User Panel
Originally Posted By astross89:
Thats $62 us. At that point just buy the pvs2 eyepiece for $65. It made my first build easy. View Quote View All Quotes View All Quotes Originally Posted By astross89:
Originally Posted By Brucifer:
Thanks, I can go with the Plossi eyepiece and the 50mm F1.4 for my first build. I want to power the cascade first. If I build a second I will use the correct eyepiece and either a heligon or a kowa. Yes I am still cheap. Waiting on the first cascade. It is still processing in the UK. Edit: What do you guys think about this? http://www.ebay.com/itm/181624664649?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Thats $62 us. At that point just buy the pvs2 eyepiece for $65. It made my first build easy. +1 Yukon's eyepieces are particularly shitty,because Yukon uses old soviet era intensifier tube, which has .47x magnification. Yukon compensates this by using short focal length oculars. i had a monocular from Yukon before i learned about cascade, the eyepiece was terrible. |
|
|
I want to give a shout out for Anchor Supply, Ordered 1/17 received 1/22 Fed-x across the pound was fast. The eyepiece side rubber is a little crushed, but should be OK. The 3x48 unc is very hard for me to find on the net. I did find one on the cover plate of a hard drive. The local fastener store carries 3x48 only as a set screw (no head). Decided to go with my 50mm f1.4 for first objective. found a FD adaptor on ebat so I won't have to disassemble my AE1. If I build a aluminum housing I will go with the CCTV.
Thanks to cj7hawk for staring this thread and hatti for the fast replies. Bruce |
|
|
|
I have my PVC version build. Will post pictures when I decide on a photo site.
http://s1379.photobucket.com/user/bsracer85/media/NV-PVC_zpslzhiyurm.jpg.html?o=0 http://s1379.photobucket.com/user/bsracer85/media/NV-PVC-parts_zpskezvcr5u.jpg.html?o=0 http://s1379.photobucket.com/user/bsracer85/media/2ndNV_zpsirvkybrx.jpg.html?o=0 I have been looking at the eyepieces from ART-IN-PART incase I build a Alu. model. What are your opinions on his lens quality. They look very dirty but are they scratched and can they be cleaned? Edit to add Pics Did something wrong |
|
|
How much tube life are you guys getting from these surplus cascades? I see gen 1 only has 1000 hours or so before the tube starts getting a reduction in illumination.
|
|
|
|
hello,
congrats on your first build,Bruce! looks really neat! i put the link to my images between img..../img, sometimes my browser shows pictures,but sometimes just links to them... can't tell why. may be the browser is to blame,may be board software. i have bought 4 PVS-2 eyepieces from Artinpart and although their housings show signs of intensive and careless use, the glass is clean and free from scratches. i would guess that they were used along with eye cups and the eye cups did protect rear glass. that is only my limited experience. seller declares that items are untested and MAY be defective. |
|
|
|
|
Will this work as the objective lens?
http://www.ebay.com/itm/321642845004?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT The 75mm lens looks great to me but I wounder what the small end will do to my field of view? Thanks for any input. |
|
|
Originally Posted By Brucifer:
Thanks for the help with the pictures. I am trying to come up with a mount for the batteries from a 3xAAA flash light to use the off/on switch. http://s1379.photobucket.com/user/bsracer85/media/Boom6mon_zpssht20sis.jpg. My house alarm. Could it be my post count? View Quote Good looking dog :) In photobucket, click on the "Direct" link to copy the photo's address. Then when posting a pic, select the photo button and paste that link in |
|
|
Greetings everybody, this is my first post,I just found this website and I am fascinated by all the info in this thread!
