User Panel
[#1]
|
|
|
[#2]
Originally Posted By RTUtah:
On a 16" barrel, it won't beat the baffles too much, according to most. My gripe with the Vortex is the tuning-fork ringing. View Quote |
|
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
[#3]
I actually don't mind it all that much, considering that I bought the flash hider for it's performance. It does hide flash very, very well.
|
|
|
[#4]
|
|
"When a man knows he is to be hanged in a fortnight, it concentrates his mind wonderfully." - Dr. Samuel Johnson
|
[Last Edit: Temper]
[#5]
I figure there's no better place to ask but here. I came across Lilja 18" middy for cheap and I figure instead of building a Mk12 Mod1 like I originally intended, I have the barrel cut to 17" and put on my brake and collar on that and rock a RECCE style build. Now here's the question. I already have the brake and long collar for the mk12, can I use that same collar on the lilja? It appears to be govt profile, maybe a tad heavier underneath the handguards.
Edit: Solved. You can with no issues. |
|
|
[#6]
|
|
|
[#8]
Originally Posted By AZMAN42:
Sorry if this has been asked or is a stupid question. I have an AEM5 in jail at the moment, I was originally planning on doing a MODH build... but since I have had time to think while waiting for my can, I have thought about something else. This leads to my question... Has anyone ran their AEM5 under a rail? Not a PRI rail I have seen that before, Im talking a URX4 or the TROY MLOK rails it wold be a tight fit but based on OD and ID measurements it should be possible. I mocked this one up, (its not 100% to scale) but curious to see if any one has done it? Ill be running it on a 16" BA barrel. Pictured below is my photoshop mashup with the TROY 15" Rail. http://i.imgur.com/8UzhKdS.png View Quote |
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
[#9]
I run my Ops Inc can under a URX4 (well, just a little bit). I have it on a 12" barrel with a 10" URX4 - original keymod style.
Works fine. End gets a little hot after a while though. |
|
|
[#10]
Pics?
|
|
|
[#11]
I'd like to finally get a host for the AEM5. Kept thinking I would pay $1400 for a PRI mod 0 upper on sale but cant yet get myself to for just an upper as I wouldn't be doing a true clone anyways.
I have seen a few 16" AEM5 hosts that aren't clones. Anyone have photos of 18" non clone hosts? Was planning WOA or BA with 15" rail. Also, anyone you would recommend to assemble the upper (I have done some in past) with the correct collar and mount or is it easily done by end user as long as profile is correct with corresponding mount? |
|
|
[#12]
Originally Posted By WillysJeep:
I'd like to finally get a host for the AEM5. Kept thinking I would pay $1400 for a PRI mod 0 upper on sale but cant yet get myself to for just an upper as I wouldn't be doing a true clone anyways. I have seen a few 16" AEM5 hosts that aren't clones. Anyone have photos of 18" non clone hosts? Was planning WOA or BA with 15" rail. Also, anyone you would recommend to assemble the upper (I have done some in past) with the correct collar and mount or is it easily done by end user as long as profile is correct with corresponding mount? View Quote |
|
|
[Last Edit: SpyHawk]
[#13]
|
|
|
[#14]
awesome!! thank you
Originally Posted By SpyHawk:
Not a great picture, and it's not configured like this any more, but it's the same barrel, can, and handguard. The can is basically almost a whole keymod slot into the handguard. http://i1382.photobucket.com/albums/ah276/mig1nc/IMAG0404_zpsbcr7vsjw.jpg View Quote |
