Author
Message
SkyPup
Online
Posts: 1095
Feedback: 0% (0)
Posted: 4/2/2012 9:07:58 PM
[Last Edit: 4/2/2012 10:24:38 PM by SkyPup]

THE IMAGE ABOVE IS A PAID ADVERTISEMENT
I mounted my ITT PVS-14 onto my Thompson Center Carbine's Redfield 3-9X-50mm scope and it actually works out much better than I had expected it would.

Field of view and brightness is very very good.

I use this rifle as a hog & coyote sniper rifle and it has nailed many a hog with Barnes 70 grain TSX hand loads with obviously one shot!

I actually get a decent check weld on it and it is super light weight, even with the IR I850nm Illuminator and a Klarus 1,200 lumen dual Cree XML torch on top, it weighs less than 9 pounds.

Makes for a great stand sniper rifle as it shoots less than 1/2 MOA day in and now day out!





The NV view through the scope is actually much much better than my crummy photos show.

I need to get another PVS-14 from Vic so I can use my helmet for situational awareness while using the scope mount, or another IR laser.....
SkyPup
Online
Posts: 1096
Feedback: 0% (0)
Link To This Post
Posted: 4/2/2012 9:40:16 PM
Here is a little bit better representation of the view @ 225 yards to that oak tree where my game cam is located:

fordkicksass
Member
Offline
Posts: 755
Feedback: 100% (47)
Link To This Post
Posted: 4/2/2012 10:44:06 PM
Agreed, a monoc behind decent glass is excellent especially when an illuminator is in the mix. It's not fast and not great for shooting on the move, but I very rarely need either of those things. YMMV.
Ponyboy
Hi, I'm date Mike....nice to meet me
Offline
Posts: 22612
Feedback: 100% (122)
Link To This Post
Posted: 4/3/2012 1:47:05 AM
What is that mount that you're using to attach the mono to the scope?
You may all go to hell, and I will go to Texas

WildHogHunters.com
SkyPup
Online
Posts: 1097
Feedback: 0% (0)
Link To This Post
Posted: 4/3/2012 7:39:54 AM
It is the Night Optics Day Scope Monobloc Adapter.

Fits tight and locks on strong with no movement, pushing the release button instantly snaps the PVS-14 out of the way for day use or just easily remove it by releasing the lock down screws.



http://www.nightoptics-sales.com/proddetail.asp?prod=ADNPVS14NO6015
terry1
Member
Online
Posts: 601
Feedback: 100% (6)
Link To This Post
Posted: 4/3/2012 9:14:45 AM
[Last Edit: 4/3/2012 9:19:40 AM by terry1]
I have that same mount it works pretty well overall. The only issues I have with it is on rural area dark night it needs IR, Eye relief can be a a trick you need a longer scope rail if you can I use it on a Bushmaster ACR so have plenty of space up top, Its not real good for moving around or placing shots in a hurry more of a fixed stand type rifle. I would rather have a IR laser/eotech headmounted for stalking at night bigger/brigger FOV and faster shot placement. Other than that the system works well enough and I can put rounds on target at 250-300 yards pretty darn good. A true NV rifle scope is better but most guys on a fixed NV budget can get alot of use out of a 14 it does about everything.
SkyPup
Online
Posts: 1098
Feedback: 0% (0)
Link To This Post
Posted: 4/3/2012 9:38:34 AM
I've been using that 500mW low and 3.4 Watt high IR 850 flashlight with it and it works absolutely superb out to my max shooting range of 225 yards (I've got all my scopes, visible lasers, IR lasers, and scopes zeroed in @ 200 yards).

I have the LDI SPIR on order from TNVC and the ELR Torch-V IR too and will appreciate their ability to focus and constrict the IR beam for even better overall performance with scope NV applications. The 850nm IR flashlight works super great off the helmet when walking as it covers quite a large swath with its floody spill out over 200 yards on low, on high it covers triple that.