I bought a Varo cascade tube from a seller in Israel a couple of months ago and built a scope with the tube and the optics from an old binocular. I was able to use both the bino's objective and also the ocular with almost no modifications, the only disadvantage is that the whole assembly got somewhat long: https://www.flickr.com/photos/90601329@N02/16338553518/ It also includes a small infrared beam, made out of a couple of infrared leds, enough to illuminate up to 20 meters distance. The varo tube generates an almost excessive amount of green light, enough to leave you night blind on one eye for a while. It however generates a large amount of background noise, scintillation, as well, which limits visibility under low light conditions. The whole thing allows you to see somewhat, but only somewhat, better than the naked eye well adapted to darkness. I also bought a 8079 tube from the UK, but have not yet tried it. I am now starting to play with a different approach, using a CCD cam with digital signal processor and an old viewfinder from a camcorder. The whole stuff costs below $100 and first results are promising. |
|
|
Its been a while since I logged onto this thread. Since then I and my gunsmith built two of these units in machined aluminum housings with P8079 tubes. I did the proto-types and mock ups, he did the machining. We eventually upgraded to PVS-2 front and rear objectives. Then glued reticles to the front of our P8079 tubes. I eventually purchased a PVS-2 housing and needed parts for one of the tubes. I purchased a second tube and PVS-2 housing. I have since moved my two P8079 tubes and objectives to both PVS-2 housings and have them mounted on AR's. Here is one of the two. I cut the battery and oscillator compartments off the top of the PVS-2 housing, filled the opening in and put a flashlight on top for the battery holder.
This last fall I purchased a PVS-4 with 3rd Gen tube. I no longer need my original aluminum housing or lens and have put them up for sale on the Equipment Exchange - http://www.ar15.com/forums/t_7_172/1407660_DIY_Cascade_Night_Vision_Scope_Machined_Aluminum_Housing_w__Lens_For_Sale.html All that is need is a P8079 tube and batteries. |
|
|
Hi All,
I am getting further with my build now and not too far away from being finished I hope. I went with an aluminium housing in the end and took it out a few night ago to compare it with a set of early gen 3 PVS7s (not sure on the tube) that my friend has and we came to the conclusion that it was very comparable indeed. In-fact I would say that the p8079hp with the PVS2 lens was actually clearer. It also seems to be far more sensitive to IR light. I had a 5mw 780nm ir laser and it was far too bright to use. The only downside was that it had lots of static charges. When i did my prototype using the pringles can it was perfect and no shocks at all. I am guessing because the pringles can is foil lined with insulating cardboard on the outside it worked as a faraday cage. This wasnt intended but a bit of a fluke. Now that i have an aluminium housing. what is the best way to protect from static? Should i insulate the tube first, then cover in aluminium foil, then insulate, then place in housing? would the following anti static bags be a good idea for insulation? pink or metalic? or would you recommend something else? http://www.maplin.co.uk/p/anti-static-metallised-bag-150mm-x-250mm-n89hy?gclid=Cj0KEQiA1NWnBRDchObfnYrbo78BEiQA-2jqBRh1qtV2DhWPin0PoBbtOGAdyiX6mIe_1e6G4zHjZdwaAgCZ8P8HAQ http://www.maplin.co.uk/p/anti-static-esd-bag-250mm-x-150mm-n90hy?gclid=Cj0KEQiA1NWnBRDchObfnYrbo78BEiQA-2jqBaK5szKvRTJ0hOmwRSyvc2kY5laKe0tB9PA1WZ8FVjUaAnip8P8HAQ Thanks in advance and for all the help so far |
|
|
hi,bobsboy
connecting the negative wire to the metal housing may solve static charge problem. did you do it already? |
|
|
Hi Hatti,
I have not tried that, I will give that a go and let you know how I get on. Thanks for the advice, I really appreciate it. |
|
|
Originally Posted By wachtelhund:
Its been a while since I logged onto this thread. Since then I and my gunsmith built two of these units in machined aluminum housings with P8079 tubes. I did the proto-types and mock ups, he did the machining. We eventually upgraded to PVS-2 front and rear objectives. Then glued reticles to the front of our P8079 tubes. I eventually purchased a PVS-2 housing and needed parts for one of the tubes. I purchased a second tube and PVS-2 housing. I have since moved my two P8079 tubes and objectives to both PVS-2 housings and have them mounted on AR's. Here is one of the two. I cut the battery and oscillator compartments off the top of the PVS-2 housing, filled the opening in and put a flashlight on top for the battery holder. http://i127.photobucket.com/albums/p131/wachtelhund1/P2230004_zpsuytt1qso.jpg This last fall I purchased a PVS-4 with 3rd Gen tube. I no longer need my original aluminum housing or lens and have put them up for sale on the Equipment Exchange - http://www.ar15.com/forums/t_7_172/1407660_DIY_Cascade_Night_Vision_Scope_Machined_Aluminum_Housing_w__Lens_For_Sale.html All that is need is a P8079 tube and batteries. View Quote |
|
|
Hi its me again =)