|
|
[#15]
|
|
|
[#16]
Originally Posted By _rory_:
Geissele mk4 and the 18" barrel gives just enough room for the collar. http://i639.photobucket.com/albums/uu116/rellafrit/Mobile%20Uploads/0602172219_zpsalygcngp.jpg http://i639.photobucket.com/albums/uu116/rellafrit/Mobile%20Uploads/0602172025_zpsgfthhnju.jpg View Quote |
|
|
[#17]
|
|
No free man shall ever be debarred the use of arms
Thomas Jefferson If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson |
[#18]
Originally Posted By FREEFALLE7:
Well I just bought a AEM5 yesturday on a form 4 trust to replace my YHM can on my MK-12. When I get my mounts I will post some pics from my first congeal visit until then... https://www.AR15.Com/media/mediaFiles/20856/IMG-1174-194604.jpg View Quote |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
[Last Edit: FreefallRet]
[#19]
Originally Posted By RTUtah:
Long time in the making. View Quote View All Quotes View All Quotes Originally Posted By RTUtah:
Originally Posted By FREEFALLE7:
Well I just bought a AEM5 yesturday on a form 4 trust to replace my YHM can on my MK-12. When I get my mounts I will post some pics from my first congeal visit until then... https://www.AR15.Com/media/mediaFiles/20856/IMG-1174-194604.jpg Had the YHM suppressor on my LMT 308, so being a cheapskate I got a YHM 556 mount for my SPR. I sold the LMT and got a SR-25 and SF suppressor. After retirement I thought it was time to get the correct suppressor, it still won't be clone correct because I hate ARMS rings. It has went though many changes in the last 14 yrs. When I first bought it 2008 (Cop Hutal I think) |
|
No free man shall ever be debarred the use of arms
Thomas Jefferson If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson |
[#20]
Sorry for the thread hijack but which companies produce barrels that accept the collar straight from the factory?
I ask because I have an AEM5 in Purgatory and I have a BHW spr contour barrel but it looks like the collar step is closer to the gas block than the drawings show. |
|
We have to protect our phoney baloney jobs here, gentlemen! We must do something about this immediately! Immediately! Immediately! Harrumph! Harrumph! Harrumph!
|
[#21]
Originally Posted By dmac7979:
Sorry for the thread hijack but which companies produce barrels that accept the collar straight from the factory? I ask because I have an AEM5 in Purgatory and I have a BHW spr contour barrel but it looks like the collar step is closer to the gas block than the drawings show. View Quote |
|
No free man shall ever be debarred the use of arms
Thomas Jefferson If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson |
[#22]
Ballistic Advantage does as well, if you don't want to break the bank. They come with an accuracy guarantee.
|
|
|
[#23]
|
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
[#24]
Originally Posted By dmac7979:
Sorry for the thread hijack but which companies produce barrels that accept the collar straight from the factory? I ask because I have an AEM5 in Purgatory and I have a BHW spr contour barrel but it looks like the collar step is closer to the gas block than the drawings show. View Quote |
|
|
[Last Edit: k31user]
[#25]
.725 to a point 2.4" back from the bare muzzle, then .749 to the gas block. Short collar with PRI flip up front sight, long collar without.
|
|
|
[#26]
|
|
We have to protect our phoney baloney jobs here, gentlemen! We must do something about this immediately! Immediately! Immediately! Harrumph! Harrumph! Harrumph!
|
[#27]
Centurion Arms, HCS.
