User Panel
View Quote I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. |
|
Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. View Quote View All Quotes View All Quotes Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. Red dot bro, irons are for poor people |
|
Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. View Quote View All Quotes View All Quotes Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. The problem is that thus far you are the only person that seems to be asking for that. Everyone else says it makes the gun look too blocky. FYI If there is demand for it I will be happy to make some "UMP" style" forends, but thus far I haven't seen any real demand for it, and we can't afford to program and run a one-off with our current workload on the machines. Sven Manticore Arms |
|
I am a bit weird, I'll give ya that, but there's gotta be other people that agree out there. Your extended tavor handguard is full length on top...as is your AR rail system. The only one that isn't, it seems, is the scorpion one. Is it just because the factory one has the angular look or because the consumer has deemed that scorpion front ends should have the slope? What was the design process like there?
Posted Via AR15.Com Mobile |
|
Excuse my ignorance, but is the back of the receiver the same on the pistol AND the carbine? Could one use the Magpul AK stock kit shown a couple pages back on the carbine, if one didn't like the factory carbine stock?
Thanks. |
|
Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. View Quote View All Quotes View All Quotes Quoted:
I'm the name of all that is holy, will someone please make a Evo handguard that has a fill length top rail?!?!?!? That rail should stop about 1/8" short of the muzzle device threads. Give us sight radius or give us death!!!!!! Not sure what the problem is. No one would put out an AR rail that sloped in that direction. Yes, I know the factory handguard is that way...and it's the worst aspect of the factory design outside of the safety. Millions of AR with carbine barrel and 7inch FF rail out there Seriously.. A couple of inches wont make a difference as far as accuracy |
|
Quoted:
I am a bit weird, I'll give ya that, but there's gotta be other people that agree out there. Your extended tavor handguard is full length on top...as is your AR rail system. The only one that isn't, it seems, is the scorpion one. Is it just because the factory one has the angular look or because the consumer has deemed that scorpion front ends should have the slope? What was the design process like there? Posted Via AR15.Com Mobile View Quote As far as designs, a straight cut forend has two issues- it looks really blocky and looks pretty plain and boring (I know because that is the starting point I worked with on the design and went through about 6-8 revisions to get to the final look), and that top part has the majority of the weight of the part in it. The feedback we got from those that we showed the design to was that straight cut looks boring and blocky. Cutting it back makes it more aesthetically pleasing, and lightens up the forend. At typical pistol caliber carbine ranges of sub 100 yards, you will not see any difference with a 12" vs 14" sight radius, but most people will feel the different in weight, and ultimately if people don't like the way it looks they won't buy it- and if I make them and they don't buy it then I am stuck with money invested in a product that isn't selling. Sven Manticore Arms |
|
Quoted:
Excuse my ignorance, but is the back of the receiver the same on the pistol AND the carbine? Could one use the Magpul AK stock kit shown a couple pages back on the carbine, if one didn't like the factory carbine stock? Thanks. View Quote Yes the pistol and the rifle have the same receiver and use the same stock attachment system. |
|
Quoted:
As far as designs, a straight cut forend has two issues- it looks really blocky and looks pretty plain and boring (I know because that is the starting point I worked with on the design and went through about 6-8 revisions to get to the final look), and that top part has the majority of the weight of the part in it. The feedback we got from those that we showed the design to was that straight cut looks boring and blocky. Cutting it back makes it more aesthetically pleasing, and lightens up the forend. At typical pistol caliber carbine ranges of sub 100 yards, you will not see any difference with a 12" vs 14" sight radius, but most people will feel the different in weight, and ultimately if people don't like the way it looks they won't buy it- and if I make them and they don't buy it then I am stuck with money invested in a product that isn't selling. Sven Manticore Arms View Quote View All Quotes View All Quotes Quoted:
Quoted:
I am a bit weird, I'll give ya that, but there's gotta be other people that agree out there. Your extended tavor handguard is full length on top...as is your AR rail system. The only one that isn't, it seems, is the scorpion one. Is it just because the factory one has the angular look or because the consumer has deemed that scorpion front ends should have the slope? What was the design process like there? Posted Via AR15.Com Mobile As far as designs, a straight cut forend has two issues- it looks really blocky and looks pretty plain and boring (I know because that is the starting point I worked with on the design and went through about 6-8 revisions to get to the final look), and that top part has the majority of the weight of the part in it. The feedback we got from those that we showed the design to was that straight cut looks boring and blocky. Cutting it back makes it more aesthetically pleasing, and lightens up the forend. At typical pistol caliber carbine ranges of sub 100 yards, you will not see any difference with a 12" vs 14" sight radius, but most people will feel the different in weight, and ultimately if people don't like the way it looks they won't buy it- and if I make them and they don't buy it then I am stuck with money invested in a product that isn't selling. Sven Manticore Arms all of this makes sense. Still want one though. I need a mill. |
|
Quoted:
all of this makes sense. Still want one though. I need a mill. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I am a bit weird, I'll give ya that, but there's gotta be other people that agree out there. Your extended tavor handguard is full length on top...as is your AR rail system. The only one that isn't, it seems, is the scorpion one. Is it just because the factory one has the angular look or because the consumer has deemed that scorpion front ends should have the slope? What was the design process like there? Posted Via AR15.Com Mobile As far as designs, a straight cut forend has two issues- it looks really blocky and looks pretty plain and boring (I know because that is the starting point I worked with on the design and went through about 6-8 revisions to get to the final look), and that top part has the majority of the weight of the part in it. The feedback we got from those that we showed the design to was that straight cut looks boring and blocky. Cutting it back makes it more aesthetically pleasing, and lightens up the forend. At typical pistol caliber carbine ranges of sub 100 yards, you will not see any difference with a 12" vs 14" sight radius, but most people will feel the different in weight, and ultimately if people don't like the way it looks they won't buy it- and if I make them and they don't buy it then I am stuck with money invested in a product that isn't selling. Sven Manticore Arms all of this makes sense. Still want one though. I need a mill. Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. |
|
Kick ass. You da man Sven. Hell, I'd take an unfinished prototype of there was on laying around! A limited edition ump-style run would be awesome too.
Posted Via AR15.Com Mobile |
|
just installed HB industry trigger springs and it feels great ! that trigger return spring......
|
|
Quoted:
I don't have one of these yet, but will probably pick one up eventually: http://plate-design.com/products/acem-cz-s9-30-gen-4 http://cdn.shopify.com/s/files/1/0934/5064/products/ACEM_CZS9_30_GEN_4_A2.png?v=1464934114 View Quote View All Quotes View All Quotes Quoted:
Quoted:
Hey was wondering if anyone can recommend a speed loader? want to get one for my pops since he is having a hard time loading the mags of his EVO I don't have one of these yet, but will probably pick one up eventually: http://plate-design.com/products/acem-cz-s9-30-gen-4 http://cdn.shopify.com/s/files/1/0934/5064/products/ACEM_CZS9_30_GEN_4_A2.png?v=1464934114 thank you! |
|
Quoted:
The part in bold %110. It's just natural and intuitive there. It is how it should have been designed, IMO. Oh, and pics. <a href="http://s1323.photobucket.com/user/gvilleram/media/Mobile%20Uploads/20160826_202533_zpsadhstldk.jpg.html" target="_blank">http://i1323.photobucket.com/albums/u594/gvilleram/Mobile%20Uploads/20160826_202533_zpsadhstldk.jpg</a> View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