So i finally got all my parts together, ironically the major problem was actually finding a proper housing. Eventually I ended up using dense carton postal tube. I installed the lens with the adapter and the 2 spacers that came with it. I needed no shimming Because the 2 spacers did that role already. http://www.aliexpress.com/snapshot/6531721992.html?orderId=66157179956674 Anyway I also noticed that the tube doesn't need to get power all the time, you can save much energy by turning it off for 5 seconds off and then for 5 on(repeatedly). Did anyone here used some sort of 555 based clocking or any other type of power control? Ill be posting some pics later on! |
|
|
|
Poking kooks with pointy sticks since 1981
FL, USA
|
Originally Posted By YuriFink: Hi its me again =) So i finally got all my parts together, ironically the major problem was actually finding a proper housing. Eventually I ended up using dense carton postal tube. I installed the lens with the adapter and the 2 spacers that came with it. I needed no shimming Because the 2 spacers did that role already. http://www.aliexpress.com/snapshot/6531721992.html?orderId=66157179956674 Anyway I also noticed that the tube doesn't need to get power all the time, you can save much energy by turning it off for 5 seconds off and then for 5 on(repeatedly). Did anyone here used some sort of 555 based clocking or any other type of power control? Ill be posting some pics later on! View Quote Probably does not really save a lot of power, as once fully charged, the amperage used is probably about the same whether letting it run, or letting it drain and then charging it up again. At least that would be my guess. |
Repeal the 17th Amendment.
A right should restrict the government, not obligate it! It is America's love of, rather than fear of, democracy which is the little lie that coats the poison pill and makes it sweet to swallow. |
Originally Posted By bobsboy2007:
Many thanks Hatti, I have tried that now and it worked. The build continues! :) View Quote View All Quotes View All Quotes Originally Posted By bobsboy2007:
Many thanks Hatti, I have tried that now and it worked. The build continues! :) Originally Posted By hatti:
hi,bobsboy connecting the negative wire to the metal housing may solve static charge problem. did you do it already? glad to hear that! please post some pics when finished! |
|
|
congrats on finishing your build!
by the way you already have one very good lens on your hands - it is Helios 85/1.5 (or even 85/1.2) M42 mount lens on your Cyclop gen1 scope. bad thing about it is M42 mount,incompatible with your housing. |
|
|
Originally Posted By hugh1:
Is your mount adjustable and what is it? View Quote View All Quotes View All Quotes Originally Posted By hugh1:
Originally Posted By wachtelhund:
Its been a while since I logged onto this thread. Since then I and my gunsmith built two of these units in machined aluminum housings with P8079 tubes. I did the proto-types and mock ups, he did the machining. We eventually upgraded to PVS-2 front and rear objectives. Then glued reticles to the front of our P8079 tubes. I eventually purchased a PVS-2 housing and needed parts for one of the tubes. I purchased a second tube and PVS-2 housing. I have since moved my two P8079 tubes and objectives to both PVS-2 housings and have them mounted on AR's. Here is one of the two. I cut the battery and oscillator compartments off the top of the PVS-2 housing, filled the opening in and put a flashlight on top for the battery holder. http://i127.photobucket.com/albums/p131/wachtelhund1/P2230004_zpsuytt1qso.jpg This last fall I purchased a PVS-4 with 3rd Gen tube. I no longer need my original aluminum housing or lens and have put them up for sale on the Equipment Exchange - http://www.ar15.com/forums/t_7_172/1407660_DIY_Cascade_Night_Vision_Scope_Machined_Aluminum_Housing_w__Lens_For_Sale.html All that is need is a P8079 tube and batteries. Yes, it is adjustable. Its an old Bausch & Lomb adjustable mount fro the 60"s. B&L scopes back then had no internal adjustments. The mounts provided the adjustment. Rifle shoot MOA groups with these mounts and the reticles that I glued to the front of the tube. |
|
|
David,
This post of yours was my first exposure to NV devices after I built my own from your instructions. Thanks for sharing. Since then, I bought a few thousand dollars worth of NV. Lately a few friends and I have spent evenings over the weekend viewing the night sky. We have seen many stars, planets, and satellites. We have also seen some things I can hardly begin to describe and have no real explanation for. Perhaps this deserves a thread of its own, but have you had any experiences like this as well? |
|
|
Maybe a dumb question, but will this work? Ordered my tube early this week, looking forward to the build.
http://whatacountry.com/PVS-2-Body-and-Objective-Lens.aspx |
|
|
The PVS-2 housing you have linked to at whatacountry will work great for your tube. However unless you bought an AN/PVS-2 specific tube you won't be able to use it as a rifle site unless you create your own. The tubes used for the AN/PVS-2 had a reticle bonded to the photocathode side (which is why the mount moves the whole scope to zero it). You will also need to either buy some extra PVS-2 parts (the HV oscillator cap, continuity block, and cap) to connect the tube or run a wire directly to the tube from the contact in the front compartment.
