Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Page Armory » GSG-5
Site Notices
Arrow Left Previous Page
Page / 24
Posted: 2/22/2008 1:14:21 PM EDT
[Last Edit: USCSOLDIER]
Lets see them
Link Posted: 2/22/2008 1:19:27 PM EDT
[#1]
As you wish...



Now fast forward 30 years....

Link Posted: 2/22/2008 1:21:28 PM EDT
[#2]
For now...
Link Posted: 2/22/2008 1:39:38 PM EDT
[#3]

Originally Posted By jackal2001:
For now...
i184.photobucket.com/albums/x124/jackal2001/gsg5/jackal2001_1.jpg


thats exactly what mine is gonna look like as soon a my scope gets here from CHINA
Link Posted: 2/22/2008 1:42:11 PM EDT
[Last Edit: jackal2001] [#4]

Originally Posted By USCSOLDIER:

Originally Posted By jackal2001:
For now...
i184.photobucket.com/albums/x124/jackal2001/gsg5/jackal2001_1.jpg


thats exactly what mine is gonna look like as soon a my scope gets here from CHINA


Here is the Sightmark Multi-recticle Reflex Sight.  Sorry for the crappy indoor pics but it is snowing outside.


Link Posted: 2/22/2008 6:59:19 PM EDT
[#5]
Link Posted: 2/22/2008 7:33:20 PM EDT
[Last Edit: Heineken] [#6]





*NitroVo RIS front handguard bought from Trinity Airsoft - slight modifications, added a rubber washer on the handguard screw to take up slack, sligtly bent inside metel prongs to help it sit straight, added 2 pieces of rubber on inside between the handguard and the gun to add support.  Had to take out the set screw under the handguard and replace it with a shorter one.  Last, I didn't like how the rails are held on buy only 2 srews at the far ends, so I gorilla glued the bottom one on since it would be under more stress from the vertical grip, just put i tiny bit on and cranked the screwd down, that bitch aint movin' now.  These are hard to find in stock anywhere...quality is pretty good, its NOT that shitty pot metel stuff, so thats very nice.

*Compsite Vertical Grip from Bravo Company - this is for an actual gun so i had to slightly sand to get it to fit the airsoft rail, nothing major...

*UTG H&K low profile optic rail - got it off ebay for 20 bucks shipped, nice and solid, tighten the back screws first, then tighten the front little by little till it sits strait...i added a washer under the front end so I could just crank it tight and not worie about it slightly leaning forward.  You can use the iron sights if the optic is off, I almost was going to ditch it and get one of the realy low pro ones some other people have, BUT I like how i have a little more rail room to put the optic on where its most comfortable for me, also the other ones are a littel too small for me, I would wory about breaking it.

*G&P121 aimpoint comp m2 clone - of ebay for 35 shipped, super happy with it, cant beat this for only 35 bucks!!!

*Classic Army retractabe stock - found one on ebay for 55 shipped, they are hard to find now cause all the gsg guys bought them up!!!

*Pannel Rail protectors...got them on ebay, they are the 11 rib leangth. they are the perfect size..not even sure of the name brand, it was 20 shipped for 4...I only needed 2 but i figure ill keep the other 2 incase i break one, they seem VERy durable though, I am pleasently surprized...

*Also I put the ladder style rail protectors on any other open rail spots to protect them from getting dinged...

*Last i replaced the 3 screws on the barrel pinch clamp with nicer ones and added nuts that fit into the recesses there.

I'm thinking about removing the mag disconect saftey and putting a slightly stronger spring under the hammer, but I have only had 1 light primer strike so far so i am still undecided...