|
|
|
[#28]
Originally Posted By SpyHawk:
Not a great picture, and it's not configured like this any more, but it's the same barrel, can, and handguard. The can is basically almost a whole keymod slot into the handguard. http://i1382.photobucket.com/albums/ah276/mig1nc/IMAG0404_zpsbcr7vsjw.jpg View Quote |
|
|
[Last Edit: SpyHawk]
[#29]
Originally Posted By deuc224:
C'mon man, i need complete specs on this rifle! Exact handguard, suppressor, barrel, how it attaches to the barrel( brake, m4 collar?) I would build this for a trunk gun in a minute View Quote Knight's Armament URX4 Keymod 10" - I built this before the 10.75" was available, and before M-Lok was available. Ops Inc. 15th Model MBS (like an AEM3 but slightly lighter, I think maybe due to the holes in the baffles). Ballistic Advantage 12" carbine length barrel (no longer in the catalog, but the 11.5" and 12.5" are also available with the MBS profile). Ops Inc. muzzle brake mount. Ops Inc. standard MBS M4 collar. VLTOR A5 RE with springco green spring and A5H2 buffer. BCM Gunfighter charging handle. AAC Improved Bolt Carrier Group (suppressor optimized cam path) Also critical to the build is the MicroMOA Govnah. Mine only has two positions. 5.56 full power unsuppressed and suppressed. Sometimes really weak ammo like PMC bronze or Silver bear will short stroke. And of course the Noveske SBR lower. My future plans, if I don't do something drastic like get an MCX conversion kit when they come out, and the Allen Engineering Sig Collar, is to get a 12.5" midlength with micro gas block and short collar. |
|
|
[#30]
Originally Posted By bradpierson26:
DSG arms too View Quote View All Quotes View All Quotes |
|
|
[#31]
Originally Posted By SpyHawk:
:) OK. This is an amazing shooter. The best SBR AR I've shot. The stroke is super smooth and there's no gas face at all. Zero. Knight's Armament URX4 Keymod 10" - I built this before the 10.75" was available, and before M-Lok was available. Ops Inc. 15th Model MBS (like an AEM3 but slightly lighter, I think maybe due to the holes in the baffles). Ballistic Advantage 12" carbine length barrel (no longer in the catalog, but the 11.5" and 12.5" are also available with the MBS profile). Ops Inc. muzzle brake mount. Ops Inc. standard MBS M4 collar. VLTOR A5 RE with springco green spring and A5H2 buffer. BCM Gunfighter charging handle. AAC Improved Bolt Carrier Group (suppressor optimized cam path) Also critical to the build is the MicroMOA Govnah. Mine only has two positions. 5.56 full power unsuppressed and suppressed. Sometimes really weak ammo like PMC bronze or Silver bear will short stroke. And of course the Noveske SBR lower. My future plans, if I don't do something drastic like get an MCX conversion kit when they come out, and the Allen Engineering Sig Collar, is to get a 12.5" midlength with micro gas block and short collar. View Quote Regarding the MCX, im planning on getting one in the future. I bought a 6.75 inch barrel by accident so i just kept it and plan on making a black mamba out of it soon. |
|
|
[Last Edit: mms2]
[#32]
are Ballistic Advantage Gov barrels to spec for aem 2,3,4 set ups?
they look like they should be from the website the 12.5 seems perfect for the them. several posts about BA and aem5 for spr barrel but nothing about the m4 profile barrels since was looking at the other cans.. |
|
|
[#33]
Originally Posted By mms2:
are Ballistic Advantage Gov barrels to spec for aem 2,3,4 set ups? they look like they should be from the website the 12.5 seems perfect for the them. several posts about BA and aem5 for spr barrel but nothing about the m4 profile barrels since was looking at the other cans.. View Quote |
|
|
[#34]
awesome thanks
|
|
|
[#36]
With the new Dead Air can coming out, I'm starting to wonder something:
I've seen DB numbers of about -40db reduction for the AEM2, but is that number confirmed? If so, the AEM's are still among the quietest suppressors around. I'm not all about chasing numbers, but since this is going to be set up as an HD gun, I want to minimize the risk of hurting my kids' ears if I ever have to use it in the house. I've been almost dead set on the AEM2 for a while, but want to be sure. |
|
|
[#37]
40db on an AEM2? Nope.
|
|
|
[#38]
|
|
|
[#39]
Anyone know if the collar adapter extender will work on a 10.5 with fsb?
