As most of you know, TNVC not only sells kit; we also design and manufacture kit for LE and Military customers. Drawing from our years of experience in these communities, we are always looking for innovative ways to solve problems. When a void exists, we fill it with an innovative, high quality solution. Keeping with this tradition, we are proud to offer the TNVC Base Jump Lanyard.



We started with the premise that the OPS Core Base Jump Helmet is one of the best available platforms for form, fit and function. However, due to the molded-in shroud, an operator cannot use a retention lanyard device to catch their ultra-expensive NVG’s, in the event the mount disengages from the helmet.

Unfortunately we have seen some DIY projects that advocate drilling holes and installing bolts through the helmet itself. Not only are these practices not approved by the manufacturer, voiding any warranty, they produce a danger to the wearer. In a ballistic helmet, these holes violate the structural integrity of the helmet and aid in the degradation of the ballistic fibers inside. In non-ballistic helmets, structural integrity can also be compromised and, placing a metal bolt where it might contact the head in a hard blow, well…you get the picture. Here at TNVC, we never endorse projects that can endanger the user, nor do the manufacturers.

Due to the Ops Core Base Jump Helmet’s extreme popularity among professional and commercial users, we recognized a need for a simple, efficient, and cost-effective lanyard. The design also had to be intuitive and require no modification to the helmet. The TNVC Base Jump Lanyard utilizes an off-the shelf Wilcox Retractable Lanyard (a popular, battle-proven, milspec device) threaded over a milspec webbing/ hook & loop strap. The strap ends are fed through the existing forward vent holes of the Base Jump Helmet and secured by the hook patches on the inside of the helmet. The double-sided micro hook/loop straps allow the Ops Core pads to be placed right over them without losing any adhesion. The retractable lanyard is secured tightly against the helmet shell and provides a very secure, low-profile NVG retention platform.

Our materials meet current Mil-Spec standards, right down to the thread used in the stitching. Best of all, the TNVC Lanyard is made in our facility, in America, by Americans.

We are proud to offer this newest product from TNVC. Now, operators have an option to drilling out expensive helmets, while still being able to protect their valuable NVG’s from hitting the deck.









http://www.tnvc.com/shop/tnvc-base-jump-lanyard/

Love it. Been needing a lanyard. Will be ordering one of these asap.

We've been receiving some Fast Ballistic helmets over the last few weeks. This IS a good sign.

Vic

YEA TEAM!

The race is on, who will cross the finish line first?

My SPIR or my OPS-CORE?

woohoo

Hopefully one will fly in my direction

If you look at the 4th picture down (where's it hanging from the helmet) you can see that it clips into the lanyard loop built into the PVS-14

So folks know, we ran out of black pretty quick and had the sew machines rev'd up this weekend. More will be shipping out this week!

Vic