Refinishing Forum Picture Thread - Page 65

Refinishing Forum Picture Thread (Page 65 of 67)

Gr8Santini Member Joined Jun 2002 Posts 4617 EE 100% (41) USA	Posted: 5/19/2016 7:59:50 PM EDT [#1] Quote History Originally Posted By aIIan: This is what happens when you have two different guns done in tungsten from two different shops http://allangreendale.net/dump/arfcom/tsten.jpg View Quote Bottom one likely isn't tungsten.

NUcadet07

Tank Geek

Joined Sep 2004
Posts 16617
EE 100% (68)

CT, USA

Posted: 5/21/2016 10:15:19 PM EDT

[#2]

Quote History

Originally Posted By Gr8Santini:

Bottom one likely isn't tungsten.

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By Gr8Santini:

Originally Posted By aIIan:
This is what happens when you have two different guns done in tungsten from two different shops

http://allangreendale.net/dump/arfcom/tsten.jpg

Bottom one likely isn't tungsten.

Correct, looks more like titanium. Looks good, but yeah, I may be slightly annoyed had that been mine. Then again, as an applicator, unless a customer explicitly picks the exact color from my samples, they often tell me "something like this", and that is something like Tungsten... Sort of...

Instagram
@madpigcustoms

dangerdan

Your mom goes to college

Joined Sep 2005
Posts 20026
EE 100% (57)

TX, USA

Posted: 5/22/2016 1:52:44 AM EDT

[#3]

I've been working on a custom mix of metallic browns.
Shades are OD green and black. Tinted with tan.

Lots of combinations.

Texas Tea didn't come out right. It's a dark brown color. The sky is reflecting making it look grey. I think I also had a bad batch because it was super thin (note the runs). This happened twice. At first I thought I didn't empty the acetone out of my cup completely. That was not the case.

I didn't spend much time on surface prep. I just needed something quick and fast to get the job done, so there are imperfections, but it gets me results.

Uncle
Sam's
Misguided
Children

April 2016 "FBHO has been pretty pro gun so far, or at a minimum..neutral." - CPT_CAVEMAN

SHWELL

Member

Joined May 2011
Posts 79
EE 0% (0)

USA

Posted: 6/26/2016 6:47:59 PM EDT

[#4]

I used to use the Dupli Color Engine Enamels a lot a few years ago. When my preferred colors stopped being stocked I moved on to Cerakote. I watched a youtube vid be Captain Berz and was inspired to try it again (Dupli Color Cast Coat Iron). I pinted my .308 build with it and felt very satisfied with the results (As expected), and decided to do my DDI AK the same way..

Here are a few pics.

I know I could get the same color with Cerakote, but I dont have ez access to an oven to cure it like I prefer, so I haven't used it in months. I am not claiming this to be a replacement, just an alternative.

*And pics have Manufacturer names of the products so the question is answered quickly and easily.

plante74 Member Joined Sep 2007 Posts 1316 EE 100% (7) ME, USA	Posted: 7/13/2016 6:53:05 AM EDT [#5] Quote History Originally Posted By eastky454: I decided to make it all match, so here is the finished product http://i148.photobucket.com/albums/s39/ukelk/xray4.jpg http://i148.photobucket.com/albums/s39/ukelk/xray3.jpg View Quote You nailed that. Looks awesome.
	OEF 10-11

KTM300XCW Joined Apr 2010 Posts 483 EE 100% (323) TX, USA	Posted: 9/6/2016 3:48:47 PM EDT [#6] The Green stock on the Hog Hunter stood out like a sore thumb here in Texas so I decided to camo it using natural sponges and spray paint. Below are before and after pics. I am now thinking about doing the same thing to a couple of my AR's.

Gr8Santini

Member

Joined Jun 2002
Posts 4866
EE 100% (41)

USA

Posted: 9/6/2016 5:11:09 PM EDT

[#7]

Quote History

Originally Posted By KTM300XCW:
The Green stock on the Hog Hunter stood out like a sore thumb here in Texas so I decided to camo it using natural sponges and spray paint. Below are before and after pics. I am now thinking about doing the same thing to a couple of my AR's.

<a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-3_zpseolwcobd.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-3_zpseolwcobd.jpg</a>

<a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-1_zpslktqi45g.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-1_zpslktqi45g.jpg</a>

<a href="http://s916.photobucket.com/user/TORCHRIDER/media/HH-2_zpsau9hemil.jpg.html" target="_blank">http://i916.photobucket.com/albums/ad1/TORCHRIDER/HH-2_zpsau9hemil.jpg</a>

View Quote

The picture by the tree is amazing.