The PVS-2 lens is great and the housing is pretty well done so you've got a great start for a viewer you just have to do a little extra work or buy some extra parts. |
|
|
I like the looks of it, but by the time you buy all the pieces it is pretty expensive.
I actually had an epiphany while considering mounting everything. Has anyone mounted one in a 70mm telescope? I can score one for about $40 with a tripod. Nice end fittings could probably be utilized, built in mount, etc. |
|
|
OK, so i assembled everything and powered it up to give it a test run before I start shimming the tube in my pipe, and the image coming from my viewing lens is inverted....
take the view lens off, and the image coming from the phosphor screen is not inverted. What gives? |
|
|
Well, mine sorta up and running in test mode. I need to fine tune things. Honestly it is just too bright in any environment I can test right now.
OP, I have to say thanks, way cooler than I expected. |
|
|
Originally Posted By SAnuke84: OK, so i assembled everything and powered it up to give it a test run before I start shimming the tube in my pipe, and the image coming from my viewing lens is inverted.... take the view lens off, and the image coming from the phosphor screen is not inverted. What gives? View Quote What kind of lens did you use to view the screen? Normally you need something simple like a lupe - or just a magnifying glass. Sounds like you have a nifty inverting lens there - David |
|
In the land of the blind, the one eyed man is king - Erasmus.
|
Originally Posted By Sturmgewehr-58: David, This post of yours was my first exposure to NV devices after I built my own from your instructions. Thanks for sharing. Since then, I bought a few thousand dollars worth of NV. Lately a few friends and I have spent evenings over the weekend viewing the night sky. We have seen many stars, planets, and satellites. We have also seen some things I can hardly begin to describe and have no real explanation for. Perhaps this deserves a thread of its own, but have you had any experiences like this as well? View Quote But in the end, he was too disappointed it wasn't aliens, so decided it wasn't the secret aircraft being tested afterall. Anyway, I've seen "unlisted" satellites being adjusted in orbit, and stuff like that... I see a lot of early-evening meteors as well. I think a lot of cryptozoologists are reporting more sightings through NV too... That in itself might find a few more nocternal creatures. David. |
|
In the land of the blind, the one eyed man is king - Erasmus.
|
Originally Posted By bobsboy2007:
Hi All, I got to this stage a month or 2 ago, it was a bit rushed in the end as I really wanted to use it for a milsim (airsoft). There are defiantly changes that I want to make. The first is that the focus isn't 100% correct in that it tries to go beyond infinity, not by much but I'm guessing changing the distance between the lens and intensifier will fix this. The other issue is that i mounted the cmount plate backwards inside the tube so that the lens has to go into the tube. i did this to make it rock solid in case it gets knocked when in buildings going through mouseholes etc but the downside is that i cant switch lenses. But it focuses near and far so it works as required. It really is clear and in my opinion better than a friends pvs 7. He agreed and has now bought a pvs 14. I will do more to this in the future to make it better but here are some pictures in the mean time. Massive thanks for all the help so far especially to David and Hatti. I am already thinking about the next project. Maybe an MX10160 Any advise on this would be much appreciated. Being able to helmet mount would be good. http://airsoftteam.azexis.com/content/images/nods/1.jpg http://airsoftteam.azexis.com/content/images/nods/2.jpg http://airsoftteam.azexis.com/content/images/nods/3.jpg http://airsoftteam.azexis.com/content/images/nods/4.jpg View Quote neat! does it feed on coin cells and where is the switch? regarding head mountable monocular,i have built one recently. here is link to the thread - http://www.ar15.com/forums/t_6_18/445506_DIY_monocular___f9800c_tube_plus_PVS_5_optics.html and i must say... that NV business is addictive. |
|
|
Hi Hatti,
yes it uses a 2 x cr2032 battery holder (link below) it has an inbuilt switch, which is very small small switch on it. Although its small it is very square of its easy to feel in the dark. Its hard to see in the images but its at the 7 o'clock position. battery holder Yes this is very addictive and the cascade project has done its job in helping me learn the basics. But i am keen to do another project. But i feel that this project has probably created more questions for me :) I will do some more research before i ask more questions here as i am sure some of my questions are answered elsewhere. Although i didnt use it for this project as i wanted to see if i could get results with some basic tools, I do have a myford lathe and i would like to make the next project out of delrin and make it head mountable. I will either try and get a real rhino mount or see if i can utilise an airsoft clone L4G24 mount. I have wondered though whether its possible to put a gen 3 tube in a gen 1 device. Eg i see that the pulsar challenger comes in gen1 and gen3 options. But im sure its not that simple due to input and output window sizes etc. |
|
|
I have some questions for my next project if thats ok.
