User Panel
First to Fight.
If I am not on a watchlist, someone isn't doing their job. |
Originally Posted By HALFNATTYGAINZ:
Pretty awesome! How's it sound? View Quote View All Quotes View All Quotes Originally Posted By HALFNATTYGAINZ:
Originally Posted By TATBME:
Originally Posted By HALFNATTYGAINZ:
Originally Posted By bradpierson26:
$175 in cones, $80 in a tube, $80 in end caps ish. Cerakote, engraving, etc can add up though. Starting to look into this. This is too cool. Obviously this won't be on the same level as a dead air can but its half the price and its always cooler when you make it. The can is easy to build, if you have a drill press or know someone with one it's no problem. Here's my can and all the internals. I also have an Obsidian or form 4, but some firearms deserve their own can. <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpsmzzf4azq.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpsmzzf4azq.jpeg</a> <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpstnpha93q.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpstnpha93q.jpeg</a> Pretty awesome! How's it sound? Sounds damn good, first round pop and then it's quiet. The only way I would've been happier is a factory can, but I have to many firearms for all of them to have their own suppressor. ETA: I had some problems with POI at first, but I eventually figured out the problem. |
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
Originally Posted By Idaholandho:
Excellent. By need one, you meant need two View Quote View All Quotes View All Quotes Originally Posted By Idaholandho:
Originally Posted By JBecker_72:
Shot my friends SBR tonight. I need one now. Excellent. By need one, you meant need two Something like that. Seriously though, that thing ran so good. I'm buying one and a can. It has to be done. |
|
|
Originally Posted By TATBME:
The can is easy to build, if you have a drill press or know someone with one it's no problem. Here's my can and all the internals. I also have an Obsidian or form 4, but some firearms deserve their own can. <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpsmzzf4azq.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpsmzzf4azq.jpeg</a> <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpstnpha93q.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpstnpha93q.jpeg</a> View Quote View All Quotes View All Quotes Originally Posted By TATBME:
Originally Posted By HALFNATTYGAINZ:
Originally Posted By bradpierson26:
$175 in cones, $80 in a tube, $80 in end caps ish. Cerakote, engraving, etc can add up though. Starting to look into this. This is too cool. Obviously this won't be on the same level as a dead air can but its half the price and its always cooler when you make it. The can is easy to build, if you have a drill press or know someone with one it's no problem. Here's my can and all the internals. I also have an Obsidian or form 4, but some firearms deserve their own can. <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpsmzzf4azq.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpsmzzf4azq.jpeg</a> <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpstnpha93q.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpstnpha93q.jpeg</a> Nice work and if you ever need replacement baffles any autoparts store has you covered on the cheap. |
|
|
About suppressor: I bought a hybrid for mine--because it looked so cool in silencerco's marketing pics.
Also, for those who want an Omega 9k--sico opened up speq pricing for all ex mil for May, my price was $599 + tax, so about $640 OTD |
|
|
Order placed for a CZ from Palmetto and a 9K from AccuTac. And the clock begins.
|
|
|
|
Originally Posted By TATBME:
Sounds damn good, first round pop and then it's quiet. The only way I would've been happier is a factory can, but I have to many firearms for all of them to have their own suppressor. ETA: I had some problems with POI at first, but I eventually figured out the problem. View Quote View All Quotes View All Quotes Originally Posted By TATBME:
Originally Posted By HALFNATTYGAINZ:
Originally Posted By TATBME:
Originally Posted By HALFNATTYGAINZ:
Originally Posted By bradpierson26:
$175 in cones, $80 in a tube, $80 in end caps ish. Cerakote, engraving, etc can add up though. Starting to look into this. This is too cool. Obviously this won't be on the same level as a dead air can but its half the price and its always cooler when you make it. The can is easy to build, if you have a drill press or know someone with one it's no problem. Here's my can and all the internals. I also have an Obsidian or form 4, but some firearms deserve their own can. <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpsmzzf4azq.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpsmzzf4azq.jpeg</a> <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpstnpha93q.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpstnpha93q.jpeg</a> Pretty awesome! How's it sound? Sounds damn good, first round pop and then it's quiet. The only way I would've been happier is a factory can, but I have to many firearms for all of them to have their own suppressor. ETA: I had some problems with POI at first, but I eventually figured out the problem. I've shot TATBME's Evo with this can on it and all I remember hearing was the clickety-clack of the action. These homebrew cans may seem hokey (I certainly thought they were) but they are no joke when it comes to performance. I built a 22lr can with SD Tactical tube and endcaps, and it works like a charm. Shot it alongside a friend's Spectre II and only the first round pop was noticeably quieter with the Spectre II. |
|
Face up, make your stand, and realize you're living in the golden years.