MISTERMOON Joined Jan 2008 Posts 648 EE 0% (0) USA	Posted: 9/8/2016 7:11:27 PM EDT [#8] I want the same! Nice work.

cop1211 Joined Apr 2006 Posts 2087 EE 100% (317) FL, USA	Posted: 9/8/2016 10:48:29 PM EDT [#9] Quote History Originally Posted By MISTERMOON: I want the same! Nice work. <a href="http://s804.photobucket.com/user/Steve_Tyliszczak/media/image_zps6u9alryv.jpeg.html" target="_blank">http://i804.photobucket.com/albums/yy324/Steve_Tyliszczak/image_zps6u9alryv.jpeg</a> View Quote Is this Mil Spec green?

NUcadet07

Tank Geek

Joined Sep 2004
Posts 16830
EE 100% (68)

CT, USA

Posted: 9/10/2016 6:38:29 AM EDT

[#10]

Quote History

Originally Posted By cop1211:

Is this Mil Spec green?

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By cop1211:

Originally Posted By MISTERMOON:
I want the same! Nice work.

<a href="http://s804.photobucket.com/user/Steve_Tyliszczak/media/image_zps6u9alryv.jpeg.html" target="_blank">http://i804.photobucket.com/albums/yy324/Steve_Tyliszczak/image_zps6u9alryv.jpeg</a>

Is this Mil Spec green?

Custom mix of greens for an OD green to match my dads 1944 Willys Jeep. The registration number on the Glock matches his Jeep as well.

Instagram
@madpigcustoms

M1A4ME Member Joined Apr 2008 Posts 7312 EE 0% (0) VA, USA	Posted: 9/10/2016 11:21:40 AM EDT [#11] Pre B CZ 85. Before. Parkerizing worn off it places, rust in/under the Parkerizing, grips pretty worn, etc. Probably not bad for where it's been and how it was used/treated. After. New springs/pins/barrel/sights/grips and two tone cerakoted by Primary Machine.
	How you live your life is important. Just be sure the memory of how you died doesn't overshadow the tales of how you lived your life.

chmodx

Medium speed, some drag

Joined Feb 2012
Posts 9121
EE 100% (90)

VA, USA

Posted: 9/12/2016 4:12:40 PM EDT

[Last Edit: chmodx] [#12]

Originally Posted By SHWELL:
I used to use the Dupli Color Engine Enamels a lot a few years ago. When my preferred colors stopped being stocked I moved on to Cerakote. I watched a youtube vid be Captain Berz and was inspired to try it again (Dupli Color Cast Coat Iron). I pinted my .308 build with it and felt very satisfied with the results (As expected), and decided to do my DDI AK the same way..

Here are a few pics.

http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1573e.jpg

http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1575e.jpg

http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1570e.jpg

http://i153.photobucket.com/albums/s218/SHWELL11/ar15com%20shares/DSC_1567e.jpg

I know I could get the same color with Cerakote, but I dont have ez access to an oven to cure it like I prefer, so I haven't used it in months. I am not claiming this to be a replacement, just an alternative.

*And pics have Manufacturer names of the products so the question is answered quickly and easily.

View Quote

How's the durability been with this? Any discoloration of any kind? solvent resistance?

davidenorth Member Joined Aug 2003 Posts 2183 EE 100% (24) MN, USA	Posted: 9/25/2016 5:51:06 PM EDT [#13] Here is my Savage Axis .223 with new Krylon OD/ Marblelizing Black paint with clear coat matte.
	I always knew you had to be willing to die to even do this job. But, I don't want to push my chips forward and go out and meet something I don't understand. A man would have to put his soul at hazard. He'd have to say, "O.K.I'll be part of this world

Wormydog1987

Member

Joined Nov 2012
Posts 1266
EE 100% (36)

TX, USA

Posted: 10/13/2016 10:03:32 PM EDT

[#14]

Completely redid my hunting AR.

