User Panel
Originally Posted By NightOwl: Nyah, I liked the HK style so got a pair for mine. Works fine until I decide if/which optic to go with eventually. http://i.imgur.com/jNFbdEel.jpg View Quote I really do like the HK sights. Those look really good on your rifle. Next thing I want is a bayonet lug. So needs a bayonet. I LIKE BAYONETS DAMN IT!!!!! MUST FIT OKC-3S TO ARX!!!! Now I'm a gun nerd :) |
|
|
Originally Posted By glklvr:
I tried about five different BUIS', including the much vaunted LPA flip ups. CZ scorpion sights were too low for me, the factory are just crazy high, and everything else falls in between, mostly AR height sights. I have finally settled on Troy micros. They seem to be the correct height. View Quote |
|
|
Troy micros work just fine with a mini dot without a base
|
|
|
What type hand stop are you using on your ARX 100 ?
|
|
|
BCM stubby grip for me.
|
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
Originally Posted By Valmet62:
What type hand stop are you using on your ARX 100 ? View Quote Attached File |
|
|
Thanks for the info !!!
|
|
|
|
Originally Posted By Valmet62:
One more question for all you the ARX 100 experts: I found this photo on another AR15.com post and the rifle appears to have a magpug butt pad. Has anyone added something similar to their rifle and any suggestions on how to do it ? Thanks in advance ! http://bluerealmstudios.com/Downloads/myarx100.jpg View Quote |
|
|
Originally Posted By Valmet62:
One more question for all you the ARX 100 experts: I found this photo on another AR15.com post and the rifle appears to have a magpug butt pad. Has anyone added something similar to their rifle and any suggestions on how to do it ? Thanks in advance ! http://bluerealmstudios.com/Downloads/myarx100.jpg View Quote Nexus Tactile |
|
|
Originally Posted By Master_Blaster:
Seen it before. No one has ever come forward to iffer up any details. I'd guess an adhesive bond is used, but don't know what type. I've thought about trying to do it using industrial velcro, since it has some decently strong adhesive for the hook/loop backing strips, but which can still be removed without causing damage to the buttstock. View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Originally Posted By Valmet62:
One more question for all you the ARX 100 experts: I found this photo on another AR15.com post and the rifle appears to have a magpug butt pad. Has anyone added something similar to their rifle and any suggestions on how to do it ? Thanks in advance ! http://bluerealmstudios.com/Downloads/myarx100.jpg |
|
|
|
View Quote |
|
|
Originally Posted By glklvr:
The buttpad is solid plastic on the ARX. View Quote View All Quotes View All Quotes Originally Posted By glklvr:
Originally Posted By ak47Dennis:
I would hope it screws on like a Magpul stock pad. Any thing else is Mickey Mouse.. Additionaly i dont get your point whether its solid or hollow how is that relavant to attaching a buttpad? |
|
|
Originally Posted By Master_Blaster:
That's where I saw it, but I don't see where in the site any of those listed items can actually be ordered. View Quote View All Quotes View All Quotes Originally Posted By Master_Blaster:
Attached File |
|
|
Originally Posted By ak47Dennis:
I dont want to come across as argumentive but know its not. The push button mechnism to extend and retract the stock is located with in it. Additionaly i dont get your point whether its solid or hollow how is that relavant to attaching a buttpad? View Quote Attached File |
|
|
Went ahead and ordered a parts kit form Botch as a spare to my SBR and use the other barrel to SBR my FDE ARX. Still waiting on my SBR to ship though it looks like form 3 is approved. Slooow shipping. Does anybody with factory SBR know if it ships with lower rail and cover?