|
Originally Posted By JBecker_72:
Something like that. Seriously though, that thing ran so good. I'm buying one and a can. It has to be done. View Quote View All Quotes View All Quotes Originally Posted By JBecker_72:
Originally Posted By Idaholandho:
Originally Posted By JBecker_72:
Shot my friends SBR tonight. I need one now. Excellent. By need one, you meant need two Something like that. Seriously though, that thing ran so good. I'm buying one and a can. It has to be done. I also was very happy with it . I was feeding it perfecta and had great results on paper . It needs a little stubby front grip , micro red dot then ......... |
|
|
Originally Posted By Idaholandho:
Excellent. By need one, you meant need two View Quote View All Quotes View All Quotes Originally Posted By Idaholandho:
Originally Posted By JBecker_72:
Shot my friends SBR tonight. I need one now. Excellent. By need one, you meant need two Indeed. That's how I roll. 2 = 1, 1 = none. |
|
|
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg View Quote No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. |
|
|
Originally Posted By Master_Blaster:
No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. Well shit. |
|
|
Originally Posted By mercdank:
Originally Posted By Master_Blaster:
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. Well shit. Mine is unfired (by me) and has a very similar chip in the exact same spot. I didn't expect it to be an issue. |
|
|
Originally Posted By Skep:
Mine is unfired (by me) and has a very similar chip in the exact same spot. I didn't expect it to be an issue. View Quote View All Quotes View All Quotes Originally Posted By Skep:
Originally Posted By mercdank:
Originally Posted By Master_Blaster:
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. Well shit. Mine is unfired (by me) and has a very similar chip in the exact same spot. I didn't expect it to be an issue. I have a chip there as well and I haven't shot mine yet. |
|
|
Originally Posted By Neomonk21:
I have a chip there as well and I haven't shot mine yet. View Quote View All Quotes View All Quotes Originally Posted By Neomonk21:
Originally Posted By Skep:
Originally Posted By mercdank:
Originally Posted By Master_Blaster:
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg No. The corner of that carrier is chipped. Definitely a weak point, but it should be designed so that it shouldn't happen. Contact CS about it. Well shit. Mine is unfired (by me) and has a very similar chip in the exact same spot. I didn't expect it to be an issue. I have a chip there as well and I haven't shot mine yet. Oookie dokie I'm gonna shoot it lol |
|
|
|
Originally Posted By 94tonka:
I also was very happy with it . I was feeding it perfecta and had great results on paper . It needs a little stubby front grip , micro red dot then ......... View Quote View All Quotes View All Quotes Originally Posted By 94tonka:
Originally Posted By JBecker_72:
Originally Posted By Idaholandho:
Originally Posted By JBecker_72:
Shot my friends SBR tonight. I need one now. Excellent. By need one, you meant need two Something like that. Seriously though, that thing ran so good. I'm buying one and a can. It has to be done. I also was very happy with it . I was feeding it perfecta and had great results on paper . It needs a little stubby front grip , micro red dot then ......... Hey I know you. |
|
|
Originally Posted By akumadiavolo:
Do it. Every scorpion I have ever seen has it, it is not a defect as some others seem to think. Mine with it since new has about 4K rounds down the pipe. View Quote View All Quotes View All Quotes Originally Posted By akumadiavolo:
Originally Posted By mercdank:
Oookie dokie I'm gonna shoot it lol Do it. Every scorpion I have ever seen has it, it is not a defect as some others seem to think. Mine with it since new has about 4K rounds down the pipe. Cool beans. |
|
|