16" Wilson Combat LW barrel
12" Midwest Industries G3 LWM m-lok handguard
Remington R-15 receivers
Aero Precision Ultra Lightweight extended mount
Geissele S3G trigger
Trijicon TR20-2 mildot
Mission First Tactical Minimalist stock
Ergo grip
2A titanium gas block
Spike's Tactical M16 bolt carrier
BADASS safety
BCM GF CH
LWRC enhanced bolt
Form 1 all titanium suppressor
Magpul trigger guard
Aervoe rattle can paint job

It weighs 7lbs 6oz now. I think it weighed over 9lbs before.

Be more human

Scorejr Joined Mar 2015 Posts 7 EE 0% (0) TN, USA	Posted: 10/26/2016 10:15:07 PM EDT [#15] " /> Also used Aervoe.

J_Wynn

Member

Joined Apr 2014
Posts 644
EE 100% (6)

NE, USA

Posted: 11/26/2016 11:51:54 PM EDT

[#16]

This gun was okay, but I just couldn't get excited about the way it looked. Too much black, it was way boring.

Went downstairs this evening with a couple beers, 3 cans of Krylon, and a natural sponge and ended up with this. The factory buttpad got messed up- I'll order a new one and it'll be perfect.

It breaks up the outline and makes the gun much more appealing to me. I love this thing now. It looks different without being over the top. Now I'm motivated to go walk a few draws this fall!

Tango_6 Member Joined Oct 2011 Posts 5285 EE 100% (23) IL, USA	Posted: 1/17/2017 9:31:03 PM EDT [#17] What colors is that. Details?

carmodyh Member Joined Aug 2013 Posts 473 EE 100% (216) USA	Posted: 1/18/2017 4:30:35 PM EDT [#18] Quote History Originally Posted By Scorejr: <img src="" /> Also used Aervoe. View Quote +1. would you be willing to break down the colors you used? Stencils bought or hand made? that is one of the best rattle can jobs I have seen! Well done, sir.

Et2ss Member Joined Feb 2007 Posts 8809 EE 100% (38) SOM	Posted: 2/5/2017 2:04:13 PM EDT [Last Edit: Et2ss] [#19] Quote History Originally Posted By TheTacticalCoyote: View Quote View All Quotes View All Quotes Quote History Originally Posted By TheTacticalCoyote: Originally Posted By TheTacticalCoyote: That looks awesome! Less is more

Unruely Joined Dec 2008 Posts 53 EE 100% (1) WV, USA	Posted: 2/21/2017 1:23:26 PM EDT [#20] 20170220_194203

Big_Brakes Anger is a Gift Joined Jun 2010 Posts 494 EE 100% (227) LA, USA	Posted: 2/22/2017 10:40:36 PM EDT [#21] Weekend project on my beater. Attached File Attached File Attached File Attached File Attached File
	"Prostitution is a far more ethical and moral way to make a living than holding public office."

Aeneas2020

Bit-Brit

Joined Jul 2011
Posts 4279
EE 100% (37)

FL, USA

Posted: 3/1/2017 8:51:45 PM EDT

[#22]

So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears

. This was done with some krylon camo paint...some old black paint i had lying around and sharpie

p.s. sorry for the poor image quality on the 2nd photo

Dextra gladius, leva scutuum, corpore honor. "In the right hand the sword, in the left the shield, in ourselves honor;"

SecretSquirell

Member

Joined Apr 2009
Posts 49983
EE 100% (26)

IL, USA

Posted: 3/2/2017 1:50:33 AM EDT

[#23]

Quote History

Originally Posted By Aeneas2020:
So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears

. This was done with some krylon camo paint...some old black paint i had lying around and sharpie

https://www.AR15.Com/media/mediaFiles/276205/shotty-reverse-156913.jpg

https://www.AR15.Com/media/mediaFiles/276205/shotty-156914.jpg

https://www.AR15.Com/media/mediaFiles/276205/shotty-close-up-156912.jpg

p.s. sorry for the poor image quality on the 2nd photo

View Quote

Very interesting.

Squire
"Our Costa, who art in Wyoming, thy beard come, thy will be done on the range as it is on the internet" ozzie839
I survived ARFbortion2016 and all I got was this stupid sigline

LoneWolf545

http://www.xring.com/

Joined Nov 2001
Posts 12285
EE 100% (2)

GA, USA

Posted: 3/2/2017 10:20:43 AM EDT

[#24]

Quote History

Originally Posted By BigBrakes76:
Weekend project on my beater.

https://www.AR15.Com/media/mediaFiles/246611/IMG-4107-152195.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4117-152196.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4119-152197.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4140-152198.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4141-152199.JPG

View Quote

I like this, it's very similar to what I've been planning for my next paint job, although I'm planning on a different shade of green.