Even if you have a smaller diameter objective lens on your scope (my two Leopold VX-R 1-4X Pig Plexs have a 30mm objective as does my Burris XTR 1-4X), if you are using the IR it is not a problem getting positive ID and excellent signature longrange even on moonless or starless nights with clouds.

Only problem is if there is mist or fog shroud later on in the night as the air cools down, the PVS-14 actually does quite a decent job in low level fog but turning on the IR Illumination totally obliterates the view with serious flashback even on low power.

I will have to say that the PVS-14 is absolutely the most versatile NV instrument that can be put to a multitude of different applications.
terry1
Member
Online
Posts: 602
Feedback: 100% (6)
Link To This Post
Posted: 4/3/2012 10:15:33 AM
[Last Edit: 4/3/2012 10:16:05 AM by terry1]
I am using a Luma Laser IR Illum it is tiny in size and weight and very strong booms out there 500+ yards easy is focusable and adjustable power wise. The only draw back is I have noticed animals seem to spot the soft red glow it produces more than my ELR,Pulsar,night optics,M1 IIR Illum's.
SkyPup
Online
Posts: 1099
Feedback: 0% (0)
Link To This Post
Posted: 4/3/2012 10:29:02 AM
[Last Edit: 4/3/2012 10:29:34 AM by SkyPup]
That sounds like a great setup, a couple of my friends are using the Luma too.

Be sure to be careful with those IR lasers and Illuminators, once you get over about 500mW of output they become particularly dangerous to human eyesight.

At night your iris is fully dilated and the IR light does not cause your iris to constrict leaving all the IR light being focused onto your fovea at the center of your retina where 90% of your rods and cones photoreceptor cells are located for your primary central vision, even a short time of this causes damage that is permanent.

DO NOT shine IR lasers or Illuminators in anyones eyes!
b_rogers
60 percent of the time, it works every time..
Offline
Posts: 1555
Feedback: 100% (51)
Link To This Post
Posted: 4/3/2012 2:37:45 PM
Originally Posted By SkyPup:
That sounds like a great setup, a couple of my friends are using the Luma too.

Be sure to be careful with those IR lasers and Illuminators, once you get over about 500mW of output they become particularly dangerous to human eyesight.

At night your iris is fully dilated and the IR light does not cause your iris to constrict leaving all the IR light being focused onto your fovea at the center of your retina where 90% of your rods and cones photoreceptor cells are located for your primary central vision, even a short time of this causes damage that is permanent.

DO NOT shine IR lasers or Illuminators in anyones eyes!


Someone didn't tell these jarheads..

http://www.youtube.com/watch?v=41g6-B7kOzo
"Q" underground invention division applicant.
SkyPup
Online
Posts: 1102
Feedback: 0% (0)
Link To This Post
Posted: 4/3/2012 2:39:45 PM
Totally assinine....there is no replacing your retina....
Ponyboy
Hi, I'm date Mike....nice to meet me
Offline
Posts: 22623
Feedback: 100% (122)
Link To This Post
Posted: 4/3/2012 7:45:11 PM
Originally Posted By SkyPup:


Be sure to be careful with those IR lasers and Illuminators, once you get over about 500mW of output they become particularly dangerous to human eyesight.



You can do damage with a lot less than 500mW. Class I IR lasers are limited to .7mW. Class III IR lasers such as the PEQ2, PEQ15 or many other aiming lasers are 50mW. 500mW lasers can be used to catch stuff on fire.

You may all go to hell, and I will go to Texas

WildHogHunters.com
SkyPup
Member
Online
Posts: 1104
Feedback: 0% (0)
Link To This Post
Posted: 4/3/2012 8:03:41 PM
[Last Edit: 4/3/2012 8:41:33 PM by SkyPup]
10-4, I messed up and was just thinking of LED IR Illuminators, you are correct.

Many people are not aware of the hazards of IR Illuminators and just think lasers may be unsafe.
Nullius In Verba