User Panel
I just came home from work for lunch to check the mail. I'm ripping open the box of media now!!
Hopefully I'll have some bling goin on tonight. |
|
|
Originally Posted By PapaGeno21:
The only problem is there will be no way to attach the paddles to the drums. You will see what I mean when you get one! I personally do not mind the 4 hour tumble time, I am sleeping while its working! From talking to other people it seems running it then letting it sit for a while, if you run it again for a bit before you empty will work good. So what I have been doing is I go to bed at 1AM, so the tumbler runs from 1-4:30am, then I wake up at 10am so the tumbler kicks back on at 930am. I wake up, shut it off and empty them out. Total tumble time is 4 hours. Ive got a good 1000 pieces of different pistol brass all in line to be tumbled this weekend. Attach a timer with multiple on/off settings, program however you care. |
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
Guys, what's my best option for tumbling media? I picked up one of the single drum tumblers the other day. So, I only need 1lb of media right?
I was going to order from Buffalo Arms since they let you get it by the pound. I was gonna pick up 2lbs, but shipping was about the same cost as the media itself. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By Col_Cotton_Hill: Here's my first batch. I just bought this brass. It was cleaned and polished when I bought it. I thought it all ready looked good. But man,,,,you can tell a difference. This was 3 1/2 hour's. Now I need to size and trim it and hit it again. How long do you guy's think I should let it run to debur it from trimming. Wet tumbled on the left. As I bought them, dry tumbled on the right. http://i479.photobucket.com/albums/rr153/Col_Cotton_Hill/reloading%20stuff/brassprep004_zps4d12d456.jpg Welcome to the bling club. After sizing, I tumble off lube with plain corn cob. Why I kept some of my dry tumblers. Only takes 1/2 hour, no drying. My trimmer deburs when I trim, so can't answer that question.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Well, not quite on the cheap, but I just ordered a Thumlers tumbler model B kit with the SS media for like 230.00. I've had a few bad expereinces with HF. If it's something I plan on using through My retirement, I splurge for the good stuff and take care of it.
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By ChevelleDave: Well, not quite on the cheap, but I just ordered a Thumlers tumbler model B kit with the SS media for like 230.00. I've had a few bad expereinces with HF. If it's something I plan on using through My retirement, I splurge for the good stuff and take care of it. You want to post in this thread; http://www.ar15.com/forums/t_6_42/344832_Wet_tumbling_with_SS_media__lots_of_pics__New_info_second_post_1_18_2012_.html |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Buffalo Arms - 2/17/2013 to 2/27/13 delivered today!
Originally Posted By olivers_AR:
Fedex dropped off the HF tumbler today. Media is slated for 2/28. Originally Posted By olivers_AR:
Ordered one for $49 shipped. On Sale and coupon code for 20% off. Media is next. ETA: Buffalo Arms - 5 lbs ordered - Appear to be 5 days behind on shipping according to webpage. Now the wait begins |
|
Proud Member of Team Ranstad
NRA Life Member USPSA Member |
I ordered from Buffalo arms for 2 pounds last monday, and it sat in their system pending for 3 days without action. Since I was paying almost as much for shipping, i cancelled, and joined a local group buy where I got 2 pounds for 17 shipped.
|
|
|
pick up one yesterday. ran some brass last night.. WOW.. It cleaned up my sub 300blk casings to almost spotless.
I guess im going to STM tonight to get a big one ordered now.. Looks like time to sell the the vibrators or convert them to moly.. |
|
Blah blah blah..
|
Has anybody tried a PVC pipe on the HF dual to get more capacity?
|
|
NRA Legacy Lifetime Member
Member Sand Springs Sportsmans Club |
Harbor Freight has said item on sale for $49.95.