Originally Posted By TATBME: Sounds damn good, first round pop and then it's quiet. The only way I would've been happier is a factory can, but I have to many firearms for all of them to have their own suppressor. ETA: I had some problems with POI at first, but I eventually figured out the problem. View Quote View All Quotes View All Quotes Originally Posted By TATBME: Originally Posted By HALFNATTYGAINZ: Originally Posted By TATBME: Originally Posted By HALFNATTYGAINZ: Originally Posted By bradpierson26: $175 in cones, $80 in a tube, $80 in end caps ish. Cerakote, engraving, etc can add up though. Starting to look into this. This is too cool. Obviously this won't be on the same level as a dead air can but its half the price and its always cooler when you make it. The can is easy to build, if you have a drill press or know someone with one it's no problem. Here's my can and all the internals. I also have an Obsidian or form 4, but some firearms deserve their own can. <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpsmzzf4azq.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpsmzzf4azq.jpeg</a> <a href="http://s1272.photobucket.com/user/TATBME/media/Mobile%20Uploads/image_zpstnpha93q.jpeg.html" target="_blank">http://i1272.photobucket.com/albums/y393/TATBME/Mobile%20Uploads/image_zpstnpha93q.jpeg</a> Pretty awesome! How's it sound? Sounds damn good, first round pop and then it's quiet. The only way I would've been happier is a factory can, but I have to many firearms for all of them to have their own suppressor. ETA: I had some problems with POI at first, but I eventually figured out the problem. Could you at the very least share the specs on the tube? I'm building a dedicated can for my Evo but it's gonna get welded on to make it a 1 stamp gun so I'm worried about concentricity and it being a good can for the gun. What was the source of your poi issues? Your can seems to be nice and short, but a good thickness unlike throwing a skinny pistol can on a rifle. |
|
|
Could you at the very least share the specs on the tube? I'm building a dedicated can for my Evo but it's gonna get welded on to make it a 1 stamp gun so I'm worried about concentricity and it being a good can for the gun. What was the source of your poi issues? Your can seems to be nice and short, but a good thickness unlike throwing a skinny pistol can on a rifle. View Quote IM sent |
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
|
Does anyone have a good case that will fit the sbr with folded stock? I'm looking for something discreet such as a laptop bag. I'd like something with straps inside to hold the rifle and possibly a side compartment for mags and suppressor.
|
|
|
Can someone post brass marks on their bolt?
I am seeing brass marks on the left (inside of the receiver). Haven't had failures to eject just can't account for while there would be brass marks there. |
|
FBHO
Team Ranstad |
The last time I looked in this thread was 4/29/2015 so exactly one year later here I am again. I should really commit to buying one of these!
|
|
"We're not making it harder to get government assistance, we're making it easier to get a job." Governor Walker
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
Originally Posted By robertmegar:
Amazon reviewer: View Quote View All Quotes View All Quotes Originally Posted By robertmegar:
Originally Posted By mdewitt71:
Originally Posted By akuser-47:
Originally Posted By robertmegar:
So what pouches work for the Scorpion mags? I may get the MPX triple retention pouch. I know about the tacos but looking what else is out there that works. I tried the 5.11 MP5 pouch and it sucks, too tight. Hard to beat these for their cost. I have 1 in OD need another still. MA37 MP7 condor mag pouch These fit the 30 round Scorpion mags? Will order me a couple set for sure if they do. Amazon reviewer: I just received this magazine pouch, other customers are correct about the fact that this pouch is intended for straight mags. That being said I was able to squeeze CZ scorpion magazines into the pouch, they are extremely tight, and I'm going to leave them in to see how it will break in since it has elastic bands to help with retention. As of now I would recommend this product for CZ scorpion mags, just be aware it will be a tight fit but I can't complain because of how cheap these are.
