I've got 2 Rossis; both a 24" Rifle (yours is called a Short Rifle) and a
20" Carbine in 357mag and
they are slick shooting, strong actioned, fun guns. Navy Arms had Rossi make some nicer finished, walnut stocked versions so you got a good one. If, after shooting it, you
want to slick up your action and lighten up the trigger,
Steve's Gunz sells a DIY action kit and DvD for $58 which does a great job with the
rifle. I shows you how to reduce some of the spring pressures and smooth
out the action to make your rifle last longer and hold a couple more rds in the tube as well. In addition, his kit has both a
reduced power ejector spring so you won't be throwing you spent brass
into the next county and a steel mag follower to replace the plastic one Rossi uses.
I've done 3 action/trigger jobs using Steve's parts and Dvd on both of mine and a neighbor's and the job is easy and enjoyable to do as well as well worth your time. Rossi, like many manufactures these days, doesn't spend a bunch of time slicking up the innards and relies upon over springing the actions to make them function. This puts excess pressure on the actions and will result in excessive wear over time. Steve's DvD and parts shows you how to fix this simply.
The Rossi's Winchester '92 action is STRONG! You can load up 45 Colts at Ruger only levels and not even phase your rifle as they chamber the Rossis in 454 Casull. Besides strong, they are also pretty accurate to. If you want better sights, you can opt for a Marbles rear and 1/16" bead front sight to give you a finer sight picture or if you prefer, you can add a folding rear and tang sight (your tang is already threaded for the second hole for the sight) which both increases the sight radius by a lot and gives you an opportunity to use a small, .040" aperture which with increase your Depth of Field considerably.
I shoot my 158grn 357mag handloads through my rifle with a tang and globe front sight all the out to 300yds. An 8" plate at 200yds is simple to hit and a 6" plate at 100yds is simple too.