These came out of a California Colt - probably a Government 6520 where the lower had to be destroyed per their dumb laws. Looks to be off an agency rifle as there are numbers on the stock and tube. All parts are used. Some parts have "character marks" which I have tried to have show up in the picture.

Please post the "I will take it here" first so I can keep track of time stamps.

All prices shipped legal lower 48 states USPS Money order. Discrete PP +4%.


9. Colt M/MPC marked bolt carrier assembly, Shows some wear but lots of life left. This is the Colt version with the milled off rear. AR15 version. $125 keeping with the barrel for another build
11. Colt M4 handguards. Not original to this model rifle but are Colt - $25
12. Colt "blackish" charging handle - probably off a newer Colt from work done by the agency smith as the old ones were greyish in color - $25 keping for another build



1. Colt safety - $15 SPF to Lilgabby
2. Colt "H:" marked bolt catch - $20 SPF to Lilgabby
3. Colt large front pivot pin - $10 SOLD
4. Colt what looks like a "7" marked milspec pin hammer and what looks like a "F" marked milspec pin trigger assembly -$50 SPF to Xooxan
5. Colt CMB marked A2 upper. Large front hole with sleeve and milspec rear hole. Has factory M4 cuts. Wear marks on handle area edges and windage adjustment wheels, small mark on deflector. Color is a Colt dark greyish - $100
6. Colt grey delta ring with spring and C clip. Some marks but not bad - hard to get to show up but they are there - $25 SPF to Lilgabby
7. Colt grey button mag catch assembly - $25 SPF to mojave30cal
8. Colt grey trigger guard. Small mark (above the "8") not too visible but there - $15 SPF to Lilgabby
10. Colt 2 position receiver extension complete with old but new buffer, spring and stock. Stock does not have the N or 1 but is identical to my other stock and fits all my other milspec tubes fine. Has the number "14" on one side and on the top. The receiver extension has a letter "B" and number "5" stamped on the top near the threads. Almost looks like a factory Stamping. $80 SPF to fastswift

I'll take #7: Colt Grey button mag catch assy, for $25.00.

I'll take this:
4. Colt what looks like a "7" marked milspec pin hammer and what looks like a "F" marked milspec pin trigger assembly -$50