This is my signature. There are many like it, but this one is mine.

beitodesstrafe

Engineer

Joined Nov 2007
Posts 1814
EE 100% (91)

VA, USA

Posted: 3/2/2017 7:14:34 PM EDT

[#25]

Quote History

Originally Posted By SecretSquirell:
Very interesting.

View Quote View All Quotes

View All Quotes

Quote History

Originally Posted By SecretSquirell:

Originally Posted By Aeneas2020:
So I took the fact that I got this old 870 for a good price and i've just been messing around with it. For a while now i've wanted to try out an "old type face" type look on a gun so I figured why not give this a try. It's not perfect but it proved to be a good test bed for future projects. I'm hoping it will look really nice as it wears

. This was done with some krylon camo paint...some old black paint i had lying around and sharpie

https://www.AR15.Com/media/mediaFiles/276205/shotty-reverse-156913.jpg

https://www.AR15.Com/media/mediaFiles/276205/shotty-156914.jpg

https://www.AR15.Com/media/mediaFiles/276205/shotty-close-up-156912.jpg

p.s. sorry for the poor image quality on the 2nd photo

Very interesting.

Yeah! That is crazy, but I like it!

US Navy

dalynchmob Joined Feb 2013 Posts 300 EE 0% (0) IA, USA	Posted: 3/16/2017 8:44:48 AM EDT [#26] My Block II, rattle canned using a mix of Rustoleum and Krylon Camo paints:

Krusty783

I have a use for you.

Joined Sep 2012
Posts 960
EE 100% (16)

MO, USA

Posted: 3/26/2017 9:15:01 PM EDT

[#27]

Quote History

Originally Posted By Wormydog1987:
Completely redid my hunting AR.

16" Wilson Combat LW barrel
12" Midwest Industries G3 LWM m-lok handguard
Remington R-15 receivers
Aero Precision Ultra Lightweight extended mount
Geissele S3G trigger
Trijicon TR20-2 mildot
Mission First Tactical Minimalist stock
Ergo grip
2A titanium gas block
Spike's Tactical M16 bolt carrier
BADASS safety
BCM GF CH
LWRC enhanced bolt
Form 1 all titanium suppressor
Magpul trigger guard
Aervoe rattle can paint job

http://i416.photobucket.com/albums/pp247/wormydog1724/6FCC7BF5-CDA9-4054-B200-B016F372D4A9_zps1mpzcxrt.jpg
http://i416.photobucket.com/albums/pp247/wormydog1724/CA454696-DCEE-4825-9706-6FC3AA520B0B_zpsros6elc9.jpg
http://i416.photobucket.com/albums/pp247/wormydog1724/A8C5F9CB-0597-4BDC-9682-4EB5E2C7A408_zpspp0ifcbe.jpg

It weighs 7lbs 6oz now. I think it weighed over 9lbs before.

View Quote

It seems the older I get the more I become a fan of Woodland camo, especially when it's well executed on a rifle. Nice paint job.

Those who say it cannot be done should not interrupt those busy proving them right.

TerryH

Member

Joined Mar 2017
Posts 101
EE 0% (0)

AR, USA

Posted: 5/6/2017 7:29:07 PM EDT

[#28]

I had no clue there even was a Refinishing Forum. Very cool. I'm all about some paintwork on an AR.

Here's my House of Kolor Passion Purple Pearl basecoat with Sherwin Williams matte clear build. I work in a body shop. I have lots of things this HoK color. Apparently I have a purple thing going on. F1 chassis.

I also painted the wings on the charging handle and the bolt catch to mimic the naked titanium parts on the lower. All remaining hardware on the gun replaced with stainless.

Adjusting knobs on the Luth-AR MBA-3 stock also painted naked titanium.

I color filled the custom engraving on the flash can.

General pics...

AKASL

Joined Nov 2000
Posts 2315
EE 100% (72)

NH, USA

Posted: 5/7/2017 11:49:41 AM EDT

[#29]

Quote History

Originally Posted By TerryH:
I had no clue there even was a Refinishing Forum. Very cool. I'm all about some paintwork on an AR.