Just ordered two. |
|
|
Originally Posted By beakerello: Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea |
|
|
Originally Posted By morpheus6d9:
Originally Posted By beakerello:
Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea Interesting, I hope someone tries this and posts the results. I'm good at copying but not design and fabrication. |
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By morpheus6d9: Originally Posted By beakerello: Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea You are in the wrong thread. 3 seperate wet tumbling threads running right now. This is the home built thread. Then there is the Thumbler model B thread.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By dryflash3:
Originally Posted By morpheus6d9:
Originally Posted By beakerello:
Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea You are in the wrong thread. 3 seperate wet tumbling threads running right now. I think he is in the right thread. I understood his post as removing the 2 drums and replacing them with 1 pvc drum - gaining the area that the bottoms of the 2 drums waste. I am interested in this as well. Or can we only talk about modifications in the homebuilt thread? |
|
|
Originally Posted By echofivekilo:
Guys, what's my best option for tumbling media? I picked up one of the single drum tumblers the other day. So, I only need 1lb of media right? I was going to order from Buffalo Arms since they let you get it by the pound. I was gonna pick up 2lbs, but shipping was about the same cost as the media itself. Go ahead and get 5 pounds, it's not a very large volume. Then, you have options; either another HF tumbler or two, or a larger tumbler. |
|
|
Originally Posted By AeroE:
Originally Posted By echofivekilo:
Guys, what's my best option for tumbling media? I picked up one of the single drum tumblers the other day. So, I only need 1lb of media right? I was going to order from Buffalo Arms since they let you get it by the pound. I was gonna pick up 2lbs, but shipping was about the same cost as the media itself. Go ahead and get 5 pounds, it's not a very large volume. Then, you have options; either another HF tumbler or two, or a larger tumbler. Thanks. That's what I ended up doing. A few of my buddies may get into wet tumbling too, so I can always sell them the extra for my cost plus a share of what shipping cost me. In related news, I got a shipping notification, so I should be up and running this weekend. |
|
|
Just wanted to come here and say that I followed this thread from close to the beginning and picked up a HF dual drum tumbler and media from Buffalo Arms. This thread pushed me into wet tumbling and I love it.
Thanks! |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By natethegreat: Sorry, go ahead. Guess I didn't read post I quoted close enough.Originally Posted By dryflash3: Originally Posted By morpheus6d9: Originally Posted By beakerello: Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea You are in the wrong thread. 3 seperate wet tumbling threads running right now. I think he is in the right thread. I understood his post as removing the 2 drums and replacing them with 1 pvc drum - gaining the area that the bottoms of the 2 drums waste. I am interested in this as well. Or can we only talk about modifications in the homebuilt thread? |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Just got one, plenty of bling, and media seperated it and got most of the water out and it and came out fine. Only lesson learned was that the sliver turning rods need to be lubed, only had gun oil to use
Would be interested in seeing about a single PVC pipe, would you need to put paddles in it? Originally Posted By dryflash3:
Originally Posted By natethegreat:
Sorry, go ahead. Guess I didn't read post I quoted close enough.
Originally Posted By dryflash3:
Originally Posted By morpheus6d9:
Originally Posted By beakerello:
Has anybody tried a PVC pipe on the HF dual to get more capacity? ive been thinking about that idea You are in the wrong thread. 3 seperate wet tumbling threads running right now. I think he is in the right thread. I understood his post as removing the 2 drums and replacing them with 1 pvc drum - gaining the area that the bottoms of the 2 drums waste. I am interested in this as well. Or can we only talk about modifications in the homebuilt thread? |
|
Proud Member of Team Ranstad
NRA Life Member USPSA Member |
Anyone have a suggestion for a good on/off timer that can store multiple times. Was thinking of on for 30 off for 10 on for 30 etc. I do this with my rotating media seperator w/o the SS media now. Just tumble by hand for 2 mins soak for 5. Anyways if there is an affordable timer out there that you can set 5+ on/off times please post it.
Edit: Found this one! ordered it and will update this weekend. I should have all of my stuff by friday to give this wet tumbling a shot. |
|
|
Originally Posted By olivers_AR:
Just got one, plenty of bling, and media seperated it and got most of the water out and it and came out fine. Only lesson learned was that the sliver turning rods need to be lubed, only had gun oil to use I was in Harbor Freight last week and took a look at that tumbler and didn't like the idea of the 2 small rubber containers and my first thought was "I wonder if I could make 1 PVC tube to replace them and gain some volume?" Consider this a TAG |
|
Μολὼν λαβέ
|
Forgot to ask.