HB industries is AWESOME. Great service and gorgeously made products. Got my duckbill mag release and my right side AK lever today. Should have mags tomorrow. My EVO doesn't ship till tomorrow but by the time I get it..I should have everything a growing boy needs but the optic...still thinking about that. http://www.ar15.com/media/viewFile.html?i=90137 Stupid question: HB says the safety goes on the right. That mean its for your trigger finger to manipulate if right handed? Seems a bit odd if that's the case.... I just picked up a Scorp and all these places are out of parts Yes, you have it correct. Let me put it this way: the HB safety is extremely well designed and it works so well that you start gravitating to it immediately. I would HATE my CZ if it weren't for the HB safety. Very true http://i.imgur.com/YMYoKzs.jpg?1 The part in bold %110. It's just natural and intuitive there. It is how it should have been designed, IMO. Oh, and pics. <a href="http://s1323.photobucket.com/user/gvilleram/media/Mobile%20Uploads/20160826_202533_zpsadhstldk.jpg.html" target="_blank">http://i1323.photobucket.com/albums/u594/gvilleram/Mobile%20Uploads/20160826_202533_zpsadhstldk.jpg</a> I just installed my left side delete to complete my AK safety setup...wish I would have just gone this route to begin with. This safety setup changes the ergos so well! I tried a couple other setups and none work as well as the AK setup! Now, all I need is the Switchback to get released and I am good until my stamp comes in... |
|
Quoted:
Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I like the looks of that! |
|
Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I like the looks of that! +1 |
|
Quoted: Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg View Quote View All Quotes View All Quotes Quoted: Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). |
|
Quoted:
I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). Exactly. I may have to buy a carbine to SBR and keep the stock appearance I'll be doing the manticore slider stock, HBI paddle mag release & K foreend and a micro RDS. I think it's TDI that makes a teardrop shaped foregrip similar to the MP5k foregrip. Now to just find an m-lok one. I'll definitely upgrade the pistol grip too when someone can get the 3D printing right or injection mold one |
|
Quoted:
Exactly. I may have to buy a carbine to SBR and keep the stock appearance I'll be doing the manticore slider stock, HBI paddle mag release & K foreend and a micro RDS. I think it's TDI that makes a teardrop shaped foregrip similar to the MP5k foregrip. Now to just find an m-lok one. I'll definitely upgrade the pistol grip too when someone can get the 3D printing right or injection mold one View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). Exactly. I may have to buy a carbine to SBR and keep the stock appearance I'll be doing the manticore slider stock, HBI paddle mag release & K foreend and a micro RDS. I think it's TDI that makes a teardrop shaped foregrip similar to the MP5k foregrip. Now to just find an m-lok one. I'll definitely upgrade the pistol grip too when someone can get the 3D printing right or injection mold one Yeti Wurks has the Switchback grip (injection molded) slated for release at the end of this month. |
|
Quoted:
Yeti Wurks has the Switchback grip (injection molded) slated for release at the end of this month. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). Exactly. I may have to buy a carbine to SBR and keep the stock appearance I'll be doing the manticore slider stock, HBI paddle mag release & K foreend and a micro RDS. I think it's TDI that makes a teardrop shaped foregrip similar to the MP5k foregrip. Now to just find an m-lok one. I'll definitely upgrade the pistol grip too when someone can get the 3D printing right or injection mold one Yeti Wurks has the Switchback grip (injection molded) slated for release at the end of this month. That's good news. The IM one is supposed to have replaceable backstraps, no? I hope that it can be set up to be like their Matterhorn printed grip...which is pretty mp5ish in profile, even if it does have some extra texture. |
|
Quoted:
Yeti Wurks has the Switchback grip (injection molded) slated for release at the end of this month. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg I actually do like that, but it's a whole different gun now, I also like the factory scorpion look (SBR'd). Exactly. I may have to buy a carbine to SBR and keep the stock appearance I'll be doing the manticore slider stock, HBI paddle mag release & K foreend and a micro RDS. I think it's TDI that makes a teardrop shaped foregrip similar to the MP5k foregrip. Now to just find an m-lok one. I'll definitely upgrade the pistol grip too when someone can get the 3D printing right or injection mold one Yeti Wurks has the Switchback grip (injection molded) slated for release at the end of this month. Supposed to be better than the originals? |
|
jekbrown: yes, replaceable backstraps. I've read that it is supposed to be a mix of both the Everest and the Matterhorn depending on what backstrap you decided to use.