I hope to use an mx10160. Ideally head mounted so i would need fairly close to a 1:1 magnification. I think that in an ideal world i would use a pvs5 objective and eyepiece but getting hold of them in the UK is tricky. So i would like to use a 25mm f1.4 cctv cmount lens. Are there any disadvantages to this over a 50mm lens? Presumably the mounting distance to the input window on the tube is still 17.5 mm. With regards to an eyepiece, would it be possible to use a microscope eyepiece such as the item linked to below? http://www.aliexpress.com/item/WF10X-20mm-Biological-or-Stereo-Microscope-Ajustable-Wide-Angle-Eyepiece-Lens-with-Mounting-Size-30mm-Add/866383311.html Many thanks |
|
|
a 25mm CCTV lens is fine - Find the fastest you can, and ideally get a 4/3 model, or a 1" model. A 2/3 is next best and 1/3 will still work, but with substantial vignetting. A 25mm one will give you 40 degrees FOV, while a 50mm will make eyepiece selection difficult. Look for a 25mm PLOSSL lens for a cheap eyepiece - from a telescope - A 1.25" 25mm plossl will cost around $30 and will work well. Regards David. |
|
In the land of the blind, the one eyed man is king - Erasmus.
|
Many thanks David.
I shall try and find an appropriate lens |
|
|
Originally Posted By AusKahless:
Hello everyone, Just thought i would share a few pics of my cascade tubes humble beginnings, i have an 80mm aluminium tube on the way for the housing, i would have liked to try carbon fibre tubing for the housing as i like the look but it was just to costly to justify, so i settled for some smaller tubing that fits 4 AAs just nicely, a carbon fibre battery housing will have to do, the other lens in the picture is a Kowa 55mm f1 lens i picked up NOS, looks like a c/cs mount but it is slightly (1mm) larger, testing with a lamp and wall the projected image looked in focus about 12.5 mm from output lens, so similar to cs i guess, i am working in autocad inventor to make 3d printed ends that hold the pvs-2 occular and the objective, my plan is to have an externally threaded tube hold the objective lens and an internally threaded tube on the end cap so i can have some kind of manual focus with the objective lens, will see how that pans out since my cad skills are a bit rusty. I wont even mention what i paid for the pvs-2 eyepiece, seems they are getting a bit rare outside the US. Thanks for starting this thread David, i am now officially hooked on NV, and thanks everyone else that has posted, i read the whole thread and gleaned ideas off everyone, i will post more picks of completed scope soon. htttp://i62.tinypic.com/k3gba.jpg http://i60.tinypic.com/2vvl1tx.jpg View Quote hi i had a Kowa 55/1 lens for some time,liked it a lot. it was very bright, but its image size was a bit insufficient for 25mm photocathode,therefore little vignetting was present. i would estimate its image plane size around 20mm. also 12.5mm distance seems to me too big, maybe it is not infinity focus,because object (the lamp) was too close? usually these lenses have 5...8mm back focal distance. try to focus outside scene image on a wall that is opposite to a window. good luck with your build! |
|
|
Heya Hatti,
Yes you are correct, i just focused the image of one end of the house to the other about 15 metres and the focal plane was around what you said, looked to be 6-7mm, thanks for that, i guess my bedside lamp was just to close. I really like the Kowa lens it feels so solid, just something about it, makes my $40 fotasy 50mm lens from amazon feel like cheap junk (probably because it is), thanks again! |
|
|
AusKahless,
Does Autodesk Inventor support AutoLISP code? If so, I have some routines that will automatically generate threads conforming to most standards, single or multi-index - Very useful if you're 3D printing threads ( including with the inside-threads routine allowing for offset for 3D printing to ensure correct clearances ). PM me if that would help - last I tried them on Autodesk, it wasn't perfect ( some of the functions have changed ) but the remaining steps could be completed manually still. Regards David |
|
In the land of the blind, the one eyed man is king - Erasmus.