Here's my House of Kolor Passion Purple Pearl basecoat with Sherwin Williams matte clear build. I work in a body shop. I have lots of things this HoK color. Apparently I have a purple thing going on. F1 chassis.

https://c1.staticflickr.com/5/4164/34397354386_7680cf262e_b.jpg

https://c1.staticflickr.com/5/4169/34289386601_8092c25f66_b.jpg

I also painted the wings on the charging handle and the bolt catch to mimic the naked titanium parts on the lower. All remaining hardware on the gun replaced with stainless.

https://c1.staticflickr.com/5/4175/33628839663_dd75301c42_b.jpg

Adjusting knobs on the Luth-AR MBA-3 stock also painted naked titanium.

https://c1.staticflickr.com/5/4161/33610101363_b18bbb3cf8_b.jpg

I color filled the custom engraving on the flash can.

https://c1.staticflickr.com/5/4166/34289388331_4997f80b03_b.jpg

General pics...

https://c1.staticflickr.com/5/4178/34035347440_91c0f397a2_b.jpg

https://c1.staticflickr.com/5/4174/34289385891_2544cbb033_b.jpg

https://c1.staticflickr.com/3/2879/34378732106_c16faa6574_b.jpg

View Quote

With the upper receiver skeletonized like that do you get much gas blow back in your face??

TerryH Member Joined Mar 2017 Posts 102 EE 0% (0) AR, USA	Posted: 5/7/2017 2:28:54 PM EDT [#30] Quote History Originally Posted By AKASL: With the upper receiver skeletonized like that do you get much gas blow back in your face?? View Quote Does not. I don't see any difference in shooting this one and an AR with a regular receiver.

InternationalM Member Joined Dec 2013 Posts 2225 EE 98% (51) WV, USA	Posted: 5/16/2017 5:31:26 PM EDT [#31] First sponge camo job... Coyote, OD, and clear Alumahyde Before After

Deadsquiggles

Joined May 2015
Posts 201
EE 95% (21)

VA, USA

Posted: 5/20/2017 10:44:39 AM EDT

[#32]

A mix of Krylon Ultra Flat Khaki and Olive and Rustoleum Ultra Flat Brown and mesh laundry bag for pattern. Pretty happy with how it turned out, looks to be a good four season color mix for southeastern VA. I just need to convince myself to stop being a little bitch and do it to one of my ARs instead of just an old BB gun that was laying around.

The cardboard was the test run.

tboesche

Member

Joined Apr 2008
Posts 3868
EE 100% (2)

TX, USA

Posted: 5/24/2017 12:24:35 PM EDT

[#33]

Quote History

Originally Posted By BigBrakes76:
Weekend project on my beater.

https://www.AR15.Com/media/mediaFiles/246611/IMG-4107-152195.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4117-152196.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4119-152197.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4140-152198.JPG

https://www.AR15.Com/media/mediaFiles/246611/IMG-4141-152199.JPG

View Quote

Very nice

TheTacticalCoyote I Aim To Misbehave Joined Mar 2009 Posts 9204 EE 100% (202) UT, USA	Posted: 9/21/2017 2:22:44 PM EDT [#34] Attached File Attached File
	Originally Posted By bradpierson26: So I know you're a SF whore . . . . .

gck5150 Joined Mar 2006 Posts 1469 EE 0% (0) TX, USA	Posted: 9/24/2017 5:51:52 PM EDT [#35] Here's my first attempt at camo rattle canning on my Ruger American Rimfire stock. I'm pretty happy with it. Aervoe Earth Yellow base coat, stripes of OD, Field Drab, then some pine straw action (well... cut up broom bristles) with Earth Brown and Krylon Hunter Green.

IdahoHk416 Member Joined Jul 2008 Posts 1369 EE 100% (330) ID, USA	Posted: 10/6/2017 10:12:54 PM EDT [#36] Painted my Colt LE6920 a month ago using Duracoat aerosol Magpul FDE, and reassembled it last night. I painted the upper and lower receivers, the 15" Troy Alpha rail, and the flash hider. Attached File Attached File

DrafterDan Member Joined Oct 2017 Posts 7 EE 100% (3) AZ, USA	Posted: 10/14/2017 8:11:36 PM EDT [#37] a subtle approach, done by Desert Firearms in Phoenix

TheTacticalCoyote I Aim To Misbehave Joined Mar 2009 Posts 9222 EE 100% (202) UT, USA	Posted: 10/18/2017 1:34:51 PM EDT [#38] 1 by Two Sierra, on Flickr
	Originally Posted By bradpierson26: So I know you're a SF whore . . . . .