I will update this after I let the pouch break in, if any issues with how they fit arise. see less By Matt on January 2, 2016 There must be some manufacturing variances at play here because there's no way I'm getting Scorpion mags into these pouches that showed up yesterday. I manned up and after some wrangling, they do fit. It took a little time and effort but they will fit with some muscling. |
|
"You can't conquer a free man; the most you can do is kill him." -- Robert A. Heinlein
|
Originally Posted By stik87:
The last time I looked in this thread was 4/29/2015 so exactly one year later here I am again. I should really commit to buying one of these! View Quote It took me just over a year since when I first posted about wanting one. Now my F1 is pending, manticore has released a sweet stock, my subgun can is en route and accessories are piling up. I say do it |
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
Originally Posted By mercdank:
Haven't fired this yet, but I noticed the bolt has a small chip in it. Does this look ok to you guys? https://imgur.com/kzf6JoD.jpg View Quote I picked up my Scorpion a little over a week ago, and mine has the same "ding" on the corner of the bolt. It also has a corresponding shiny mark on the barrel "fixation insert". My scorpion has functioned perfectly for the 100 or so rounds I've put through it so far - and while I'm not worried about this, I will keep an eye on it. Bob S. |
|
|
Originally Posted By akumadiavolo:
Do it. Every scorpion I have ever seen has it, it is not a defect as some others seem to think. Mine with it since new has about 4K rounds down the pipe. View Quote View All Quotes View All Quotes Originally Posted By akumadiavolo:
Originally Posted By mercdank:
Oookie dokie I'm gonna shoot it lol Do it. Every scorpion I have ever seen has it, it is not a defect as some others seem to think. Mine with it since new has about 4K rounds down the pipe. I've got 2 EVO 3's, & neither of them have this chip defect. The corners probably should have a chamfer to mitigate this from happening, but it's a flaw no matter how often it occurs. I doubt the CAD files have this "feature" in the diagram. |
|
|
|
I'm sure it's been asked before and I did google but never got a clear answer. Doesn't CZ offer a mil/leo/firefighter discount? Who do I call at CZ to verify?
|
|
"We're not making it harder to get government assistance, we're making it easier to get a job." Governor Walker
|
Originally Posted By stik87:
I'm sure it's been asked before and I did google but never got a clear answer. Doesn't CZ offer a mil/leo/firefighter discount? Who do I call at CZ to verify? View Quote http://cz-usa.com/dealers/le-dealers/ http://cz-usa.com/company/contact ^ Bottom of that list has the LEO extension |
|
Archer: Cry "Havoc!" And let slip the hogs of war!
Lana: DOGS of war....... Archer: WHATEVER FARM ANIMAL OF WAR, LANA! Award 24/365: Most likely not to get an award. |
Originally Posted By akuser-47:
The condor mag pouch work they will be tight but if u flip the velcro outside each pouch it gives more space. flipped velcro <a href="http://s228.photobucket.com/user/akuser47/media/20160501_122804_zpsvovpg0ky.jpg.html" target="_blank">http://i228.photobucket.com/albums/ee97/akuser47/20160501_122804_zpsvovpg0ky.jpg</a> View Quote I set my purse down and made them fit. |
|
"You can't conquer a free man; the most you can do is kill him." -- Robert A. Heinlein
|
Originally Posted By Burnsy87: http://cz-usa.com/dealers/le-dealers/ http://cz-usa.com/company/contact ^ Bottom of that list has the LEO extension View Quote View All Quotes View All Quotes Originally Posted By Burnsy87: Originally Posted By stik87: I'm sure it's been asked before and I did google but never got a clear answer. Doesn't CZ offer a mil/leo/firefighter discount? Who do I call at CZ to verify? http://cz-usa.com/dealers/le-dealers/ http://cz-usa.com/company/contact ^ Bottom of that list has the LEO extension |
|
"We're not making it harder to get government assistance, we're making it easier to get a job." Governor Walker
|
Originally Posted By stik87:
The last time I looked in this thread was 4/29/2015 so exactly one year later here I am again. I should really commit to buying one of these! View Quote This thread pushed me over the edge.. I know your pain. Here you go: https://www.youtube.com/watch?v=ZXsQAXx_ao0 |
|
|
Originally Posted By Maynard:
I set my purse down and made them fit. View Quote View All Quotes View All Quotes Originally Posted By Maynard:
Originally Posted By akuser-47:
The condor mag pouch work they will be tight but if u flip the velcro outside each pouch it gives more space. flipped velcro <a href="http://s228.photobucket.com/user/akuser47/media/20160501_122804_zpsvovpg0ky.jpg.html" target="_blank">http://i228.photobucket.com/albums/ee97/akuser47/20160501_122804_zpsvovpg0ky.jpg</a> I set my purse down and made them fit. I pull them out and put them back into it often I'm hoping it will loosen up more in time. For the cost though they will serve there purpose no doubt. |
|
|
Just submitted my first Form 1 for a can; something I'd never thought i'd do. I plan on using my scorpion to test it at first.
