Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/7/2011 3:30:10 PM EDT
I loaded some 9mm with power pistol yesterday and it shot great. The start load was 5.1 and I stopped at 5.5 grains working up with Montana Gold bullets.
The only reason I stopped going higher was it felt snappy and I was wanting a target load. Curiosity has me wanting to try more powder ?
Where are you guys with this combo ?

PS I searched and looked didn't see anything.....
Link Posted: 10/7/2011 3:52:10 PM EDT
I use 6.0gr with a 124gr Precision Delta HP.
Link Posted: 10/7/2011 5:20:55 PM EDT
I'm shooting ~4.0gr of Titegroup behind mine. Mellow as hell, no issues cycling, and they all go bang.
Link Posted: 10/7/2011 6:25:58 PM EDT
Link Posted: 10/10/2011 7:29:53 PM EDT
I load 5.6 and 6 with a precetion delta 124fmj. 6 is a little snappy. I looked at 125gr load data started low and worked my way up.
Link Posted: 10/10/2011 7:40:34 PM EDT
[Last Edit: 10/11/2011 4:10:54 AM EDT by Chris_1522]
Link Posted: 10/11/2011 7:58:15 AM EDT
Thanks for the replies. I was wanting to shoot some heavier loads and report back but didn't make it out yet.
Chris are them Rainiers copper washed bullets or jacketed? I have a ton of the washed ones that I want to load next. Do you use the lead data with them also?
Thanks Ed

Posted Via AR15.Com Mobile
Link Posted: 10/11/2011 8:12:02 AM EDT
Originally Posted By Chris_1522:
6 grains under a 124gr Rainier FP drives it to 1150 FPS average from my CZ-75B.

6.8 under a 115gr Berry's RN drives it to 1237 FPS average from the same gun.

It also cycled a Finnish KP-44 much faster and more consistently than Wolf.

Zero pressure signs.


ETA: Will be trying a heavier 124gr load in the future. I believe Alliant's data goes to 6.4 under a 124gr. Gold Dot. A Gold Dot would be loaded considerably shorter, and thus typically operate at higher pressures, than a RN bullet of similar construction would.


Reload with confidence.

I have loaded to MAX OAL with considerably more powder than that & it was safe in my custom Glock race gun. In fact I loaded 124s past 1330 FPS with Power Pistol. Reason: the rules required it (USPSA Major). Without a reason to load that hot though, you should do as I say & not as I do. Don't do it!
Link Posted: 10/11/2011 9:34:51 AM EDT
I use 5.7 grains of Power Pistol behind 124 grn FMJ and it works well. Very mild, cycles a Glock 17, Sig P226 and Beretta 92FS with no problems.
Top Top