bradpierson26: It seems that's the idea. I know I've personally wanted a grip for my scorp that wasn't printed on a 3D printer. Doesn't seem that they would be strong enough (even though I have heard otherwise). |
|
|
Quoted:
Quoted:
bradpierson26: It seems that's the idea. I know I've personally wanted a grip for my scorp that wasn't printed on a 3D printer. Doesn't seem that they would be strong enough (even though I have heard otherwise). Agreed According to a post I read on another forum we might be waiting just a bit longer... |
|
Quoted:
C'mon man, link or specifics! Posted Via AR15.Com Mobile View Quote I didn't post a link due to being unsure if it was allowed. Decided to read through the CoC again and it seems that it is ok. From the CZ forums... http://www.czfirearms.us/index.php?topic=80867.0 Should give u all the info you need. My apologies for holding out... |
|
Quoted:
I didn't post a link due to being unsure if it was allowed. Decided to read through the CoC again and it seems that it is ok. From the CZ forums... http://www.czfirearms.us/index.php?topic=80867.0 Should give u all the info you need. My apologies for holding out... View Quote View All Quotes View All Quotes Quoted:
Quoted:
C'mon man, link or specifics! Posted Via AR15.Com Mobile I didn't post a link due to being unsure if it was allowed. Decided to read through the CoC again and it seems that it is ok. From the CZ forums... http://www.czfirearms.us/index.php?topic=80867.0 Should give u all the info you need. My apologies for holding out... Yeti posted pics of the switchback in the above linked thread with more information if you guys are interested. |
|
Quoted:
I REALLY like the stock, but I've got 3 questions. Will it lock closed with the stock in all positions, compressed and extended? Also, can it be fired with the stock folded? Finally, it looks like the cheek weld sits higher than the factory stock, any issues with seeing the irons? View Quote View All Quotes View All Quotes Quoted:
Quoted:
I got this Zhukov kit from Only the Best, and it's the TITS. Way better than the one I bought on Gunbroker a few months ago. Only the Best: Side Project LINK Adapter (CZ scoprion Zhukov) http://cdn6.bigcommerce.com/s-jekapo/products/556/images/5708/Screen_Shot_2016-04-21_at_7.01.30_AM__96651.1461236842.1280.1280.png?c=2 I REALLY like the stock, but I've got 3 questions. Will it lock closed with the stock in all positions, compressed and extended? Also, can it be fired with the stock folded? Finally, it looks like the cheek weld sits higher than the factory stock, any issues with seeing the irons? Sorry for the long delay. The stock will fold in all positions, but it does cover most of the ejection port. Will have to try it to know, but it does not look promising. If the shells eject upwards and outwards, it might work. Otherwise, no. As for cheek weld, it works fine for me with factory irons, but some guys complain about it. I think it might depend a lot on your facial shape / structure. But it fits me perfectly. The stock saddles up right against my cheekbone for a tight weld looking right down the factory irons. |
|
Quoted:
Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg Damn thats sweet looking. Hnng |
|
Quoted:
Quoted:
Quoted:Let me get that first batch out and maybe we can do a pre-order on a "bullnose UMP style" model and see if there is enough interest to do a run. Ok, I realize this is a horrible photoshop job--I was in a hurry. Please ignore the funky color/contrast/brightness differences of my frankenchop. In any event, here's my vision for my Scorpion, that I like to call the Evo 3 S2k. Full length manticore rail, mp5-style grip, chopped/textured molot VFG/handstop, and of course manticore's collapsible stock.... http://i34.photobucket.com/albums/d116/jekbrown/Evo%201%20S2k_zpshduryl1r.jpg Damn thats sweet looking. Hnng Any updates on this? |
|
Quoted:
According to a post I read on another forum we might be waiting just a bit longer... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
