I have the following casting setup for sale:

Two Magma Engineering Mark V/VI Bullet Masters
These commercial grade machines will cast 4000 pieces per hour in just about any caliber/bullet type you want; assuming you have molds for them. Both these machines have been upgraded to the latest pneumatic functions (knockers, pour, etc). You will need 220/230V single phase AC Power and 90 psi of air to make these run.

Magma Master Caster
This is a manual bullet caster that uses the same molds as the bullet master. 110V power and no air needed. This particular machine was converted to automatic by the previous owner, but the automatic functions no longer seem to work. It can probably be made to work with some tinkering, but I haven't had the time.

Magma Lube Master
This automatic machine will lube and size your cast bullets at a rate of 6000 an hour. It includes the M-A auto feeding system, and multiple size dies needed to size whatever bullet you have cast; size dies are included that you need for the molds listed below. Also have many lube sticks that you will get as well. Requires a 120V supply and shop air around 60psi.

Molds:
I have 24 sets of 8 dual cavity molds in all common handgun calibers. I also have 3 individual molds in .45 (for .45-70 style loads) at 300gr, 350gr and 405gr.

List of Mold Sets (Cal then grain then style) (Missing 4 sets; will search and add the missing ones)
45 250 FP
45 230 RN
45 200 RN
45 185 SWC
45 160 SWC
44 240 SWC
44-40 200 RN-FP
41 215 SWC
40 155 SWC
40 155 RN
40 180 FP
40/10mm 170 SWC
40 140 RNFP
38 148 SWC
38 158 RN
38 158 SWC
38 160 RN (For 38 Super)
9 147 RNFP
9 125 RNFP
32-20 115 RNFP

Alloy:
I have 1 ton (2000 pounds) and change of the standard, hard cast bullet alloy (aka the 92% lead/6% antimony/2% tin). Right now at Rotometals, price per pound is $2.28, if you buy a ton. That makes this $4560.

There is also miscellaneous tools, extras, parts, etc that goes with the machines.

The machines are in working order; I will show you some basic information to point out some tips, but these machines should really be used by somebody with some mechanical aptitude.
Pictures will be added in the next few days.

Now, if you went out and bought this stuff from Magma, plus the alloy, you would spend something just shy of $40,000.

You will get all this and we will deliver it to anywhere in the lower 48 states for $25,000. We will also entertain serious offers as well.

This is a package deal; we are not going to part this out.

Single phase; just made an edit to specify.

I went by and took pictures yesterday afternoon; I will put them up this evening or the next.

I realized later that I did not have anyplace handy to post these pictures. Until I can find a place to put them up, please email me and I will send you pictures.

Have these sold already? Photos never got posted...

no replies since march....

This equipment has been sold, pending final payment. A deposit has already been received.

Thanks for all the interest.