Login System 
IMPORTANT: Please note that you must now log in with your email address and not your username!
 Little_Bo_Peep 
Member
Joined: Sep 2006  MO, USA
 Posts: 58 Feedback: 0% (0) |
Posted: 8/9/2012 11:08:56 PM
THE IMAGE ABOVE IS A PAID ADVERTISEMENT Thanks, Little_Bo |
|
|
|
Friendly_Crusader
Nonsense personified
Team Member
Joined: Mar 2009 AZ, USA
Posts: 6683 Feedback: 100% (75) Link To This Post |
Posted: 8/10/2012 2:46:51 AM
I don't know of a guide, but basically all you need to do is:
1: make sure the weapon is empty 2: take off the upper 3: remove the piston and gas plug 4: use the 2mm Allen key wrench that came with your rifle and unscrew the receiver side plate screws. 5: unscrew and remove the 1913 rail 6: lastly, there are mounting/support plates, which you can wiggle off to remove if needed. The gas block will be removed by the smith with a jig. |
|
|
shrikefan
Member
Team Member
Joined: Jan 2007 USA
Posts: 10733 Feedback: 100% (119) Link To This Post |
Posted: 8/10/2012 6:44:09 AM
Originally Posted By Friendly_Crusader:
I don't know of a guide, but basically all you need to do is: 1: make sure the weapon is empty 2: take off the upper 3: remove the piston and gas plug 4: use the 2mm Allen key wrench that came with your rifle and unscrew the receiver side plate screws. 5: unscrew and remove the 1913 rail 6: lastly, there are mounting/support plates, which you can wiggle off to remove if needed. The gas block will be removed by the smith with a jig. Good to know. |
|
ARCHIVED
