User Panel
[#2]
|
|
[Insert Witty Comment Here]
|
[#3]
Originally Posted By Gopherboy128:
http://i114.photobucket.com/albums/n266/gopherboy128/20160415_131430_zpssgodcfxd.jpg View Quote I didn't need an MP5SD until I saw this photo... |
|
|
[Last Edit: eodinert]
[#4]
Originally Posted By carmodyh:
So I got this Titan Defense TD415 upper which is a clone of the HK416 10.4 upper... posted it in the Titan Defense thread... it runs just fine both with and without a suppressor but accuracy leaves a lot to be desired, but ill take it back out this weekend and see how it does with a better trigger... anyways, shooting it has me looking at legit HK MR556s... now, it would definitely go to Investment Grade Firearms for a barrel chop, however, the question is, I'm wondering whether I would want to: 1) form 1 the HK lower before 41F kicks in because its simple right now and have IGF cut down to a 10.4 inch spec, or... 2) leave the lower as is and just have him cut down to 14.5 inches and pin an AAC 51T to it Option 2 would make the gun easier to move should I ever want to offload it... I already have like 4 lowers that are SBRs... but I sort of want that whole HK gun thing... what say the HK thread? I have a SCAR 16 SBR already, so I don't know why I would want another piston gun that is arguably heavier than the SCAR or any other adjustable gas DI offering like a switchblock or Micro MOA govnah... but I cant help myself sometimes, especially with this next political season coming up... I mean, I know the 416 in the MR556 generation isn't as up to date as the A3 or A5 models, but as I understand it, CAG and the FBI HRT are still using them, so I figure it cant be that bad of a rifle if they are still rocking them with the ability to move on to something else over the last several years... anyways... thoughts? View Quote I was really close to buying one of those uppers, and getting a CMC machine clone lower to finish it off... at the end of the day, I would have been in it for almost the cost of an MR556.... so I got an MR556. The issue with the factory profile is more the weight than the length. I'd have it re-contoured long before I cut it to 14.5. Permanently attached muzzle anything is a crime against humanity. Either 16 inches, or SBR. Since you already have a 10.4 upper, SBR the lower, and if you really have a boner for a 14.5 upper, you don't have to mess with anything other than standard threads. |
|
|
[#5]
Originally Posted By eodinert:
I was really close to buying one of those uppers, and getting a CMC machine clone lower to finish it off... at the end of the day, I would have been in it for almost the cost of an MR556.... so I got an MR556. The issue with the factory profile is more the weight than the length. I'd have it re-contoured long before I cut it to 14.5. Permanently attached muzzle anything is a crime against humanity. Either 16 inches, or SBR. Since you already have a 10.4 upper, SBR the lower, and if you really have a boner for a 14.5 upper, you don't have to mess with anything other than standard threads. View Quote View All Quotes View All Quotes Originally Posted By eodinert:
Originally Posted By carmodyh:
So I got this Titan Defense TD415 upper which is a clone of the HK416 10.4 upper... posted it in the Titan Defense thread... it runs just fine both with and without a suppressor but accuracy leaves a lot to be desired, but ill take it back out this weekend and see how it does with a better trigger... anyways, shooting it has me looking at legit HK MR556s... now, it would definitely go to Investment Grade Firearms for a barrel chop, however, the question is, I'm wondering whether I would want to: 1) form 1 the HK lower before 41F kicks in because its simple right now and have IGF cut down to a 10.4 inch spec, or... 2) leave the lower as is and just have him cut down to 14.5 inches and pin an AAC 51T to it Option 2 would make the gun easier to move should I ever want to offload it... I already have like 4 lowers that are SBRs... but I sort of want that whole HK gun thing... what say the HK thread? I have a SCAR 16 SBR already, so I don't know why I would want another piston gun that is arguably heavier than the SCAR or any other adjustable gas DI offering like a switchblock or Micro MOA govnah... but I cant help myself sometimes, especially with this next political season coming up... I mean, I know the 416 in the MR556 generation isn't as up to date as the A3 or A5 models, but as I understand it, CAG and the FBI HRT are still using them, so I figure it cant be that bad of a rifle if they are still rocking them with the ability to move on to something else over the last several years... anyways... thoughts? I was really close to buying one of those uppers, and getting a CMC machine clone lower to finish it off... at the end of the day, I would have been in it for almost the cost of an MR556.... so I got an MR556. The issue with the factory profile is more the weight than the length. I'd have it re-contoured long before I cut it to 14.5. Permanently attached muzzle anything is a crime against humanity. Either 16 inches, or SBR. Since you already have a 10.4 upper, SBR the lower, and if you really have a boner for a 14.5 upper, you don't have to mess with anything other than standard threads. Eodinert, Thanks for the input. I considered the same cnc machining route, but I agree getting an actual HK gun is really a better route. Depending on how it shoots I guess will determine whether it becomes a 10.4 or a 14.5 on the sbr'ed lower... Thanks again! I'm guessing you still like yours? |
|
|
[#6]
|
|
|
[#7]
|
|
The NFA Review Channel as found on Full30, YouTube, Facebook and Instagram.