GSG KICKS ASS!!!!
Link Posted: 2/22/2008 7:35:45 PM EDT
[#7]
Link Posted: 2/22/2008 8:04:17 PM EDT
[#8]



GSG-5 on the left, SW45 on the right
Link Posted: 2/22/2008 11:57:51 PM EDT
[#9]
Tagging a spot for my soon to be GSG-5.
Link Posted: 2/23/2008 1:49:59 AM EDT
[#10]
-Ditto-
Link Posted: 2/23/2008 3:17:18 PM EDT
[#11]
Link Posted: 2/23/2008 3:20:55 PM EDT
[#12]
Link Posted: 2/23/2008 4:59:16 PM EDT
[Last Edit: 45B10] [#13]
The A3 is my first one and the A2(Soon to be SBR'd) I just got today.

Another shot
Link Posted: 2/23/2008 5:09:22 PM EDT
[#14]

Originally Posted By Heineken:
i6.photobucket.com/albums/y247/Heineken420/DSCN1812.jpg
i6.photobucket.com/albums/y247/Heineken420/DSCN1813.jpg
i6.photobucket.com/albums/y247/Heineken420/03.jpg
i6.photobucket.com/albums/y247/Heineken420/DSCN1788.jpg

SNIP!

GSG KICKS ASS!!!!


That setup looks pretty tight. Specially making the airsoft RIS work. All it needs now is lots of range time to see how well it stands up.

KUDOS
Link Posted: 2/23/2008 7:50:00 PM EDT
[#15]
heres mine and some of its family


Link Posted: 2/23/2008 9:02:39 PM EDT
[#16]


tag
Link Posted: 2/23/2008 9:49:03 PM EDT
[Last Edit: coctailer] [#17]

Link Posted: 2/24/2008 12:07:06 AM EDT
[#18]





DK
Link Posted: 2/24/2008 9:51:31 AM EDT
[Last Edit: graywolf] [#19]




                                      +1 for the germans and the GSG-5
Link Posted: 2/25/2008 9:46:50 AM EDT
[#20]
Link Posted: 2/25/2008 9:48:11 AM EDT
[#21]
Link Posted: 2/25/2008 9:50:10 AM EDT
[Last Edit: graywolf] [#22]

awesome little shooter...
Link Posted: 2/25/2008 10:17:00 AM EDT
[#23]
Link Posted: 2/25/2008 10:20:06 AM EDT
[#24]
Link Posted: 2/25/2008 10:12:44 PM EDT
[#25]
I don't see that optic on their website, anyway, my reflex kind of flickered for a moment while i was shooting but then it came back on.  Maybe I didn't have the dial locked in to an on position.  I'll test it more next time at the range.  How much did you pay for that adco reflex?
Link Posted: 2/26/2008 3:31:55 PM EDT
[#26]
Link Posted: 2/26/2008 3:53:51 PM EDT
[Last Edit: jackal2001] [#27]
ETA, probably airsoft suppressor, guess no cutting or threading by you guys?
Link Posted: 2/26/2008 4:18:53 PM EDT
[#28]

Originally Posted By jackal2001:
ETA, probably airsoft suppressor, guess no cutting or threading by you guys?


Gotta be....it appears to be marked 9mm.



So how much are you guys really shooting these guns?

Lets see some shots of the bolts. Mine's getting pretty shiny after 7k. Only black left is in the middle. :D
Link Posted: 2/26/2008 4:28:17 PM EDT
[#29]
I only have about 650 rounds through mine, weather is crappy and cold.
Link Posted: 2/26/2008 4:28:17 PM EDT
[Last Edit: jackal2001] [#30]
double tap
Link Posted: 2/26/2008 4:32:09 PM EDT
[#31]

Originally Posted By jackal2001:
double tap


Same here but I've been braving it every couple of days. VT has zero indoor public ranges that I know of :(


(This is a pic thread after all :) )
Link Posted: 2/26/2008 5:18:43 PM EDT
[#32]
A friend of mine hooked me up with some MP40 forearm/buttstock pins that have the integrated sling hoop.  I needed them because I shoot rifles left handed.  He's taking it out to the range tomorrow, so I'll post some pics when it returns.  I'm also thinking about throwing a Zeiss Z-point on it.
Link Posted: 2/26/2008 6:36:13 PM EDT
[#33]