crzapy Member Joined Jan 2010 Posts 4132 EE 100% (1) TX, USA	Posted: 11/3/2017 4:57:01 PM EDT [#39] Attached File Attached File Attached File Attached File Attached File Paint all the things!
	"Having been legally declared part of the fruits and vegetables family, Hennessy is now WIC eligible." StripperHerder

Stbob238 Joined Apr 2007 Posts 106 EE 100% (26) IL, USA	Posted: 11/25/2017 11:44:25 AM EDT [Last Edit: Stbob238] [#40] I did this in woodland colors This is another color set with skull camo

tucansam Member Joined Feb 2004 Posts 4459 EE 100% (221) AZ, USA	Posted: 11/28/2017 1:52:38 PM EDT [Last Edit: tucansam] [#41] Quote History Originally Posted By crzapy: https://www.AR15.Com/media/mediaFiles/231252/20170827_143358-352191.JPG Paint all the things! View Quote Cobra Commander and Serpentor approve, as do I. ETA Pic thread, KG Gun Kote, first time using it. Attached File
	...for the People who once upon a time handed out military command, high civil office, legions — everything, now restrains itself and anxiously hopes for just two things: bread and circuses.

TannerG

Joined Jul 2017
Posts 94
EE 100% (5)

NC, USA

Posted: 3/3/2018 1:09:35 AM EDT

[#42]

Quote History

Originally Posted By IdahoHk416:
Painted my Colt LE6920 a month ago using Duracoat aerosol Magpul FDE, and reassembled it last night. I painted the upper and lower receivers, the 15" Troy Alpha rail, and the flash hider.

https://www.AR15.Com/media/mediaFiles/163482/IMG_3395-326408.JPG

https://www.AR15.Com/media/mediaFiles/163482/IMG_3399-326409.JPG

View Quote

This looks freakin great

The_Punisher I'm Eatin Peaches Joined Sep 2005 Posts 4020 EE 100% (234) FL, USA	Posted: 3/3/2018 2:44:12 PM EDT [#43]

TannerG Joined Jul 2017 Posts 98 EE 100% (5) NC, USA	Posted: 3/6/2018 10:55:41 PM EDT [#44] Its not professional but I think it turned out well.

INTrooper4255 Member Joined Aug 2005 Posts 1211 EE 100% (30) IN, USA	Posted: 3/9/2018 8:12:48 AM EDT [#45] My MRP is finished at the Cerakote applier and is heading back to me. Attached File

LA_357SIG Joined Jan 2007 Posts 6290 EE 100% (26) USA	Posted: 3/19/2018 6:37:15 PM EDT [#46] My Egyptian build.

INTrooper4255 Member Joined Aug 2005 Posts 1217 EE 100% (30) IN, USA	Posted: 3/19/2018 6:42:17 PM EDT [#47] Attached File

Danilo Joined Sep 2017 Posts 207 EE 100% (12) FL, USA	Posted: 4/19/2018 9:51:30 PM EDT [#48] Picked up a CZ 455 with the Manners Stock... I could not stand the green base, so I used some free time this afternoon to make it something I could live with. Rattle can, some brushes and some model paint, and a couple coats of matte clear. Works for me. Yesterday: Today:

SecretSquirell

Member

Joined Apr 2009
Posts 65454
EE 100% (26)

IL, USA

Posted: 4/20/2018 1:46:17 AM EDT

[#49]

Quote History

Originally Posted By Danilo:
Picked up a CZ 455 with the Manners Stock... I could not stand the green base, so I used some free time this afternoon to make it something I could live with.

Rattle can, some brushes and some model paint, and a couple coats of matte clear. Works for me.

Yesterday:
https://s5.postimg.cc/4hh4zcmyf/IMG_3354.jpg

Today:
https://s5.postimg.cc/j0oa0qsxz/IMG_3382.jpg
https://s5.postimg.cc/f4ay4rfo7/IMG_3384.jpg
https://s5.postimg.cc/6ysw6lz53/IMG_3385.jpg

View Quote

That's cool looking.

Without blood, it doesn't count!
"A gun, like any other source of power, is a force for good or evil, being neither in itself, but dependent upon those who possess it."

MrPlayer Member Joined Jul 2006 Posts 1307 EE 100% (41) USA	Posted: 5/17/2018 1:04:22 PM EDT [#50] Attached File

Refinishing Forum Picture Thread (Page 65 of 67)

Armory » Refinishing

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us