User Panel
User Panel
User Panel
|
Posted: 5/13/2015 8:35:32 AM EDT
[#1]
Quote HistoryQuoted:
Why $140. I figured it would be classified as a AR15 barrel and not one of the others. Quote HistoryQuoted:
Quoted:
140+shipping But it also saved me money on buying a 13.5x1 adapter Why $140. I figured it would be classified as a AR15 barrel and not one of the others. Yeah Im not sure why, thats what they told me via email for it. I think it does have to do with the piston assembly. |
|
|
|
Posted: 5/13/2015 8:37:28 AM EDT
[#2]
Quote HistoryQuoted:
? Price tag for that service ? Did you notice a difference in the blow back when suppressed? Did you remove piston before sending it in? Quote HistoryQuoted:
Quoted:
Had Adco cut the barrel down to 4.5" and finally tried it today. i only shot about 25 rounds but it cycled 115 fmj and 147 hollow points perfect. Half were suppressed the other half were unsuppressed. Also no baffle strikes. Had it threaded 1/2x28 and door to door only took 7 days. ? Price tag for that service ? Did you notice a difference in the blow back when suppressed? Did you remove piston before sending it in? As far as blowback goes I never fired it with the 8" barrel so I cant speak to that. No I didnt remove the piston. |
|
|
|
Posted: 5/13/2015 10:33:19 AM EDT
[#3]
Quote HistoryQuoted:
As far as blowback goes I never fired it with the 8" barrel so I cant speak to that. No I didnt remove the piston. Have any pictures? 
|
|
|
|
Posted: 5/13/2015 1:00:18 PM EDT
[#4]
Quote HistoryQuoted:
As far as blowback goes I never fired it with the 8" barrel so I cant speak to that. No I didnt remove the piston. Quote HistoryQuoted:
Quoted:
Quoted:
Had Adco cut the barrel down to 4.5" and finally tried it today. i only shot about 25 rounds but it cycled 115 fmj and 147 hollow points perfect. Half were suppressed the other half were unsuppressed. Also no baffle strikes. Had it threaded 1/2x28 and door to door only took 7 days. ? Price tag for that service ? Did you notice a difference in the blow back when suppressed? Did you remove piston before sending it in? As far as blowback goes I never fired it with the 8" barrel so I cant speak to that. No I didnt remove the piston. How's the blowback with the 4.5" barrel? What can? Thanks. |
|
|
|
Posted: 5/13/2015 1:36:41 PM EDT
[#5]
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel.
I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? 
|
|
|
|
Posted: 5/13/2015 1:49:06 PM EDT
[#6]
Quote HistoryQuoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Brass flakes? Or filler from cheap ammo, kinda like corn meal? |
|
|
|
Posted: 5/13/2015 1:55:58 PM EDT
[#7]
I see that the S3G and B.A.D. selector levers are confirmed working in the MPX, what about other AR parts? B.A.D. Enhanced Pins, charging handle, etc?
|
|
|
|
Posted: 5/13/2015 1:57:34 PM EDT
[#8]
Quote HistoryQuoted:
Brass flakes? Or filler from cheap ammo, kinda like corn meal? Quote HistoryQuoted:
Quoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Brass flakes? Or filler from cheap ammo, kinda like corn meal? It was 115 wwb and some cheap 147 Remington subs. Ill have to look tonight. |
|
|
|
Posted: 5/13/2015 4:19:17 PM EDT
[#9]
Quote HistoryQuoted:
It was 115 wwb and some cheap 147 Remington subs. Ill have to look tonight. Quote HistoryQuoted:
Quoted:
Quoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Brass flakes? Or filler from cheap ammo, kinda like corn meal? It was 115 wwb and some cheap 147 Remington subs. Ill have to look tonight. Yeah thats from the wwb 115s. I've seen those on other hosts. Haven't ran that crap through my mpx. Only 147's and 158's haven't noticed flakes but powder caked on from high back pressure of a few thousand rounds all around my chamber. Also found the firing pin housing gets full of crap after 3k rounds. Didn't clean it the first three range trips and then took apart the bolt and wow... Total crud. |
|
|
|
Posted: 5/13/2015 4:19:55 PM EDT
[#10]
Quote HistoryQuoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Pic with handgaurd on? Odd ball question but do you have a scale by chance and can give the weight of the new cut barrel? Interested to see how much weight we can take off this heavy gun. |
