User Panel
|
Originally Posted By BigWaylon:
Supposed to be the same mounts for Omega, Harvester BB, and Hybrid. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By samson7x:
I'm interested. These would also work with the hybrid, no? I haven't done my research even though I just bought one. Supposed to be the same mounts for Omega, Harvester BB, and Hybrid. Excellent. I'm definitely interested in some Ti parts to lighten it up/save money. |
|
|
I have my endcaps and am patiently waiting for my direct thread modules... Hopefully they are finished soon :-)
|
|
|
Originally Posted By Vitamin_G:
I have my endcaps and am patiently waiting for my direct thread modules... Hopefully they are finished soon :-) View Quote He just got that prototype done today. We'll meet up and test fit and take pics on Tue. Assuming all is well, he'll get started on all the orders he has (and I'd assume make a couple extra in 1/2-28 and 5/8-24). I asked him for a ballpark estimate on when they'd be ready, and he said: If I can start turning them next week and the week after, then mill work. About the beginning of August. I'm on vacation the last week of July. |
|
|
Originally Posted By BigWaylon:
I'll just leave these here... http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/8189B8EC-8D27-4F9E-BC5B-C383A4CE528D_zps310k4vna.jpg http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/A8026444-D744-4FC8-A993-47EEE42ED031_zpsqyjnvrau.jpg http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/B04AEF9A-B488-41DB-A30F-C9B0B4DF8148_zpsfqo5zp5i.jpg View Quote Those look pretty sweet! I didn't know they were that popular, I tried selling mine and never got any bites . Has he mentioned anymore regarding the blast shields? |
|
|
Originally Posted By Moses_J:
Those look pretty sweet! I didn't know they were that popular, I tried selling mine and never got any bites . Has he mentioned anymore regarding the blast shields? View Quote I know that was next on his to-do list once these were done. I didn't bother asking him when he sent me those pics, but I'll definitely ask him Tue when I go visit. (And will add a note here) |
|
|
Looks like more of my money will be heading to HEE!
Thanks for this! |
|
|
Originally Posted By BigWaylon:
I haven't seen it in person. Machinist sent me the pics earlier this afternoon. I'll head up there Tue morning to test fit with my Omega. He has a threaded tube, but I want to verify with the suppressor before he starts making any. That one is 1018 steel, and lighter than the OEM piece. He made it out of something cheaper just to work on the design. The Ti should definitely be even lighter than that. The oblong cutouts will accept a Saker or Omega pin wrench. Pretty neat idea. I'd imagine the other cutouts would allow for the hook end of the wrench to grab it, but they're mainly for weight reduction. He's talking $70/shipped for Ti, which beats the $100-$125 for the OEM part...plus the reduction in weight. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Engineer:
How about leaving it at my house instead? :) Omega direct thread adapters? What are you using to tighten them? I haven't seen it in person. Machinist sent me the pics earlier this afternoon. I'll head up there Tue morning to test fit with my Omega. He has a threaded tube, but I want to verify with the suppressor before he starts making any. That one is 1018 steel, and lighter than the OEM piece. He made it out of something cheaper just to work on the design. The Ti should definitely be even lighter than that. The oblong cutouts will accept a Saker or Omega pin wrench. Pretty neat idea. I'd imagine the other cutouts would allow for the hook end of the wrench to grab it, but they're mainly for weight reduction. He's talking $70/shipped for Ti, which beats the $100-$125 for the OEM part...plus the reduction in weight. That's a great solution to the wrench fitting issues! Now i want new end caps with the same milling |
|
|
Originally Posted By Blackcsvt:
That's a great solution to the wrench fitting issues! Now i want new end caps with the same milling View Quote Don't think I haven't asked already. You won't need new caps. The spacing of the six round holes is the same as it is on the oblong. So, the current caps can simply be modified. Not sure if the cost, but I can ask Tuesday. It could also be an option on any new orders. I'd think he'd want to "redo" any while the mill is setup for these adapters just to make turnaround time faster. I'll report back when I get that answer. |
|
|
Originally Posted By Stephen4036:
how much length do you cut by getting that direct thread instead of running ASR. View Quote Don't think I saw anybody answer this, so I did a quick comparison when I went to visit the machinist today (since that's where my ASR mount was). Rough measurement with a tape mesh see, but it's just shy of an inch. Close to the same as swapping anchor brake to flat cap. |
|
|
How long has it been taking people to get their orders ?