Originally Posted By bigbore:
A local customer just sent me these pics of the GSG I sold him last week.
www.adcofirearms.com/random/gsg5.jpg



I like the side folder but other than that its too damn busy for me
Link Posted: 2/26/2008 7:57:15 PM EDT
[#34]

Link Posted: 2/27/2008 6:08:41 AM EDT
[#35]
If Australian Customs didn't hate evil looking guns so much, I'd import one of these faster than you could say "twenty-two"
Link Posted: 2/28/2008 8:42:57 AM EDT
[Last Edit: JRX35] [#36]
My version with CA BT UMP Style stock and G&P Aimpoint clone. The stock fit like a glove!  No mods needed!  





Link Posted: 2/28/2008 7:12:21 PM EDT
[Last Edit: soldier1181] [#37]
New pic with the Aimpoint clone mounted.



And one more for fun.

Link Posted: 2/28/2008 8:39:18 PM EDT
[Last Edit: Triumph675] [#38]
height=8
Originally Posted By bigbore:
A local customer just sent me these pics of the GSG I sold him last week.
www.adcofirearms.com/random/gsg5.jpg


Bigbore, next time you talk to your customer, could you ask him what he clipped that fake supressor onto?

When the 10rd kits start to arrive and I can finally get my mitts on one, I would love to mount that same piece.

It looks like a King Arms MP5 Quick Detach KA-SIL-25.
Link Posted: 2/28/2008 9:35:34 PM EDT
[#39]

Originally Posted By Triumph675:

Originally Posted By bigbore:
A local customer just sent me these pics of the GSG I sold him last week.
www.adcofirearms.com/random/gsg5.jpg


Bigbore, next time you talk to your customer, could you ask him what he clipped that fake supressor onto?

When the 10rd kits start to arrive and I can finally get my mitts on one, I would love to mount that same piece.

It looks like a King Arms MP5 Quick Detach KA-SIL-25.


its probably not clipped to anything ..... the front sight base is threaded and the stock fake can simple threads into it and a set screw goes in the bottom of the FSB
Link Posted: 2/28/2008 11:19:50 PM EDT
[Last Edit: Triumph675] [#40]
Hmmm, it must clip onto something. Upon closer inspection, that looks like the Guarder MP5 Quick Detach Silencer(no threads) and not the King Arms. But both normally clips onto the three pronged claw adapter. I am totally interested in how he made that work now.
Link Posted: 2/29/2008 12:28:29 AM EDT
[#41]

Originally Posted By Triumph675:
Hmmm, it must clip onto something. Upon closer inspection, that looks like the Guarder MP5 Quick Detach Silencer(no threads) and not the King Arms. But both normally clips onto the three pronged claw adapter. I am totally interested in how he made that work now.


I concur - got interested after you named the brand.



$84 smackaroos at Cobraairsoft.com but out of stock.
Link Posted: 2/29/2008 7:20:27 PM EDT
[Last Edit: ADOR] [#42]
Here is my current set-up, using the CA MP5 folding stock. NO Modification whatsoever. The light on the foregrip is functional using the momentary switch pad. I also added a Hogue slip on rubber grip (for Glock). I just cut the bottom part to make it flushed.



Link Posted: 2/29/2008 7:30:19 PM EDT
[#43]
looks good, i was thinking about getting a hogue grip too. does it fit pretty snug?
Link Posted: 2/29/2008 8:10:30 PM EDT
[#44]

Originally Posted By aIIan:
looks good, i was thinking about getting a hogue grip too. does it fit pretty snug?


Bottom part is really tight. Top part is not as tight. Has a little space where you can insert a folded paper. Doesn't bother me. Grip feels much better now.
Link Posted: 2/29/2008 8:13:37 PM EDT
[#45]
Link Posted: 2/29/2008 8:50:02 PM EDT
[#46]
Thank you Bigbore!