|
|
|
Posted: 5/14/2015 9:39:19 AM EDT
[#11]
Quote HistoryQuoted:
Pic with handgaurd on? Odd ball question but do you have a scale by chance and can give the weight of the new cut barrel? Interested to see how much weight we can take off this heavy gun. Quote HistoryQuoted:
Quoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Pic with handgaurd on? Odd ball question but do you have a scale by chance and can give the weight of the new cut barrel? Interested to see how much weight we can take off this heavy gun. I'm curious what the ID of the handguard is, and whether or not a QD can will fit inside it with the shortened barrel 
This thread is making it awful tempting to skip the Evo and go for the MPX... I could make some money on the Evo mags I have to help offset the cost difference 
|
|
|
|
Posted: 5/14/2015 10:18:15 AM EDT
[#12]
Quote HistoryQuoted:
I'm curious what the ID of the handguard is, and whether or not a QD can will fit inside it with the shortened barrel
This thread is making it awful tempting to skip the Evo and go for the MPX... I could make some money on the Evo mags I have to help offset the cost difference Quote HistoryQuoted:
Quoted:
Quoted:
I dont remember noticing any issues but that wasnt my main concern. The main thing I was worried about was whether or not it would run good with the shortened barrel. I did take a quick look down the bore this morning and it looked pretty clean, the only thing that caught my eye were the gold colored particles scattered throughout the chamber and receivers..... Not bad but noticeable....Is that something you guys that have fired yours have noticed? http://i1287.photobucket.com/albums/a623/browning43/Mobile%20Uploads/image_zpsnaxwyasy.jpg Pic with handgaurd on? Odd ball question but do you have a scale by chance and can give the weight of the new cut barrel? Interested to see how much weight we can take off this heavy gun. I'm curious what the ID of the handguard is, and whether or not a QD can will fit inside it with the shortened barrel
This thread is making it awful tempting to skip the Evo and go for the MPX... I could make some money on the Evo mags I have to help offset the cost difference My 9S fits fine(1.38" OD) and I'll be using a 3-lug on it soon when TROS ships my 3-lug adapter. Might have to go ahead and get my barrel chopped since it appears to work without much issue. I'm glad I skipped the Evo personally. It was tempting though. |
|
|
|
Posted: 5/15/2015 5:21:22 AM EDT
[#13]
Anybody try running an MPX with an rdias?
|
|
|
|
Posted: 5/15/2015 8:52:34 AM EDT
[#14]
Quote HistoryQuoted:
Anybody try running an MPX with an rdias? Nothing to trip the sear on a standard DIAS |
|
|
|
Posted: 5/15/2015 11:08:50 PM EDT
[#15]
Quote HistoryQuoted:
Nothing to trip the sear on a standard DIAS Quote HistoryQuoted:
Quoted:
Anybody try running an MPX with an rdias? Nothing to trip the sear on a standard DIAS 
Not my picture. From googling it seems that a sear trip fits on the notches on the carrier. Maybe the MPX sear trip is similar to the CMMG 22LR sear trip for their 22LR bolts? |
|
|
|
Posted: 5/16/2015 9:21:19 AM EDT
[#16]
Quote HistoryQuoted:
http://img.photobucket.com/albums/v625/akethan/DSC00344_zpszksyngqt.jpg Not my picture. From googling it seems that a sear trip fits on the notches on the carrier. Maybe the MPX sear trip is similar to the CMMG 22LR sear trip for their 22LR bolts? Quote HistoryQuoted:
Quoted:
Quoted:
Anybody try running an MPX with an rdias? Nothing to trip the sear on a standard DIAS http://img.photobucket.com/albums/v625/akethan/DSC00344_zpszksyngqt.jpg Not my picture. From googling it seems that a sear trip fits on the notches on the carrier. Maybe the MPX sear trip is similar to the CMMG 22LR sear trip for their 22LR bolts? That pics from afcom... This thread in our forum |
|
|
|
Posted: 5/16/2015 1:48:14 PM EDT
[#17]
The ACE should work just fine. I just received my ACE Ultra Light Entry Length stock.
The issue is the buffer tube I received with my stock is not round, so I can't install it. 