Anyone tried using the lemi-shine / citric acid w/o the SS rod media? I did some tests with dish soap, lemon juice and water and tumbled them in a rotarty media seperator and it cleaned them up pretty good. I just tumbled them for a couple minutes and let them sit for 5, repeated this for 30 minutes or so. Just wondering if anyone has run a load w/o the SS rods and had good results. Mainly asking for once fired fairly clean stuff to save time on seperating out the media. I will experiment with it this weekend as I don't think my buffalo arms order will be here by then as I thought it would. |
|
|
Ppl probably know this but there's a guy on the EE selling XL length SS pins. Fast ship, under $50 bucks shipped to your door.
|
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By Optimal65G: Forgot to ask. Anyone tried using the lemi-shine / citric acid w/o the SS rod media? I did some tests with dish soap, lemon juice and water and tumbled them in a rotarty media seperator and it cleaned them up pretty good. I just tumbled them for a couple minutes and let them sit for 5, repeated this for 30 minutes or so. Just wondering if anyone has run a load w/o the SS rods and had good results. Mainly asking for once fired fairly clean stuff to save time on seperating out the media. I will experiment with it this weekend as I don't think my buffalo arms order will be here by then as I thought it would. A soak in Lemishine and Dawn will clean cases, some will still have dark splotches. None of the cases will have the bling. Get some SS pins or just do a soak in Lemishine without tumbling.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
What is the length of the two drums combined? What is the diameter of the drums?
|
|
NRA Legacy Lifetime Member
Member Sand Springs Sportsmans Club |
|
Thank you , Col_Cotton_Hill
|
|
NRA Legacy Lifetime Member
Member Sand Springs Sportsmans Club |
can u tell me the ratio for the wet ss brass tumblers? water/ brass/ pins? I am going to try a cement mixer from harbor fright . A 145 bucks, plus pins and some spray on bed liner for the drum, not too costly
|
|
|
What do you guy's think about using the larger pin's that the guy in the EE is selling. I know I do get a lot of double's stuck in my primer pocket's.
Have any of tried them. Do they work just as well. |
|
|
going to try to make the harbor fright $149 unit wrok, Going to remove the mixing blades from inside the drum, then install 5 ribs made from 1.5 inch thick UMHW then coat the inside of the drum with spray on bed liner. hope it works.
|
|
|
Originally Posted By Col_Cotton_Hill:
What do you guy's think about using the larger pin's that the guy in the EE is selling. I know I do get a lot of double's stuck in my primer pocket's. Have any of tried them. Do they work just as well. I've tumbled several thousand each of 9mm, .45, 5.56 and .40 using the larger diamter pins and have never had any pins stuck in flash holes. |
|
"It is not how these officers died that made them heroes; it is how they lived" - National Law Enforcement Officers Memorial
|
Originally Posted By tenex:
Originally Posted By Col_Cotton_Hill:
What do you guy's think about using the larger pin's that the guy in the EE is selling. I know I do get a lot of double's stuck in my primer pocket's. Have any of tried them. Do they work just as well. I've tumbled several thousand each of 9mm, .45, 5.56 and .40 using the larger diamter pins and have never had any pins stuck in flash holes. This has been my experience with .223 also. They are fantastic! |
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
So they work just as good on the primer pocket's ??
|
|
|
Picked up one of these tumblers ran a small batch of .40 it's clean but not super shiny like some of these pics I have seen.
Also the drums are very small I am building a single drum for it will post up info once I have it done. |
|
|
Originally Posted By beakerello:
Has anybody tried a PVC pipe on the HF dual to get more capacity? I am building one now. |
|
|
Just curious, with pvc what would you gain? 1/2" of space? the 6lb weight limit seems more limitting than the stock drum space. Unless you overload it; 2lb brass, media, and water each is max and that will not fill them up with brass by a long ways. Maybe you all are using less water and more brass? I was going to try 1/2 as much water and double the brass and see how that works. I still have lots of old black stuff to clean.
Has anyone overloaded this and run it for extended periods? results? I just ran my first batch today and MAN this works great. For ~75 bucks to get everything, this cant be beat. I plan to clean up all my old stuff(lot of old pickup I have been saving) then just use normal vibrating between reloads. For the first cleaning though, wow what a difference. I did put 8x .50 cal in a cylinder and it cleaned them up like new in 8 hrs. I used some real old black ones. Great thread OP and everyone who has contributed. |
|
|
Originally Posted By Col_Cotton_Hill:
So they work just as good on the primer pocket's ?? Yes. |
|
"It is not how these officers died that made them heroes; it is how they lived" - National Law Enforcement Officers Memorial
|
Anyone having trouble breaking the bands on them? If so, what do you use to replace em?
|
|
|
I haven't personally done it yet, but apparently the common fix is to use a vacuum cleaner belt as a replacement.