|
|
PalmettoStateArmory:
"speaking for the many" is trolling and will be subject to moderation. |
[#40]
|
|
|
[#41]
|
|
PalmettoStateArmory:
"speaking for the many" is trolling and will be subject to moderation. |
[Last Edit: JAR-SPR]
[#42]
Originally Posted By AR_DIESEL:
I should've clarified, I have the aem2. I'm cool with shaving the bayo lug. Thanks for the reply. Anyone out there know for certain? View Quote View All Quotes View All Quotes Originally Posted By AR_DIESEL:
Originally Posted By JAR-SPR:
For the AEM2/3/4, it may work, but you might have to shave some off of the bayo lug. Anyone out there know for certain? ETA: https://adcofirearms.com/shop/categories/silencers/collar-adapter-extender/ Put this on the barrel, and then a standard AE brake or flash hider. GTG. |
|
|
[#43]
Originally Posted By JAR-SPR:
The barrel extension was originally intended for 11.5" Colt barrels running AEM2/3/4s. If you are okay with shaving the bayo lug, then it should work for an AEM2. ETA: https://adcofirearms.com/shop/categories/silencers/collar-adapter-extender/ Put this on the barrel, and then a standard AE brake or flash hider. GTG. View Quote |
|
PalmettoStateArmory:
"speaking for the many" is trolling and will be subject to moderation. |
[Last Edit: BMPRacing]
[#44]
|
|
|
[#45]
Originally Posted By FREEFALLE7:
Yea I bought that upper in 2003 and took it to Afghanistan in 2007-2008. Had the YHM suppressor on my LMT 308, so being a cheapskate I got a YHM 556 mount for my SPR. I sold the LMT and got a SR-25 and SF suppressor. After retirement I thought it was time to get the correct suppressor, it still won't be clone correct because I hate ARMS rings. It has went though many changes in the last 14 yrs. When I first bought it http://pic3.picturetrail.com/VOL16/709417/1822696/40107998.jpg http://pic3.picturetrail.com/VOL16/709417/1822696/36885802.jpg 2008 (Cop Hutal I think) http://pic80.picturetrail.com/VOL965/4056977/12946540/313666290.jpg View Quote Thanks for your service and the pictures. Can you elaborate on why you have a dislike for the ARMS rings? I have zero experience with them. |
|
|
[#46]
Originally Posted By TennesseeRat:
You may be bad but have you served in Afghan with your own upper and patrolled in a Humvee mounting a Dshk like this Ranger? Lol. Thanks for your service and the pictures. Can you elaborate on why you have a dislike for the ARMS rings? I have zero experience with them. View Quote View All Quotes View All Quotes Originally Posted By TennesseeRat:
Originally Posted By FREEFALLE7:
Yea I bought that upper in 2003 and took it to Afghanistan in 2007-2008. Had the YHM suppressor on my LMT 308, so being a cheapskate I got a YHM 556 mount for my SPR. I sold the LMT and got a SR-25 and SF suppressor. After retirement I thought it was time to get the correct suppressor, it still won't be clone correct because I hate ARMS rings. It has went though many changes in the last 14 yrs. When I first bought it http://pic3.picturetrail.com/VOL16/709417/1822696/40107998.jpg http://pic3.picturetrail.com/VOL16/709417/1822696/36885802.jpg 2008 (Cop Hutal I think) http://pic80.picturetrail.com/VOL965/4056977/12946540/313666290.jpg Thanks for your service and the pictures. Can you elaborate on why you have a dislike for the ARMS rings? I have zero experience with them. I had one get snagged on some gear and came unlocked, It didn't affect my zero etc but I just prefer bolt on rings. Its just my preference. I have to Admit the HMMWV belonged to the Romanians and this leads to another story. Just before that deployment I went to Ranger school(RC 06-07) and there was a Romanian officer that was in our class. The TC of that truck recognized my name as the Romanian Officer(his former commander) told him about me The Romanian guy was a very confident leader and spoke about 4 different languages and spoke English really well. Another funny tidbit is him and I failed the Darby phase together |
|
No free man shall ever be debarred the use of arms
Thomas Jefferson If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson |
[#47]
|
|
|
[#48]
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can?
Attached File I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. |
|
|
[#49]
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. View Quote Not to mention that the bore might not be concentric to the barrel. |
|
|
[#50]
Ron,
Any timeframe on when you'll be sending ADCO more collar adapter extenders? I have a 10.5" barrel with a fsb so I need one! |
|
PalmettoStateArmory:
"speaking for the many" is trolling and will be subject to moderation. |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.