The threads will not engage with the folding stock adapter. I sent an email to ACE and am waiting for a reply. I'm sure that with some heat and the right amount of clamping force that I could get this tube to work, but for $105 I shouldn't have to. As a temporary solutions, I tried to install the butt stock on the existing MPX buffer tube but the diameter of the MPX tube is too large for the ACE butt stock. This stock is very light and will serve well in this application. However, for the price, the fit and finish are not the best. The supplied rubber recoil pad does not line-up well with the shoulder plate on the stock. The buffer tube is a high-gloss black, where I feel a matt finish would be a better fit for an AR type stock. Luckily the foam over tube covers most of the buffer tube. Hopefully I will receive a replacement buffer tube from ACE by the time my Form 1 is approved. Then another 3 months or so before my Ti-RANT 9 is released from NFA jail. btw, the stock in the above photo is NOT attached to the MPX, it is simply sitting next to the MPX. You can clearly see in the 2nd photo that the threads are not engaged. |
|
|
|
Posted: 5/16/2015 2:05:58 PM EDT
[#18]
Looks like Top Gun has these and with free shipping this weekend. Use promo code ship4free
http://www.topgunsupply.com/catalog/category/view/s/sig-sauer-mpx/id/1988/ |
|
|
|
Posted: 5/16/2015 10:01:52 PM EDT
[#19]
Quote HistoryQuoted:
The ACE should work just fine. I just received my ACE Ultra Light Entry Length stock. https://dl-web.dropbox.com/get/Public/2015-05-16.12.16.09.jpg?_subject_uid=76381847&w=AADHHnTs66yZf966M_gfgks5R1QeNIpAQ7hGQ9Og6u8l6w https://dl-web.dropbox.com/get/Public/2015-05-16.12.14.04.jpg?_subject_uid=76381847&w=AABiwNn7eKYLe0cJ7QucA5r0JTbEJA0hj4EuXMR3JB01Ew The issue is the buffer tube I received with my stock is not round, so I can't install it. https://dl-web.dropbox.com/get/Public/2015-05-16.12.15.05.jpg?_subject_uid=76381847&w=AAADgO9cOC-LYUv8dio8FMp9E3RenrvWMUrXms1HjczOOQ The threads will not engage with the folding stock adapter. I sent an email to ACE and am waiting for a reply. I'm sure that with some heat and the right amount of clamping force that I could get this tube to work, but for $105 I shouldn't have to. As a temporary solutions, I tried to install the butt stock on the existing MPX buffer tube but the diameter of the MPX tube is too large for the ACE butt stock. This stock is very light and will serve well in this application. However, for the price, the fit and finish are not the best. The supplied rubber recoil pad does not line-up well with the shoulder plate on the stock. The buffer tube is a high-gloss black, where I feel a matt finish would be a better fit for an AR type stock. Luckily the foam over tube covers most of the buffer tube. Hopefully I will receive a replacement buffer tube from ACE by the time my Form 1 is approved. Then another 3 months or so before my Ti-RANT 9 is released from NFA jail. Thank you for the heads up on this. Disappointed to hear that about the ACE stock. It would be so perfect for this application. |
|
|
|
Posted: 5/21/2015 2:28:37 PM EDT
[#20]
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 |
|
|
|
Posted: 5/21/2015 2:35:14 PM EDT
[#21]
Quote HistoryQuoted:
http://img.photobucket.com/albums/v625/akethan/DSC00344_zpszksyngqt.jpg Not my picture. From googling it seems that a sear trip fits on the notches on the carrier. Maybe the MPX sear trip is similar to the CMMG 22LR sear trip for their 22LR bolts? Quote HistoryQuoted:
Quoted:
Quoted:
Anybody try running an MPX with an rdias? Nothing to trip the sear on a standard DIAS http://img.photobucket.com/albums/v625/akethan/DSC00344_zpszksyngqt.jpg Not my picture. From googling it seems that a sear trip fits on the notches on the carrier. Maybe the MPX sear trip is similar to the CMMG 22LR sear trip for their 22LR bolts? No really? That's my pic. |
|
|
|
Posted: 5/21/2015 3:02:55 PM EDT
[#22]
Quote HistoryQuoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 I'll pass. Make a short gun extremely long. |
|
|
|
Posted: 5/21/2015 4:16:47 PM EDT
[#23]
Quote HistoryQuoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... |
|
|
|
Posted: 5/21/2015 4:19:51 PM EDT
[#24]
Quote HistoryQuoted:
So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... Quote HistoryQuoted:
Quoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... No. Unless thats a factory SBR or F1 gun. |
|
|
|
Posted: 5/21/2015 4:53:25 PM EDT
[#25]
Quote HistoryQuoted:
No. Unless thats a factory SBR or F1 gun. Quote HistoryQuoted:
Quoted:
Quoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... No. Unless thats a factory SBR or F1 gun. So his photos in the ad are illegal.... |
|
|
|
Posted: 5/21/2015 4:57:18 PM EDT
[#26]
Quote HistoryQuoted:
I'll pass. Make a short gun extremely long. Quote HistoryQuoted:
Quoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 I'll pass. Make a short gun extremely long. And no earthly idea how the price has already climbed to $484. You can call sig and order a collapsable MPX stock for much much less. crazy |
|
|
|
Posted: 5/21/2015 5:48:45 PM EDT
[#27]
Quote HistoryQuoted:
So his photos in the ad are illegal.... Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... No. Unless thats a factory SBR or F1 gun. So his photos in the ad are illegal.... My thoughts exactly. Not a smart fellar there. |
|
|
|
Posted: 5/21/2015 5:51:14 PM EDT
[#28]
Quote HistoryQuoted:
My thoughts exactly. Not a smart fellar there. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
There is a person on Gunbroker selling stocks for the MPX; kind of pricey though. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=484774808 So wait? A dealer is allowed to fabricate and then attach said stock to a factory pistol for a photo op and then take it off and the pistol is never classified as an SBR ? How does that work..... No. Unless thats a factory SBR or F1 gun. So his photos in the ad are illegal.... My thoughts exactly. Not a smart fellar there. Yeah, I can't comment on whether or not that is a factory SBR or F1, but my guess is no... |
|
|
|
Posted: 5/21/2015 6:42:28 PM EDT
[#29]
Quote HistoryQuoted:
Yeah, I can't comment on whether or not that is a factory SBR or F1, but my guess is no... Quote HistoryQuoted:
Quoted:
Quoted:
... So his photos in the ad are illegal.... My thoughts exactly. Not a smart fellar there. Yeah, I can't comment on whether or not that is a factory SBR or F1, but my guess is no... Glanced over on nfa tracker and based on the first shipment no F1 could have cleared yet. That would be <40 days. And since he "made" the stock. It did not come SBR. Otherwise the f3 for dealer would have magically cleared... That and he is selling off the part of the SBR before the form 4 happens.... Which isn't legal... So he derped. |
|
|
|
Posted: 5/21/2015 11:05:42 PM EDT
[#30]
Quote HistoryQuoted:
Glanced over on nfa tracker and based on the first shipment no F1 could have cleared yet. That would be <40 days. And since he "made" the stock. It did not come SBR. Otherwise the f3 for dealer would have magically cleared... That and he is selling off the part of the SBR before the form 4 happens.... Which isn't legal... So he derped. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
... So his photos in the ad are illegal.... My thoughts exactly. Not a smart fellar there. Yeah, I can't comment on whether or not that is a factory SBR or F1, but my guess is no... Glanced over on nfa tracker and based on the first shipment no F1 could have cleared yet. That would be <40 days. And since he "made" the stock. It did not come SBR. Otherwise the f3 for dealer would have magically cleared... That and he is selling off the part of the SBR before the form 4 happens.... Which isn't legal... So he derped. He is likely a SOT who bought the pistol. He can put a stock on and file the form 2 for SBR after. |
|
|
|
Posted: 5/22/2015 12:05:14 AM EDT
[#31]
Should've had a NFA disclaimer on the legalities of putting the stock on.
|
|
|
|
Posted: 5/22/2015 9:33:40 AM EDT
[#32]
Bidding is up to 505 for that.
|
|
|
|
Posted: 5/22/2015 11:09:57 AM EDT
[#33]
The bidder must be someone that doesnt look at this website
|
|
|
|
Posted: 5/22/2015 11:15:36 AM EDT
[#34]
Quote HistoryQuoted:
The bidder must be someone that doesnt look at this website Or an ATF Agent......
|
|
|
|
Posted: 5/22/2015 2:54:35 PM EDT
[#35]
Quote HistoryQuoted:
Or an ATF Agent...... Quote HistoryQuoted:
Quoted:
The bidder must be someone that doesnt look at this website Or an ATF Agent...... 