|
|
|
Originally Posted By AKDoc:
Went ahead and ordered a parts kit form Botch as a spare to my SBR and use the other barrel to SBR my FDE ARX. Still waiting on my SBR to ship though it looks like form 3 is approved. Slooow shipping. Does anybody with factory SBR know if it ships with lower rail and cover? View Quote |
|
|
Originally Posted By onekneedown: It doesn't ship with the full lower rail. I ended up ordering mine direct from Beretta with the extended charging handle. It has the slide off cover and a very small section of rail under it. View Quote |
|
|
Hey guys
This seems like the ARX-100 master thread so I thought I'd post here. I've got a bunch of questions. First how does the ARX suppress? I've got a reasonably high backpressure can and was wondering if it is going to be super gassy. I've seen mixed reports, some people saying the gas is awful, and some saying otherwise. Are the factory 10" barrels more gassy than the 16" or something? I assume that you use the normal (N) non adverse setting when shooting suppressed right? Does anyone have experience installing different muzzle devices? Suppressor mount muzzle devices? How do you hold the barrel when installing a new muzzle device? With an AR you just vice up the upper using a bev block, or upper vice block. How do you do it with an ARX? Any experience chopping the factory 16" barrel to ~14.5" then pinning and welding a muzzle device? Is there enough material to shoulder a muzzle device against or do you need to add a shoulder when you get the barrel chopped and threaded? What are the best groups you can expect out of this thing? 1.5 MOA possibly? Or more likely 2-2.5 MOA? How is the return to zero when you quick change a barrel? Anyone completed the magwell modification to allow more magazine compatibility? Thanks! |
|
|
Originally Posted By precisionphilosophy:
Does anyone have experience installing different muzzle devices? Suppressor mount muzzle devices? How do you hold the barrel when installing a new muzzle device? With an AR you just vice up the upper using a bev block, or upper vice block. How do you do it with an ARX? View Quote Also, upper receiver vise blocks should never be used for muzzle device installation or removal on an AR. You could end up loosening the barrel from the barrel extension and/or shear the indexing pin and damage the upper receiver's indexing pin notch. |
|
|
Originally Posted By precisionphilosophy:
Hey guys This seems like the ARX-100 master thread so I thought I'd post here. I've got a bunch of questions. First how does the ARX suppress? I've got a reasonably high backpressure can and was wondering if it is going to be super gassy. I've seen mixed reports, some people saying the gas is awful, and some saying otherwise. Are the factory 10" barrels more gassy than the 16" or something? I assume that you use the normal (N) non adverse setting when shooting suppressed right? Does anyone have experience installing different muzzle devices? Suppressor mount muzzle devices? How do you hold the barrel when installing a new muzzle device? With an AR you just vice up the upper using a bev block, or upper vice block. How do you do it with an ARX? Any experience chopping the factory 16" barrel to ~14.5" then pinning and welding a muzzle device? Is there enough material to shoulder a muzzle device against or do you need to add a shoulder when you get the barrel chopped and threaded? What are the best groups you can expect out of this thing? 1.5 MOA possibly? Or more likely 2-2.5 MOA? How is the return to zero when you quick change a barrel? Anyone completed the magwell modification to allow more magazine compatibility? Thanks! View Quote Suppressed shooting with a shorter bbl should result in comparitively less back pressure, if for no other reason than the pressure drops off sooner due to the bullet leaving the muzzle sooner than a longer bbl, all else being equal. Set the gas block on 'S' when running it suppressed. 'N' is the larger port setting for dirty conditions or underpowered ammo. A 3rd setting specific for can use would've been a nice feature. Installing a muzzle device on a cut down bbl will require a crown washer. Get a bbl vice from Brownels. RTZ should be pretty good for bbl reinstall, though different lengths will have unique zero points. It's as accurate as a CZ Bren, which no one bitches about. The ARX catches more flak because it doesn't resemble an AR or SCAR. With the 10" bbl mounted, it's nearly the same size as a CZ EVO 3. Lastly, mod your mags & leave the magwell alone. |
|
|
When I changed out my muzzle device, I clamped the flats of the nut at the front of the barrel collar into a vice. No problems.
|
|
|
Originally Posted By precisionphilosophy:
First how does the ARX suppress? I've got a reasonably high backpressure can and was wondering if it is going to be super gassy. I've seen mixed reports, some people saying the gas is awful, and some saying otherwise. Are the factory 10" barrels more gassy than the 16" or something? I assume that you use the normal (N) non adverse setting when shooting suppressed right? View Quote View All Quotes View All Quotes Originally Posted By precisionphilosophy:
First how does the ARX suppress? I've got a reasonably high backpressure can and was wondering if it is going to be super gassy. I've seen mixed reports, some people saying the gas is awful, and some saying otherwise. Are the factory 10" barrels more gassy than the 16" or something? I assume that you use the normal (N) non adverse setting when shooting suppressed right? The barrel/ gas block setting, there are two holes in the barrel to allow gas in, the gas block switches between only one, or doing both. Normal 16" setup is one hole works with mil-spec, 2 holes with weaker ammo. Usually when cutting down a barrel, you open up the gas holes to allow more in to cycle it faster given that there's less dwell time. So I've seen someone that cut to 10" or whatever and opened up the first hole to function with silencer on, then opened up the second hold to work without silencer. Does anyone have experience installing different muzzle devices? Suppressor mount muzzle devices? How do you hold the barrel when installing a new muzzle device? With an AR you just vice up the upper using a bev block, or upper vice block. How do you do it with an ARX? Anyone completed the magwell modification to allow more magazine compatibility? Thanks! |
|
|
How hard is it to mill off the stops on a mag? I've never personally encountered an overinsertion problem using USGI mags (no tabs or fences). Mod the mag.