Now I have something to ponder while I wait for my gun to arrive in the store.
Time to pull out the drafting table and get to work.
Link Posted: 2/29/2008 9:59:48 PM EDT
[#47]

Originally Posted By ADOR:
Here is my current set-up, using the CA MP5 folding stock. NO Modification whatsoever. The light on the foregrip is functional using the momentary switch pad. I also added a Hogue slip on rubber grip (for Glock). I just cut the bottom part to make it flushed.

i204.photobucket.com/albums/bb182/ADOR46/DSC01908.jpg
i204.photobucket.com/albums/bb182/ADOR46/DSC01909.jpg


son of a bith, now im gonna have to buy something else for my GSG...i realy like that grip on there...what model glock is it for? dont they make different hogue grips for different models?

damn, also i have always personaly liked the retractable stocks better...BUT the more i see the side folders the more temping they become, i do have to admit they look sharp as hell...and its tempting because everyone is saying they fit so perfectly...
Link Posted: 2/29/2008 10:13:56 PM EDT
[Last Edit: ADOR] [#48]

Originally Posted By Heineken:

Originally Posted By ADOR:
Here is my current set-up, using the CA MP5 folding stock. NO Modification whatsoever. The light on the foregrip is functional using the momentary switch pad. I also added a Hogue slip on rubber grip (for Glock). I just cut the bottom part to make it flushed.

i204.photobucket.com/albums/bb182/ADOR46/DSC01908.jpg
i204.photobucket.com/albums/bb182/ADOR46/DSC01909.jpg


son of a bith, now im gonna have to buy something else for my GSG...i realy like that grip on there...what model glock is it for? dont they make different hogue grips for different models?

damn, also i have always personaly liked the retractable stocks better...BUT the more i see the side folders the more temping they become, i do have to admit they look sharp as hell...and its tempting because everyone is saying they fit so perfectly...


I also have a CA collapsible stock. I like it more than the folder. But I have decided NOT to use it for now until we find a work around fix on that "falling off" slider issue. I DO NOT want to break any law. But that's just me.

I'm sure there are other slip on Hogue grips for other brand pistols. The one I got just said for "Glock". This is the only one that my local shop have today. And it will do for me.
Link Posted: 3/1/2008 10:35:27 AM EDT
[#49]

Originally Posted By ADOR:
Here is my current set-up, using the CA MP5 folding stock. NO Modification whatsoever. The light on the foregrip is functional using the momentary switch pad. I also added a Hogue slip on rubber grip (for Glock). I just cut the bottom part to make it flushed.

i204.photobucket.com/albums/bb182/ADOR46/DSC01908.jpg
i204.photobucket.com/albums/bb182/ADOR46/DSC01909.jpg


Hey ADOR, where'd you get the forearm/light setup, and is it real or a knock off?  It looks really nice, also any fitting issues with it or problems with having it on there and say an SBR's version w/a real can on it?
Link Posted: 3/1/2008 3:23:27 PM EDT
[Last Edit: ADOR] [#50]

Originally Posted By 04hemi:

Originally Posted By ADOR:
Here is my current set-up, using the CA MP5 folding stock. NO Modification whatsoever. The light on the foregrip is functional using the momentary switch pad. I also added a Hogue slip on rubber grip (for Glock). I just cut the bottom part to make it flushed.

i204.photobucket.com/albums/bb182/ADOR46/DSC01908.jpg
i204.photobucket.com/albums/bb182/ADOR46/DSC01909.jpg


Hey ADOR, where'd you get the forearm/light setup, and is it real or a knock off?  It looks really nice, also any fitting issues with it or problems with having it on there and say an SBR's version w/a real can on it?


04hemi, I got the forearm from Airsoftextreme. It's an airsoft handuard, but it fits PERFECTLY, ZERO modification. Only thing you have to do is to change that crew that supports the handguard to a longer one. I heard the same screw also keeps the barrel from rotating. Regarding problems with REAL can, I am not sure. But I would think if the REAL can's diameter is the same as the FAKE one, I wouldn't think there will be any problem.
Arrow Left Previous Page
Page / 24
Page Armory » GSG-5
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top