Up to 550 now. |
|
|
|
Posted: 5/22/2015 3:56:46 PM EDT
[#36]
Why wouldnt you just buy the sig brace version if you eventually planned on a SBR using an ar15 type stock
|
|
|
|
Posted: 5/22/2015 4:16:20 PM EDT
[#37]
Quote HistoryQuoted:
Why wouldnt you just buy the sig brace version if you eventually planned on a SBR using an ar15 type stock You fool! Don't you understand that it would allow you to use any! I mean ANY buffer tube/stock combo of your choice.... And it folds! Why would anyone want the ability to choose their stock! Why would you want to save over 500$ on after market parts.... 
Honestly though... Its like buying a pre built computer from Kmart blue light special. |
|
|
|
Posted: 5/22/2015 5:44:30 PM EDT
[#38]
 
4" barrel I've been running |
|
|
|
Posted: 5/22/2015 5:54:47 PM EDT
[#39]
Quote HistoryBadass! Any issues yet? I imagine you didn't change the gas port size? |
|
|
|
Posted: 5/23/2015 7:31:13 PM EDT
[#40]
Local shop got some in the other day...............I cant decide whether to Fo or wait for the SBR or the carbine............this one has the brace
|
|
|
|
Posted: 5/23/2015 8:19:06 PM EDT
[#41]
Quote HistoryQuoted:
Badass! Any issues yet? I imagine you didn't change the gas port size? Quote HistoryQuoted:
Badass! Any issues yet? I imagine you didn't change the gas port size? No changing to the piston. I did find that it will short stroke the S3G trigger after about 1600 rounds due to the dirty BCG. I don't think there are to many who shot that much. Umm I've tried 124,115,147,158 ppu and Focchi and they all cycle it unsuppressed when the guns cleaner. (I wouldn't run the 4" with handguard unless your suppressed! Otherwise it blasts your forward hand) well I haven't left my hand there to find out how it feels. What other details you want. Work was done by ACDO. |
|
|
|
Posted: 5/23/2015 11:42:04 PM EDT
[#42]
|
|
|
|
Posted: 5/24/2015 12:42:51 AM EDT
[#43]
Quote HistoryNice It cant look any better than this. |
|
|
|
Posted: 5/24/2015 8:34:34 AM EDT
[#44]
Quote HistoryQuoted:
Nice It cant look any better than this. Quote HistoryQuoted:
Nice It cant look any better than this. I bet it will when his form 1 clears! |
|
|
|
Posted: 5/24/2015 4:20:26 PM EDT
[#45]
Top Secret...What suppressor are you using and what length barrel?
|
|
|
|
Posted: 5/24/2015 6:15:57 PM EDT
[#46]
4.5" with a AAC Tirant 9S
Posted Via AR15.Com Mobile |
|
|
|
Posted: 5/25/2015 11:56:30 PM EDT
[#47]
<removed>
Please place all for sale items in the EE ~ TCBA_Joe |
|
|
|
Posted: 5/26/2015 12:13:39 AM EDT
[#48]
Quote HistoryQuoted:
<removed> Quoting above sales violation ~TCBA_Joe Not allowed here. Post it in the Equipment Exchange. Big orange button in the top right of your screen. |
|
|
|
Posted: 5/26/2015 7:01:19 PM EDT
[#49]
What a beauty! Can't wait for the mpx-k to come out.
|
|
|
|
Posted: 5/26/2015 9:02:51 PM EDT
[#50]
Quote HistoryQuoted:
4.5" with a AAC Tirant 9S Posted Via AR15.Com Mobile Top, have you had to clean the firing pin housing area where the spring is yet? I was noticing some of the casings had lighter primer strikes from my most recent range trip. I pulled that out and the spring for the firing pin had a solid cake of build up between the coils preventing full compression. I hadn't cleaned that spring since ~2k round mark and was curious if yours had any deposits of carbon there? Seems like an odd place for excess canon fouling. (Granted I should't be so lazy when cleaning the bolt. ) |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