|
|
|
So what's the consensus regarding the best replacement flip up sights for the ARX 100 ? I just picked a rifle up from Academy Sports and the stock sights to me are a hideously impractical and sit too high on the rifle. Any info would be appreciated !!
|
|
|
any pics of these sights mounted on the rifle ?
|
|
|
|
Originally Posted By Master_Blaster:
How hard is it to mill off the stops on a mag? I've never personally encountered an overinsertion problem using USGI mags (no tabs or fences). Mod the mag. View Quote |
|
|
Most of my PMags are Gen 2s and I've kept it that way. I see no tangible advantage to the Gen 3s for my purposes or most any purposes.
|
|
|
|
|
Originally Posted By ak47Dennis:
I not seeing any place that has them other than a seller on Amazon View Quote View All Quotes View All Quotes |
|
|
Those LPA sights look as tall as the original polymer sights, which are too high. Are they?
|
|
|
Originally Posted By willi3d:
Those LPA sights look as tall as the original polymer sights, which are too high. Are they? View Quote I've tried a bunch of BUIS systems, including the LPAs, looking for the right height for the ARX rail. I settled on Troy Micros. I've also tried the CZ Scorpion iron sights (too low). High to low, at least from what I've found: Factory plastic BUIS 90% of BUIS, including LPAs (AR height) Troy Micros CZ Scorpion irons Probably going to get rid of my LPAs, since they're too high for me. |
|
|
Does anybody have a list of what magazines will and will not work in the ARX 100 ?
|
|
|
|
Originally Posted By glklvr: The Beretta is designed to take NATO STANAG magazines. Pretty sure the only non-compatible mag right now is the Magpul M3 and Lancer AWM. View Quote |
|
|
Originally Posted By precisionphilosophy:
... Any tips for making the cheek riser a bit more stable? Mine moves around and gets knocked around. View Quote -jimmy |
|
|
Originally Posted By 556Cliff:
Lancer AWMs work fine in the ARX. I thought that I heard somewhere that it doesn't work with the pre-AWM lancer mags. View Quote View All Quotes View All Quotes Originally Posted By 556Cliff:
Originally Posted By glklvr: The Beretta is designed to take NATO STANAG magazines. Pretty sure the only non-compatible mag right now is the Magpul M3 and Lancer AWM. The L5A is the second generation magazine and deletes the giant lip. L5AWM improves the feedlip design. Both fit and function fine. Magpul M3 and the second generation EMAG have those overinsertion nubs and will not fit. Grinding them off is all that is required if you absolutely gotta use a new generation Magpul. |
|
|
FYI Academy Sports "Hot Buy" this week is Beretta ARX 100 for $799!
In stores only at Academy Sporting Goods Stores. |
|
|
Is there enough barrel diameter on the rifle-length profile barrel to cut down to SBR (10.5) and re-thread 1/2 x28?????
I think this just looks way better as an SBR, despite paying Uncle Stamp his $200 tax stamp |
|
|
Has anyone considered trying to work the grenade launcher attachment area into a pic rail?
|
|
|
|
I added some rail mounted quick connects to add a sling. The one on the top rail allows use of the sling with the stock folded. The port cover is one of Jimmy’s prototypes. The Steiner light fits perfectly, I’m guessing it was designed for the ARX since they are sister companies. The combo of Troy micros and TA44 is perfect for this Attached File
Attached File Attached File rifle, it’s not accurate enough to justify any more magnification. |
|
|
|
|
Where can one find a clamp on bayonet lug for the ARX 100?
It seems a a few years ago there were some aftermarket ar15 pencil clamp on types that should work, but not too common today - searching on google yields old out of stock items. Anyone find some? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.