I'm sure someone has more info on the length, brand ect that they used. Originally Posted By deuc224: Anyone having trouble breaking the bands on them? If so, what do you use to replace em? |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By tenex: Originally Posted By Col_Cotton_Hill: So they work just as good on the primer pocket's ?? Yes. Only if you decap cases before tumbling. A universal decapper is used, as a sizing die would get scratched running dirty cases through it. Universal decapper has a large interior so case does not come into contact with the inside of the die, only the decapping pin.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
I just dropped $143.89, now the wait
HF http://www.harborfreight.com/dual-drum-rotary-rock-tumbler-67632.html http://www.harborfreight.com/5-tier-food-dehydrator-66906.html Midway http://www.midwayusa.com/product/635839/pellet-pins-brass-cleaning-media-stainless-steel-media-5-lb-bag?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip |
|
AR-15: The modern sporting Lego set.
|
I started with the big B model, and love the bright shiny results, saw this thread and ordered a HF for smaller quantities. I am using it as I type. One issue: I have the max of 3# weight on each drum, about 75 223 cases in each drum, and after an hour it seems to have stopped, with the motor getting hot. The fan is glued onto the pulley, and it had softened in the heat so the fan wasn't holding. I had to put a couple of small screws to secure the fan back onto the pulley. I removed a few cases and adjusted the belt tension and it seems to be working again. I would suggest checking it frequently until you have it adjusted well with the right total weight, being careful not to overload it.
|
|
|
Originally Posted By faldoc:
I started with the big B model, and love the bright shiny results, saw this thread and ordered a HF for smaller quantities. I am using it as I type. One issue: I have the max of 3# weight on each drum, about 75 223 cases in each drum, and after an hour it seems to have stopped, with the motor getting hot. The fan is glued onto the pulley, and it had softened in the heat so the fan wasn't holding. I had to put a couple of small screws to secure the fan back onto the pulley. I removed a few cases and adjusted the belt tension and it seems to be working again. I would suggest checking it frequently until you have it adjusted well with the right total weight, being careful not to overload it. Not my experience at all. I tightened the belt when I first got it, found I had tightened it too much, backed it off and its been perfect since. Make sure you "burp" the canisters when sealing them up. Had a cover come off before, what a mess! |
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
Originally Posted By dryflash3:
Originally Posted By tenex:
Originally Posted By Col_Cotton_Hill:
So they work just as good on the primer pocket's ?? Yes. Only if you decap cases before tumbling. A universal decapper is used, as a sizing die would get scratched running dirty cases through it. Universal decapper has a large interior so case does not come into contact with the inside of the die, only the decapping pin. Ya, I have the Lee decapper. I meant does the larger pin's get into the pockets as well as the smaller pin's. |
|
|
Awesome!
|
|
Order some golf shoes... otherwise we'll never get out of this place alive
.308- because people have a strange tendency to get behind things when you start shooting at them. |
Originally Posted By Col_Cotton_Hill:
Originally Posted By dryflash3:
Originally Posted By tenex:
Originally Posted By Col_Cotton_Hill:
So they work just as good on the primer pocket's ?? Yes. Only if you decap cases before tumbling. A universal decapper is used, as a sizing die would get scratched running dirty cases through it. Universal decapper has a large interior so case does not come into contact with the inside of the die, only the decapping pin. Ya, I have the Lee decapper. I meant does the larger pin's get into the pockets as well as the smaller pin's. I use the longer pins and haven't found any that stuck in the primer hole yet. |
|
Semper Fi
Opinions are like assholes, everyone has one, and everybody thinks everyone else's stinks. "Be wary of the man with only one rifle, he'll surely know how to use it" |
Originally Posted By deuc224:
Anyone having trouble breaking the bands on them? If so, what do you use to replace em? Have you adjusted the position of the motor? Loosen the screws on the side and set it so it doesn't stretch the drive band super tight but isn't so loose that the band slips when spinning. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.