-8, and DPMS LR-308 rifles.

Daniel Defense 7.62 Lite Rail 12.0 - Armalite Barrel Nut $299.95

The Daniel Defense 7.62 12.0 Lite Rail was designed to work with the AR10, DPMS, and Rock River Arms LAR-8 .308 rifle length gas systems; but works equally as well mounted over top of a low profile gas block.

The rail and bolt up plate are machined from 6061-T6 aircraft grade aluminum and all fasteners are military specification.

The rail’s unique “Bolt Up” mounting system mates with the upper receiver to create a singular ëmonolithic’ rail along the entire top portion of the rifle. The rail interface not only free-floats the rifle’s barrel for improved accuracy, but also generates huge benefits when mounting optics and accessories.

If you plan to use the 7.62 Lite Rail on an Armalite AR10 upper receiver you may have to the replace ejection port cover hinge pin to a longer length due to the bolt up plate position in relation to Armalite’s upper receiver design. Otherwise the Ejection Port Cover pin may not be captured and could come loose.

PLEASE ENSURE THAT YOU PURCHASE THE CORRECT BARREL NUT FOR YOUR FIREARM. USING THE INCORRECT BARREL NUT CAN RESULT IN INJURY OR DEATH

Daniel Defense 7.62 Lite Rail 12.0 - DMPS Barrel Nut $299.95

The Daniel Defense 7.62 12.0 Lite Rail was designed to work with the AR10, DPMS, and Rock River Arms LAR-8 .308 rifle length gas systems; but works equally as well mounted over top of a low profile gas block.

The rail and bolt up plate are machined from 6061-T6 aircraft grade aluminum and all fasteners are military specification.

The rail’s unique “Bolt Up” mounting system mates with the upper receiver to create a singular ëmonolithic’ rail along the entire top portion of the rifle. The rail interface not only free-floats the rifle’s barrel for improved accuracy, but also generates huge benefits when mounting optics and accessories
PLEASE ENSURE THAT YOU PURCHASE THE CORRECT BARREL NUT FOR YOUR FIREARM. USING THE INCORRECT BARREL NUT CAN RESULT IN INJURY OR DEATH

btt

bump

bump

bump

bump

bump

bump

bump

btt

btt

btt

btt

btt

bump

btt

ttt

btt

btt

btt

bump

btt

btt

btt

btt

btt