User Panel
Posted: 4/2/2015 11:37:05 PM EDT
|
|
View Quote April Fools Day was yesterday bruh |
|
Uzi mag well adapter comments:
I have an Uzi and I've had one of the no-new-slot-Uzi mag-to-AR magwell adapters for years and do really like it. BUT it is finicky about which mags will fit into its magwell, even with some filing to the adapter. So I have sorted out an id'd a dozen or so mags that fit (mostly 25 rnd, only a couple 32s will fit but I usually only shoot 25s in the Uzi also). If some one were to bring it back (not likely with the availablity of good quality, reasonably priced Colt-style mags), the mag fit issue would have to be addressed. |
|
|
original design AR-180. not sure why I want one I just like it but the originals are too expensive and they're kinda collectors items and i'm a shooter and I don't want an AR-180B. daewoos would be cool to.
|
|
Quoted: original design AR-180. not sure why I want one I just like it but the originals are too expensive and they're kinda collectors items and i'm a shooter and I don't want an AR-180B. daewoos would be cool to. View Quote http://www.nodakspud.com/NDS-18S.htm And of course we'd like to see this available again: http://www.kitsune.addr.com/Firearms/Revolvers/Medusa_Model_47.htm |
|
Quoted:
Quoted: original design AR-180. not sure why I want one I just like it but the originals are too expensive and they're kinda collectors items and i'm a shooter and I don't want an AR-180B. daewoos would be cool to. http://www.nodakspud.com/NDS-18S.htm Now that is freaking cool. |
|
Mp7 clone in original caliber or 22 win mag. But made by a company which
can actually deliver. IE not keltec Us made daewoo k1 or k2 Us made chicom97 Us made famas or l85 |
|
|
|
|
Quoted: this guy, I like this guy. I'll take everything he said above. View Quote View All Quotes View All Quotes Quoted: Quoted: Mp7 clone in original caliber or 22 win mag. But made by a company which can actually deliver. IE not keltec Us made daewoo k1 or k2 Us made chicom97 Us made famas or l85 this guy, I like this guy. I'll take everything he said above. |
|
I'm surprised the Mini-14 factory style collapsable stock hasn't been mentioned yet. Maybe it's just implied anymore.
|
|
Quoted: I'm surprised the Mini-14 factory style collapsable stock hasn't been mentioned yet. Maybe it's just implied anymore. View Quote That, and while we're dreaming about things Sturm Ruger should, but won't do.... I wish they'd swallow their pride and make a serious attempt at a Mini 14 that accepts AR15 magazines. |
|
|
Quoted:
That, and while we're dreaming about things Sturm Ruger should, but won't do.... I wish they'd swallow their pride and make a serious attempt at a Mini 14 that accepts AR15 magazines. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'm surprised the Mini-14 factory style collapsable stock hasn't been mentioned yet. Maybe it's just implied anymore. That, and while we're dreaming about things Sturm Ruger should, but won't do.... I wish they'd swallow their pride and make a serious attempt at a Mini 14 that accepts AR15 magazines. and bring back the pc9 carbine along with the .40 and .45 versions |
|
SR-71 Blackbird
Coke made with real sugar Machines that make .22lr ammo |
|
|
And of course, if physically possible, we need a drop in Glock magwell adapter.
|
|
Quoted:
That, and while we're dreaming about things Sturm Ruger should, but won't do.... I wish they'd swallow their pride and make a serious attempt at a Mini 14 that accepts AR15 magazines. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'm surprised the Mini-14 factory style collapsable stock hasn't been mentioned yet. Maybe it's just implied anymore. That, and while we're dreaming about things Sturm Ruger should, but won't do.... I wish they'd swallow their pride and make a serious attempt at a Mini 14 that accepts AR15 magazines. Mini-15 with original style factory folder would sell like crazy. Ditto for a "Mini-47" that took AK mags. You'd think seeing Mossberg sell a hojillion units of the MVP, an otherwise unremarkable bolt-action rifle, would maybe make other companies think about mag compatibility, but creativity from Ruger is asking a bit much. Quoted:
And of course, if physically possible, we need a drop in Glock magwell adapter. Not physically possible. As for me: 1. Mossberg MVP in 7.62x39 that takes AK mags (bonus points for 5.45x39 that takes -74 mags, but even I don't think that's happening) 2. AK-74 mag AR lower. 3. Vz58 that takes AK mags (yes, I know I'd lose the BHO, oh well) 4. KSG with alternating dual tube simultaneous feed. 5. Glock lower for Uzi 6. Improved version of the FS2000 (seriously, FN, so close) 7. FN PS90 that shoots a standard caliber. |
|
Quoted: 5. Glock lower for Uzi View Quote Would this do? http://masterpiecearms.com/shop/mpa30dmg-9mm-pistol/ |
|
Quoted:
Browning BDM. I think the '94 AWB pretty much killed it. Now that magazine capacity isn't restricted, I think it would do well. If you've never handled one, you should take the chance if you get it. They are a dream to hold and shoot. http://cdn2.armslist.com/sites/armslist/uploads/posts/2012/01/07/270351_02_browning_bdm_9mm_640.jpg View Quote I would be into this, if they reversed the safety so it was 1911-style. They are super thin for their capacity. |
|
Quoted:
2. AK-74 mag AR lower. View Quote http://www.theflatspot.net/ar-15-receiver-flat.html Could you weld an AK-74 magwell to that? Posted Via AR15.Com Mobile |
|
Quoted: Browning BDM. I think the '94 AWB pretty much killed it. Now that magazine capacity isn't restricted, I think it would do well. If you've never handled one, you should take the chance if you get it. They are a dream to hold and shoot. http://cdn2.armslist.com/sites/armslist/uploads/posts/2012/01/07/270351_02_browning_bdm_9mm_640.jpg View Quote |
|
Robinson Armament M96 rifles and carbines w/ replacement parts...................................
|
|
|
|
|
Pepsi clear. ; ) Gun related, Marlin camp carbines. Always liked the looks of them.
Posted Via AR15.Com Mobile |
|
7. FN PS90 that shoots a standard caliber.
This shit is genuineness! Imagine the P90 in 9, 40, and 45.... |
|
Mechanically the mini-14 cannot take a AR magazine.
Besides if they made a new semi auto 223 just like a mini14 but with AR mags peoplewould undervalue the hell out of it and complain about it not being an AR15 |
|
Winchester Model 61 and 62
Winchester Model 88 Savage Model 99 Ruger Mark II pistols----the Mark III should never have happened |
|
AR-180 needs to be brought back. All Armalite has to do is use a non-polymer lower and price it under 1K. I had a AR-180B and wish I would not have sold it, despite the relative fragility of the front pivot pin.
Also they need to bring back: Laudanum. Saturday morning cartoons that don't suck. Stump remover (grandpa's). Sudafed on the shelf. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.