This will be a pistol can mainly but I thought it might be cool to make it out of titanium and create it in a way so that I might be able to use it on a rifle too. Hopefully I can also design it so that it can accept wipes. I got plans for a few more cans too! Is there any company that is offering modular tubes? or would I be better off submitting a full sized stamp and a "K" stamp? |
|
|
I left this thread a while back for monetary reasons..... But I saw multiple scorpions at saxet gunshow in San Antonio today. Price was $750-799 and I believe they were original, the one I looked at did not appear to be a world model. In case anyone is worried about availability still.
I was at Capitol armory and they showed me the omega 9k on a 3 lug. Gonna have to buy that now for the scorp. |
|
|
Originally Posted By Master_Blaster:
I've got 2 EVO 3's, & neither of them have this chip defect. The corners probably should have a chamfer to mitigate this from happening, but it's a flaw no matter how often it occurs. I doubt the CAD files have this "feature" in the diagram. View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Originally Posted By akumadiavolo:
Originally Posted By mercdank:
Oookie dokie I'm gonna shoot it lol Do it. Every scorpion I have ever seen has it, it is not a defect as some others seem to think. Mine with it since new has about 4K rounds down the pipe. I've got 2 EVO 3's, & neither of them have this chip defect. The corners probably should have a chamfer to mitigate this from happening, but it's a flaw no matter how often it occurs. I doubt the CAD files have this "feature" in the diagram. Please post a pic of your clean bolts. I have seen about 2 dozen Scorpions and every single one has this, so I am genuinely curious. |
|
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
I shot 125 rounds today with no issues. I will post a pic of the bolt when I get around to cleaning it.
|
|
|
I'm eyeing up some of the SD tac "B" cell solvent tubes for my form 1 build.
Does anyone know if anyone has thread protectors for the 18x1 threads? Or would I have to get the 1/2x28 then get an adapter for the 18x1? Also are there any modular tubes out there yet? |
|
|
Originally Posted By HALFNATTYGAINZ: I'm eyeing up some of the SD tac "B" cell solvent tubes for my form 1 build. Does anyone know if anyone has thread protectors for the 18x1 threads? Or would I have to get the 1/2x28 then get an adapter for the 18x1? Also are there any modular tubes out there yet? View Quote Modular tubes are a bit of a gray legal area/no go for form 1 builders. And unless you want it to fit under an extended handguard, a wider tube like a D tube will give you more volume at a shorter length. I don't know of any 18x1 thread protectors out there besides the flash hider that came with the gun. If you have an existing can I can understand using an adapter but if this form 1 is going to be dedicated for the Scorpion you can source a 18x1 direct thread for your can, Big Waylon helped me. |
|
|
Originally Posted By HappyCamel:
Modular tubes are a bit of a gray legal area/no go for form 1 builders. And unless you want it to fit under an extended handguard, a wider tube like a D tube will give you more volume at a shorter length. I don't know of any 18x1 thread protectors out there besides the flash hider that came with the gun. If you have an existing can I can understand using an adapter but if this form 1 is going to be dedicated for the Scorpion you can source a 18x1 direct thread for your can, Big Waylon helped me. View Quote View All Quotes View All Quotes Originally Posted By HappyCamel:
Originally Posted By HALFNATTYGAINZ:
I'm eyeing up some of the SD tac "B" cell solvent tubes for my form 1 build. Does anyone know if anyone has thread protectors for the 18x1 threads? Or would I have to get the 1/2x28 then get an adapter for the 18x1? Also are there any modular tubes out there yet? Modular tubes are a bit of a gray legal area/no go for form 1 builders. And unless you want it to fit under an extended handguard, a wider tube like a D tube will give you more volume at a shorter length. I don't know of any 18x1 thread protectors out there besides the flash hider that came with the gun. If you have an existing can I can understand using an adapter but if this form 1 is going to be dedicated for the Scorpion you can source a 18x1 direct thread for your can, Big Waylon helped me. Interesting... That's why some other people weren't responding to my questions, lol. Thanks! I submitted a form 1 for an 8" can. Thinking I could use it for both pistol and rifle if I use mainly Ti components. I'll also be submitting a stamp for a "K" can. The K can will probably be D sized. The K can will most likely be mainly for the evo. However I'll probably use both my 8" can and my K can on my evo. |
|
|
I'm considering going the form 1 route with a DM aluminum kit with a 6" long 1.625" diameter tube. They have an 18x1 endcap for the aluminum and stainless kits; not titanium though.
|
|
|
Originally Posted By frankiebagadonuts: I'm considering going the form 1 route with a DM aluminum kit with a 6" long 1.625" diameter tube. They have an 18x1 endcap for the aluminum and stainless kits; not titanium though. View Quote I couldn't seem to find 18x1 anywhere on DMs site, how'd you find it? |
|
|
Originally Posted By HappyCamel:
I couldn't seem to find 18x1 anywhere on DMs site, how'd you find it? View Quote View All Quotes View All Quotes Originally Posted By HappyCamel:
Originally Posted By frankiebagadonuts:
I'm considering going the form 1 route with a DM aluminum kit with a 6" long 1.625" diameter tube. They have an 18x1 endcap for the aluminum and stainless kits; not titanium though. I couldn't seem to find 18x1 anywhere on DMs site, how'd you find it? You can order these parts without an approved form 1 correct? I know there's an answer out there somewhere but I assume I can order them, no problem. |
|
|
Originally Posted By HALFNATTYGAINZ:
You can order these parts without an approved form 1 correct? I know there's an answer out there somewhere but I assume I can order them, no problem. View Quote View All Quotes View All Quotes Originally Posted By HALFNATTYGAINZ:
Originally Posted By HappyCamel:
Originally Posted By frankiebagadonuts:
I'm considering going the form 1 route with a DM aluminum kit with a 6" long 1.625" diameter tube. They have an 18x1 endcap for the aluminum and stainless kits; not titanium though. I couldn't seem to find 18x1 anywhere on DMs site, how'd you find it? You can order these parts without an approved form 1 correct? I know there's an answer out there somewhere but I assume I can order them, no problem. I wouldn't drill holes but I have all my parts and my stamp is pending. Ymmv |
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
Originally Posted By HALFNATTYGAINZ:
You can order these parts without an approved form 1 correct? I know there's an answer out there somewhere but I assume I can order them, no problem. View Quote View All Quotes View All Quotes Originally Posted By HALFNATTYGAINZ:
Originally Posted By HappyCamel:
Originally Posted By frankiebagadonuts:
I'm considering going the form 1 route with a DM aluminum kit with a 6" long 1.625" diameter tube. They have an 18x1 endcap for the aluminum and stainless kits; not titanium though. I couldn't seem to find 18x1 anywhere on DMs site, how'd you find it? You can order these parts without an approved form 1 correct? I know there's an answer out there somewhere but I assume I can order them, no problem. You can order parts, but you cannot drill any holes until your form 1 is approved. |
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.