|
[#8]
Originally Posted By NFAREVIEW:
I'll take some family pics of all the suppressed HK Handguns and the MP5's when the second DT Reverse Stretch comes in! http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01875-2_zps8nlkru1g.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01875-3_zpsli2uf0vi.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01881_zpskmqnqta4.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01881-2_zpsppbq1ls6.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01892_zpss8rqvmwi.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01896-2_zpsr5ql1vis.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01897_zpstg7g6z2r.jpg http://i1089.photobucket.com/albums/i356/Firefighter1291/DSC01926_zpsm94xtuym.jpg View Quote Those are excellent pics!! cheers |
|
Failure has far too many fathers. -MMB
|
[#9]
Thanks! Shot using my Sony A7Rii with Zeiss f1.8 55mm lens and lightly edited in LR6. The camera is SHARP! |
|
The NFA Review Channel as found on Full30, YouTube, Facebook and Instagram.
|
[#10]
|
|
|
[#11]
|
|
|
[#12]
Originally Posted By brodband8:
g36c conversion. <a href="http://s61.photobucket.com/user/BrOdBaNd_2006/media/263E3B17-A37D-4B2E-8D65-CF5764BCD85A_zps0yfqqrrh.jpg.html" target="_blank">http://i61.photobucket.com/albums/h80/BrOdBaNd_2006/263E3B17-A37D-4B2E-8D65-CF5764BCD85A_zps0yfqqrrh.jpg</a> View Quote very slick |
|
|
[#13]
Originally Posted By ARUDD:
<a href="http://http://i1153.photobucket.com/albums/p517/aarudd1/Mobile%20Uploads/image_1.jpeg</a>][ View Quote I would love to hear more about this set up. |
|
If Cruz had won: Originally Posted By lostnswv: I'm punching in Donald Trump and voting against every Republican down ballot.