|
|
|
Originally Posted By MIGZ:
How long has it been taking people to get their orders ? View Quote will depend on what it is... For instance, people probably ordered direct thread adapters 6+ months ago when we discussed the possibility...and he's yet to make the first batch. For the Omega/MAAD adapters it was kinda done on a preorder the first time. I think he usually makes extras each time, so some people probably luck up and get product within a couple days. |
|
|
Originally Posted By BigWaylon:
FWIW... I think I mentioned I left my end caps with him. Got a text earlier today to say they were done: http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/24750940-F388-44C7-ACA1-B13A740918DD_zpsrrwovly1.jpg I mentioned I was a little surprised that they didn't have the open areas milled out for the hooks on the wrenches to catch. The only reason I really mentioned it is they just happened to be spaced to fit the custom wrenches he made for me (pics back on page 1 or 2). So, less than 30 min later, I get this pic: http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/6B76AD0B-D116-4BF7-98AC-B5A31E454A90_zpscd1oayyi.jpg View Quote Is this DM or the new guy? MAHA |
|
Quote Originally Posted By rageracing
"......Tell the guy in the gun store that ARFCOM said he is a fucking dumb ass......" |
|
Originally Posted By BigWaylon:
I don't think anything in this thread is really DM. The pics I just posted are definitely the guy local to me. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Mahamotorworks:
Is this DM or the new guy? MAHA I don't think anything in this thread is really DM. The pics I just posted are definitely the guy local to me. Please PM me his info. I have a shop that is looking for some options. Thanks MAHA |
|
Quote Originally Posted By rageracing
"......Tell the guy in the gun store that ARFCOM said he is a fucking dumb ass......" |
Big Waylon,
Are all of the direct thread mounts going to have those sweet notches? I would love to have them on mine. Also, what will the thread depth be? Thanks! |
|
|
Originally Posted By 44Bogger:
Big Waylon, Are all of the direct thread mounts going to have those sweet notches? I would love to have them on mine. Also, what will the thread depth be? Thanks! View Quote as far as I know, all the DTs will look like the example above...with the oblong holes for the pins and notches on the outside for the hooks... don't know what the thread depth is, but he based it off the 5/8-24 that came with my Omega, so I'd assume it's fairly close... |
|
|
Anyone that got end caps are you coating them so they won't be a shining beacon in the sun light?
If so what did you use? |
|
|
|
Thanks BW. |
|
Woe unto them that call evil good, and good evil; that put darkness for light, and light for darkness; that put bitter for sweet, and sweet for bitter! Isaiah 5:20
|
Originally Posted By Engineer:
A little off topic, but kudos to HEE. He and I worked on getting a set of 3-lug wrenches made up since I never see any available for sale. Ended up doing two hole patterns because different 3-lug adapters from different manufacturers seemed to have different diameters: Very affordable and top notch work! View Quote Very cool. Bet he could sell a couple of those. Pity the 3-lug isn't more standard than it should/could be. |
|
|
Originally Posted By BigWaylon:
Very cool. Bet he could sell a couple of those. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Engineer:
A little off topic, but kudos to HEE. He and I worked on getting a set of 3-lug wrenches made up since I never see any available for sale. Ended up doing two hole patterns because different 3-lug adapters from different manufacturers seemed to have different diameters: Very affordable and top notch work! Very cool. Bet he could sell a couple of those. I hope so! He said he has the program saved and ready to go if anybody else would like to order one. Posted Via AR15.Com Mobile |
|
|
|
Originally Posted By BigWaylon:
Looks decently thick/sturdy. What material did y'all decide on? View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Engineer:
I hope so! He said he has the program saved and ready to go if anybody else would like to order one. Looks decently thick/sturdy. What material did y'all decide on? I honestly don't know - I left material selection up to him since it was just a wrench |
|
|
Could someone PM me the contact info please. I've got a Saker and a Hybrid I'd like to get end caps for.
Thanks, CK |
|
|
Originally Posted By CharileKilo:
Could someone PM me the contact info please. I've got a Saker and a Hybrid I'd like to get end caps for. View Quote FYI... No Saker caps at this point. IIRC, he does have one of mine at the shop for whenever he decides to tackle that project. I'm hoping ASR blast shields are next up. |
|
|
I may be in contact with your guy. I'm wanting a flat YHM/Omega mount. I'm wanting a 6" short suppressor and I've got a submitted F4 for one, but if I can just use a short YHM QD mount and have a relatively flat YHM adapter I can get really close to that 6" length. I'm going to wait until my Omega's F4 clears to see how my Wraith mounts work with the first baffle. I've already got the long YHM/Omega mount from DM to be able to run 30 cal mounts.
|
|
|
Originally Posted By PineappleDevil:
I may be in contact with your guy. I'm wanting a flat YHM/Omega mount. I'm wanting a 6" short suppressor and I've got a submitted F4 for one, but if I can just use a short YHM QD mount and have a relatively flat YHM adapter I can get really close to that 6" length. I'm going to wait until my Omega's F4 clears to see how my Wraith mounts work with the first baffle. I've already got the long YHM/Omega mount from DM to be able to run 30 cal mounts. View Quote Never hurts to ask. He does have my DM YHM/Omega mount, plus the specs from DM for the YHM portion. No doubt he can duplicate it, just a matter of when he finds the time. I want a new one just to get rid of the spanner cutouts on mine. I've also considered asking him to make me two shorter Saker Y-Mount adapters. The SiCo version designed to be able to handle the longer 7.62 MB/FH mounts, and all mine are the shorter 5.56/LT length. |
|
|
Are the direct thread adapters being mass produced yet? I have my endcaps already and don't want to pester him.