bradpierson26: It seems that's the idea. I know I've personally wanted a grip for my scorp that wasn't printed on a 3D printer. Doesn't seem that they would be strong enough (even though I have heard otherwise). Agreed According to a post I read on another forum we might be waiting just a bit longer... https://www.yetiwurks.com/products/yeti-wurks-switchback-grip |
|
View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
bradpierson26: It seems that's the idea. I know I've personally wanted a grip for my scorp that wasn't printed on a 3D printer. Doesn't seem that they would be strong enough (even though I have heard otherwise). Agreed According to a post I read on another forum we might be waiting just a bit longer... https://www.yetiwurks.com/products/yeti-wurks-switchback-grip Thank you. Although, I am hesitant to purchase I contacted him with a couple questions. I was just not happy at all with the construction/feel of the Matterhorn. I put the stock grip back on before I even fired it. I will most likely buy one regardless but, we'll see what he says. Thanks again |
|
|
Quoted:
Handguards coming out from Yeti and Manticore soon. I haven't heard anything more about other vendors entering the market. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Anything New Out there? Handguards coming out from Yeti and Manticore soon. I haven't heard anything more about other vendors entering the market. Everybody go to the Geissele forum in the industry tab and ask for a Geissele/ALG trigger |
|
Quoted:
Everybody go to the Geissele forum in the industry tab and ask for a Geissele/ALG trigger View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Anything New Out there? Handguards coming out from Yeti and Manticore soon. I haven't heard anything more about other vendors entering the market. Everybody go to the Geissele forum in the industry tab and ask for a Geissele/ALG trigger This! |
|
I just picked up my Scorpion in FDE and wasn't sure if the stock shown on their webstore is 922r compliant or not.
http://shop.cz-usa.com/ProductDetail/366313600703FDE_Evo-Fde-Stock-Complete I'm curious because they're stating other parts (like magazines) are 922r compliant. http://shop.cz-usa.com/ProductDetail/11350_Mag-Cz-Scorpion-9mm-30rd It doesn't make sense to me that they would sell it if it wasn't but... |
|
Quoted: I just picked up my Scorpion in FDE and wasn't sure if the stock shown on their webstore is 922r compliant or not. http://shop.cz-usa.com/ProductDetail/366313600703FDE_Evo-Fde-Stock-Complete I'm curious because they're stating other parts (like magazines) are 922r compliant. http://shop.cz-usa.com/ProductDetail/11350_Mag-Cz-Scorpion-9mm-30rd It doesn't make sense to me that they would sell it if it wasn't but... View Quote |
|
Quoted: I would love to find more mags at a decent price. View Quote $19.99 @ Prepper Gun Shop. https://www.preppergunshop.com/magazine-cz-scorpion-9mm-30rd Price went up and now OOS. |
|
Quoted:
AFAIK, the stocks are still imported. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I just picked up my Scorpion in FDE and wasn't sure if the stock shown on their webstore is 922r compliant or not. http://shop.cz-usa.com/ProductDetail/366313600703FDE_Evo-Fde-Stock-Complete I'm curious because they're stating other parts (like magazines) are 922r compliant. http://shop.cz-usa.com/ProductDetail/11350_Mag-Cz-Scorpion-9mm-30rd It doesn't make sense to me that they would sell it if it wasn't but... Thanks for the reply; there's plenty of parts I'm looking at swapping out in addition to SBR'ing it and I wanna make sure I do it right.... |
|
|
Quoted:
<a href="http://s131.photobucket.com/user/Dawg180/media/Manticore%20Scorpion.jpg.html" target="_blank">http://i131.photobucket.com/albums/p296/Dawg180/Manticore%20Scorpion.jpg</a> Manticore Scorpion EVO Trasnformer Forends are in stock! (Very first ones back from anodizing- they will sell out fast, but we have a LOT more in stock next week! ;) ) Sven Manticore Arms View Quote Sven, you are making me want to buy another EVO just to mod the hell out of and leave one as a clone. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.