|
[#14]
Originally Posted By AnthonyL:
I wish they would release a Omega 9 non-K I would be all over it. For my subguns I want a little more length. BTW, I ordered and received a Griffin 3-lug adapter for my Octane. The Griffin 3-lug adapter is supposedly made to the original HK 3-lug spec. In other words it's very specific. My new UMP 3-lug barrel doesn't work with it. Tonight I will find out how that compares to the SiCo 3-lug adapter. I do know the AAC Triad 3-lug adapter is designed to be more lenient and will work with any 3-lug barrel. So short story, be prepared for some inconsistencies in 3-lug compatibility with the Griffin mount. View Quote View All Quotes View All Quotes Originally Posted By AnthonyL:
Originally Posted By Gopherboy128:
I just pulled the trigger today on the SilencerCo Omega 9K for my MP5K, going to run it with the Griffin Armament 3-lug. Keep its overall length down, to go with the K look. I wish they would release a Omega 9 non-K I would be all over it. For my subguns I want a little more length. BTW, I ordered and received a Griffin 3-lug adapter for my Octane. The Griffin 3-lug adapter is supposedly made to the original HK 3-lug spec. In other words it's very specific. My new UMP 3-lug barrel doesn't work with it. Tonight I will find out how that compares to the SiCo 3-lug adapter. I do know the AAC Triad 3-lug adapter is designed to be more lenient and will work with any 3-lug barrel. So short story, be prepared for some inconsistencies in 3-lug compatibility with the Griffin mount. My SiCo, both Gemtechs, and now a Griffin 3-Lug all work on my RCM 3-lug barrel, and my HK factory 3-lug barrel. Dont know if its Griffins adapter, or Mike's barrel but something doesnt jive in your setup. |
|
[Insert Witty Comment Here]
|
[#15]
Originally Posted By carmodyh:
Eodinert, Thanks for the input. I considered the same cnc machining route, but I agree getting an actual HK gun is really a better route. Depending on how it shoots I guess will determine whether it becomes a 10.4 or a 14.5 on the sbr'ed lower... Thanks again! I'm guessing you still like yours? View Quote I don't know, I've never shot it I'm contracting in Africa, it's waiting for me when I get home. By the time I get done making it into the rifle I want it to be (10.4 inch barrel, SBR, RAL8000 tan with an optic and some HK accessories) it will be retardedly expensive. |
|
|
[#16]
|
|
Every man is a warrior inside...but the choice to fight is his own
|
[#17]
Originally Posted By khadafy:
Love this little guy http://<a href=http://i747.photobucket.com/albums/xx113/khadafy1323/Mobile%20Uploads/2016-04/0A8DBDB7-3F9B-4EC9-874B-C82D070780DB.jpg</a>" /> View Quote Jealous. Cant wait to have mine. Going to run the Griffin 3-lug. |
|
[Insert Witty Comment Here]
|
[#18]
|
|
|
[#19]
How hard is that fore guard to install ?
|
|
|
[#20]
How hard is that fore guard to install ?
|
|
|
[#21]
Originally Posted By Wamba2:
<a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical2_zpsaykfxkd6.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical2_zpsaykfxkd6.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical6_zps25zmye2q.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical6_zps25zmye2q.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical9_zpsx5s7xywn.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical9_zpsx5s7xywn.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical10_zpssqeuuruq.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical10_zpssqeuuruq.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical12_zpsxcqq4mrb.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical12_zpsxcqq4mrb.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical11_zps5ypifjq8.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical11_zps5ypifjq8.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical1_zpszzqpxzsj.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical1_zpszzqpxzsj.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical13_zpsccvlugno.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical13_zpsccvlugno.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical14_zpscqeq9and.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical14_zpscqeq9and.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical8_zpsdr7mjd6e.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical8_zpsdr7mjd6e.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical5_zps66p3txcu.