|
|
|
Originally Posted By Vitamin_G:
Are the direct thread adapters being mass produced yet? I have my endcaps already and don't want to pester him. View Quote In progress. I think he said the first batch would be done early Aug, but he's out of town today through next Sat. If you ordered a DT adapter, I'll assume it's in the first batch. He may make some extra, but I'd email him now if you're not already on a list. |
|
|
Thank you, just shot him an email
|
|
|
BigWaylon,
Can you please send me the contact info. for the machinist? I am hoping to buy a Ti .300 flat endcap for my jailed Omega and get on the waiting list for a Ti DT adapter as well. Thanks! |
|
|
Originally Posted By BigWaylon:
FYI... No Saker caps at this point. IIRC, he does have one of mine at the shop for whenever he decides to tackle that project. I'm hoping ASR blast shields are next up. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By CharileKilo:
Could someone PM me the contact info please. I've got a Saker and a Hybrid I'd like to get end caps for. FYI... No Saker caps at this point. IIRC, he does have one of mine at the shop for whenever he decides to tackle that project. I'm hoping ASR blast shields are next up. Any pics of the anticipated design for the ASR blast shields? May I also get his contact information so that I can get on his list for one of them? Thanks! |
|
|
Originally Posted By BigWaylon:
The theory is just something simple (thus relatively inexpensive), like the SSS version for the YHM & 51T mounts. Not going to worry about a latching mechanism, rather just use the threads and the taper for engagement. http://www.weaponoutfitters.com/media/catalog/product/cache/1/image/580x365/9df78eab33525d08d6e5fb8d27136e95/a/a/aac_qd_brake_shield_one_size.jpg View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Hero:
Any pics of the anticipated design for the ASR blast shields? May I also get his contact information so that I can get on his list for one of them? The theory is just something simple (thus relatively inexpensive), like the SSS version for the YHM & 51T mounts. Not going to worry about a latching mechanism, rather just use the threads and the taper for engagement. http://www.weaponoutfitters.com/media/catalog/product/cache/1/image/580x365/9df78eab33525d08d6e5fb8d27136e95/a/a/aac_qd_brake_shield_one_size.jpg Thanks for the pic and the IM. Edit: Just to clarify, does the blast shield that he's making mate with the ASR mount, or does it forego the ASR mount entirely and screw right onto the threads on the ASR style muzzle brake? |
|
|
Originally Posted By Hero:
Edit: Just to clarify, does the blast shield that he's making mate with the ASR mount, or does it forego the ASR mount entirely and screw right onto the threads on the ASR style muzzle brake? View Quote Straight onto the MB/FH. We discussed it earlier in the thread, here. |
|
|
Originally Posted By BigWaylon:
Straight onto the MB/FH. We discussed it earlier in the thread, here. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By Hero:
Edit: Just to clarify, does the blast shield that he's making mate with the ASR mount, or does it forego the ASR mount entirely and screw right onto the threads on the ASR style muzzle brake? Straight onto the MB/FH. We discussed it earlier in the thread, here. Thanks for the link. Can't wait! |
|
|
Would be interested in one of those blast shields as well.
|
|
|
Team Ranstad
|
I am definitely interested in a minimalist ASR blast shield. Feel free to IM me contact info.
|
|
|
Anyone have the thread pitch specs on the Harvester big bore/ Omega ASR and similar mounts? (didn't see it listed in this thread)
Also, could someone forwards the contact info for the person making end caps for the omega? Thanks |
|
|
Definitely want a blast shield. BigWaylon could you put together a group buy with your machinist? If they can be done in a timely manner I would be willing to pre-pay or a partial down payment. I know a lot of times people commit to these kinds of things and then flake out.
|
|
|
Originally Posted By ThePitt:
Definitely want a blast shield. BigWaylon could you put together a group buy with your machinist? If they can be done in a timely manner I would be willing to pre-pay or a partial down payment. I know a lot of times people commit to these kinds of things and then flake out. View Quote We kinda did that on the Omega/MAAD adapter. I think it was $5/off for anybody on the initial run. May try it again, but not until he at least has a prototype. What's everybody's thoughts on bare metal vs a black finish of some kind? Y'all willing to pay a little extra for a finish? I know he can send stuff out in batches, but I don't know the details at this point. |
|
|
I would pay extra to have my stuff black like the rest of the can.
I had ordered a 9/16" direct mount and a .223 flat end cap. I think he has my end cap done but I told Howard to just send them together when he had the mount complete. |
|
|
I would also prefer the blast shield be finished. Paying a little extra for that wouldn't be a problem.
|
|
Team Ranstad
|
Just to be clear...I was really just talking about the blast shields. As I understand it, he gets charged for each shipment, and the number of pieces don't matter. So, if somebody really wanted something else done and wasn't in a rush, maybe it could be done. That's something you'll have to work out with him.
I believe he should be back at work today, and (at least as of a month of so ago) he was planning to finish up the DT adapters for anybody that already contacted him. I'm going to wait to later in the week to touch base, and will ask about the blast shield prototype at that point. I'd think Scott @ THSF would let us use his site again for a preorder, so we'll see how that goes. I'm not going to tally up any kind of group buy here. |
|
|
Is it possible to get an M18x1 threaded base for an Omega and/or Saker from this guy?
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.