User Panel
[#1]
Originally Posted By Maiden316:
Glock 30s View Quote That's great work. Would love to know how you do your boarders. It's one of those things that continues to escape me. I have a theory how some of the pros do theirs but it'd require investing in equipment beyond soldering/wood burning tools that I don't presently have. If you'd be willing to share I'd very much would love to know. |
|
|
[#2]
Originally Posted By CtSmshr:
http://i1285.photobucket.com/albums/a584/GudOlBoy1/20140204_163723_zps66011f73.jpg http://i1285.photobucket.com/albums/a584/GudOlBoy1/20140204_162745_zpsf3e67048.jpg View Quote To the guys who are getting a texture like this are yall just using a really fine tip on your iron? I love the way this looks and have a G22 that I have coming in that may get chopped and stippled. |
|
|
[#3]
|
|
|
[#4]
Which tip and technique did you use? . I've been stippling my pmags and magpul furniture with a standard tip. I have a fine tip, I like the look of and I don't need the traction on my PPS. I was going to go with the fine tip, but I like the bark look on your PPS job. Great pics too.
|
|
|
[#5]
For those that CCW these pistols, how does the stippling do contacting your shirt / body?
|
|
Isaiah 1:18 - "Come now, let us reason together," says the LORD: "though your sins are like scarlet, they shall be as white as snow"
|
[#6]
Originally Posted By Fooboy:
For those that CCW these pistols, how does the stippling do contacting your shirt / body? View Quote View All Quotes View All Quotes Originally Posted By Fooboy:
For those that CCW these pistols, how does the stippling do contacting your shirt / body? I personally think that everything other than the bark stippling is to aggressive for ccw, I tried the sun burst look on an ar pistol grip, tucked it into my belt to see how it felt and could tell immediately that it was too much. Originally Posted By Core:
Which tip and technique did you use? . I've been stippling my pmags and magpul furniture with a standard tip. I have a fine tip, I like the look of and I don't need the traction on my PPS. I was going to go with the fine tip, but I like the bark look on your PPS job. Great pics too. Use a flat tip and practice on a p-mag or something first, it took me about an hour to figure out a good technique for the bark look. |
|
|
[#7]
|
|
|
[#8]
|
|
A home defense shotgun is like your appendix...a relic of some bygone era, rendered unnecessary by evolution. But everyone still has one, and occasionally, they do still kill people.
Desdinova721 |
[#9]
Just read through the whole thread, and have been doing some practice stippling on pmags and AR grips with pretty decent success. About to tackle my G19, but have a question on the undercut of the trigger guard.
Seems like most people are using a dremel for this, but are you using the dremel to give you the actual shape of the undercut or just to make removing the material easier/quicker? Seems like the sanding drums I have for mine are too small in diameter go make the entire undercut. Also, what speed on the dremel, slow or a little higher? Thanks in advance. |
|
|
that guy who did that thing that one time
CT, USA
|
[Last Edit: lostman518]
[#11]
|
"The way I see it, the asshole with all the bullet holes should explain why he's bleeding all over your floor." -Sgt_Fish
|
[#12]
I am a fan of magpull grips for their compartment, but I have extra large hands.
What I like to do to add some size to the grips is give it an aggressive stipple job then hit it with multiple coats of spray on truck bed liner. It adds further texture while toning down the roughness/sharpness of the grip while adding just enough mass to fill my hand a bit better. If you vary the aggressiveness of the stippling you can adjust the palm swell and reach of the grip. |
|
|
[#13]
Originally Posted By hodgescl:
I am a fan of magpull grips for their compartment, but I have extra large hands. What I like to do to add some size to the grips is give it an aggressive stipple job then hit it with multiple coats of spray on truck bed liner. It adds further texture while toning down the roughness/sharpness of the grip while adding just enough mass to fill my hand a bit better. If you vary the aggressiveness of the stippling you can adjust the palm swell and reach of the grip. View Quote Have you ever tried a LT APEG grip? They don't have the storage compartment like you prefer, but they're very hand-filling. |
|
Squire
"Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839 I survived ARFbortion2016 and all I got was this stupid sigline |
[Last Edit: scott69916]
[#14]
|
|
|
[#15]
|
|
"Nothing says 'come to my tree stand for a good cornholing' more than a Browning Buckmark sticker on your oversized truck." - dport
"Tactical" is a mindset, not an equipment list. |
[Last Edit: Shooter_556]
[#16]
Ha I was bored over the weekend and stippled some PMags. Will post some pics later
|
|
|
[#17]
I really like this method. Which tip are you using?
|
|
|
[#19]
Quick question. I'm starting fresh with a gen 3 glock 19 frame. Should I sand off the factory texture before starting to stipple?
|
|
|
[#20]
Not a lot of information exchange here. It's like look at what I did, cya.. You don't need to remove the original finish you can just stipple over it. I came here to see which tip to use for the bark technique.
|
|
|
[#21]
Originally Posted By localguitarhero:
I personally think that everything other than the bark stippling is to aggressive for ccw, I tried the sun burst look on an ar pistol grip, tucked it into my belt to see how it felt and could tell immediately that it was too much. View Quote View All Quotes View All Quotes Originally Posted By localguitarhero:
Originally Posted By Fooboy:
For those that CCW these pistols, how does the stippling do contacting your shirt / body? |
|
|
[#22]
Is there a temperature that works best for this?
Was thinking about this guy but it doesn't list the wattage. Wood Burning Kit,72 pcs Wood Burning Tool with Adjustable Temperature 200~450C, Wood Burner Tools Set with Pyrography Pen for Embossing Carving DIY Adults Crafts Beginners https://www.amazon.com/dp/B08GX8FNBT/ref=cm_sw_r_apan_glt_i_D04XZ7ZJGAF42TPB149J |
|
|
[#23]
Originally Posted By DFA1: Is there a temperature that works best for this? Was thinking about this guy but it doesn't list the wattage. Wood Burning Kit,72 pcs Wood Burning Tool with Adjustable Temperature 200~450C, Wood Burner Tools Set with Pyrography Pen for Embossing Carving DIY Adults Crafts Beginners https://www.amazon.com/dp/B08GX8FNBT/ref=cm_sw_r_apan_glt_i_D04XZ7ZJGAF42TPB149J View Quote Whatever temp soldering irons run at. That's all I've ever used, but I'm no pro. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.