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical5_zps66p3txcu.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical15_zpsufmbubgm.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical15_zpsufmbubgm.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical7_zpsdwptuj8a.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical7_zpsdwptuj8a.jpg</a> <a href="http://s858.photobucket.com/user/5commando/media/G3%20Tactical3_zpse33jvssj.jpg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/G3%20Tactical3_zpse33jvssj.jpg</a> View Quote your rifle is retro-tastic.... totally dig it. That buttstock cant be pleasant under a full power .308 though... maybe enough weight in the gun to make it a little more bearable? sick blaster man |
|
|
[#22]
|
|
|
[#24]
|
|
Anybody (and I do mean ANYBODY) but Hillary 2016
|
[#25]
|
|
|
[#26]
|
|
|
[#27]
|
|
|
[#28]
|
|
|
[#29]
Originally Posted By Wamba2: Size comparison: http://i858.photobucket.com/albums/ab147/5commando/image_zpskxjhbcc6.jpeg http://i858.photobucket.com/albums/ab147/5commando/image_zpspquta3uw.jpeg View Quote |
|
"Please do not refer other members as cum dumpsters and peter puffers." -Aimless
AZ native |
[#30]
|
|
|
[#31]
Originally Posted By Federov:
My PTR K3P. Welded on a MFIAP extended flash hider, threw on a surplus buttstock, and bipod. Still not sure what I'll do with it, but I like it so far. http://i.imgur.com/Zi5nNEV.jpg View Quote totally dig.... |
|
|
[#33]
Originally Posted By carmodyh:
totally dig.... View Quote View All Quotes View All Quotes Originally Posted By carmodyh:
Originally Posted By Federov:
My PTR K3P. Welded on a MFIAP extended flash hider, threw on a surplus buttstock, and bipod. Still not sure what I'll do with it, but I like it so far. http://i.imgur.com/Zi5nNEV.jpg totally dig.... |
|
|
[#34]
|
|
|
[#35]
|
|
|
[#36]
Originally Posted By 01SVTSnake:
Waiting on a few builds to wrap up but heres my favorite pistol caliber clone from my collection Dakota Tactical D54P/10 SBR. Really fun with a sear installed with Underwood 180gr ammo <a href="http://s434.photobucket.com/user/01SVTSnake/media/Guns/D54P10mm-1_zpsdh4vvbng.jpg.html" target="_blank">http://i434.photobucket.com/albums/qq70/01SVTSnake/Guns/D54P10mm-1_zpsdh4vvbng.jpg</a> View Quote You sir, are a god among men with that build... Total dream gun that I've never been able to jump the fence on... Thanks for sharing! |
|
|
[#38]
Originally Posted By Wamba2:
Great looking guns Gentlemen!!! The PTR K3 rocks the house Fedorov! The 416 old set-up looks pretty cool, more like a CBQ than the new set-up. Very nice both set-ups ic_guerrero! The MP5 10 clone is a superb looking smg! I always like the 2 round burst set-up. Congrats on that one 01SVTSnake! Here two of our 'little ones', HK33K and HK53: <a href="http://s858.photobucket.com/user/5commando/media/image_zps9uze3l4t.jpeg.html" target="_blank">http://i858.photobucket.com/albums/ab147/5commando/image_zps9uze3l4t.jpeg</a> View Quote Very nice! Out of curiosity are these guns personally/privately owned or issued? |
|
|
[#39]
|
|
|
[#40]
|
|
|
[Last Edit: kylemishaps]
[#41]
|
|
|
[#42]
|
|
|
[#43]
|
|
"He had the right hand of the devil strapped tightly to his side."-The Last Cowboy
|
[#44]
|
|
|
[#45]
|
|
[Insert Witty Comment Here]
|
[#46]
View Quote I would drop one my closest friends to add you as my new range buddy |
|
|
[#47]
|
|
|
[#48]
|
|
Uncle
Sam's Misguided Children April 2016 "FBHO has been pretty pro gun so far, or at a minimum..neutral." - CPT_CAVEMAN |
[#49]
Originally Posted By dangerdan:
Added a couple parts for my G38 clone..... <a href="http://smg.photobucket.com/user/ermey/media/edited_20160815_163908_zpsmtorr3m6.jpg.html" target="_blank">http://img.photobucket.com/albums/v37/ermey/edited_20160815_163908_zpsmtorr3m6.jpg</a> View Quote G28? |
|
[Insert Witty Comment Here]
|
[#50]
Originally Posted By Gopherboy128: Originally Posted By dangerdan: Added a couple parts for my G38 clone..... <a href="http://smg.photobucket.com/user/ermey/media/edited_20160815_163908_zpsmtorr3m6.jpg.html" target="_blank">http://img.photobucket.com/albums/v37/ermey/edited_20160815_163908_zpsmtorr3m6.jpg</a> G28? G38. 416A5 for all intents and purposes |
|
Uncle
Sam's Misguided Children April 2016 "FBHO has been pretty pro gun so far, or at a minimum..neutral." - CPT_CAVEMAN |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.