|
Originally Posted By bobsboy2007:
I have some questions for my next project if thats ok. I hope to use an mx10160. Ideally head mounted so i would need fairly close to a 1:1 magnification. I think that in an ideal world i would use a pvs5 objective and eyepiece but getting hold of them in the UK is tricky. So i would like to use a 25mm f1.4 cctv cmount lens. Are there any disadvantages to this over a 50mm lens? Presumably the mounting distance to the input window on the tube is still 17.5 mm. With regards to an eyepiece, would it be possible to use a microscope eyepiece such as the item linked to below? http://www.aliexpress.com/item/WF10X-20mm-Biological-or-Stereo-Microscope-Ajustable-Wide-Angle-Eyepiece-Lens-with-Mounting-Size-30mm-Add/866383311.html Many thanks View Quote hi Bobsboy they are available on ebay and they are cheap,although cosmetic condition is quite bad,they are still fully functional. http://www.ebay.com/itm/PVS-5A-Goggle-Lens-PVS5-night-vision-Mil-spec-Focus-lens-80063-no-frame-2-/281416428578?hash=item4185b9ec22 http://www.ebay.com/itm/PVS-5A-Goggle-Lens-PVS5-night-vision-Mil-spec-Focus-night-vision-lens-/271696836193?hash=item3f4264b661 regards Andris. |
|
|
Thanks Andris, but unfortunately they won't ship to the United Kingdom :(
For the objective lens I am torn between a computar 25mm f1.3 lens but its 2/3 or a pentax 25mm f1.4 for 1". Or one of the cheapy Fujian 25mm f1.4 lense but they are for 1/2 sensor, however they do seem popular with the 4/3 community. All are c-mont for the eyepiece i have a 25mm 1.25" telescope eyepiece. But am also considering a 27mm 1.25" eyepiece that has a diopter. But this wont give me a true 1x magnification. Because i dont need glasses, i am considering using the 25mm eyepiece and not having adjustement, In the past i have found the eye focus a pain rather than a help. http://www.rothervalleyoptics.co.uk/antares-27mm-cross-hair-kellner-eyepiece-125.html I am leaning towards using commercially available lenses rather than the pvs-5 simply because i am considering selling the delrin housings i make (to team mates who have shown an interest) and a reliable supply of lenses would be useful. |
|
|
this may help (pdf below). From what i have read, the gold pad is the positive terminal and the body is the negative. A cr123a (3V) battery is a good power source.
http://www.nightvision.com/products/files/2005914850170.mx10160_f9800_domestic.pdf The pdf also has some measurements regarding how recessed the input and output windows are. I am doing a similar gen 3 project as you so please keep us updated with your progress. |
|
|
Originally Posted By bobsboy2007:
this may help (pdf below). From what i have read, the gold pad is the positive terminal and the body is the negative. A cr123a (3V) battery is a good power source. http://www.nightvision.com/products/files/2005914850170.mx10160_f9800_domestic.pdf The pdf also has some measurements regarding how recessed the input and output windows are. I am doing a similar gen 3 project as you so please keep us updated with your progress. View Quote Thankyou bobsboy, that is very helpful, i am not sure yet which route to take with a gen 3 tube, i want it to be head mountable as well as be able to put it on my Howa .243, ive been considering getting a fake pvs-14 and adapting it or Davids DBT-44 printed housing is looking mighty fine, both routes look like they would take some fitting and tuning, which keeps it fun and i will probably stick to c-mount lenses and plossl eyepiece lenses, but yeah i will keep you updated (with pics) for sure. Thanks again man! |
|
|
These lenses look for pretty good value considering their speed,
both for 1 inch sensor, so around 16mm diameter, c mount, might loose a bit of image on gen 3 tube, but so fast. http://www.rmaelectronics.com/goyo-optical-gmv42595mc-1-25mm-f0-95-manual-iris-c-mount-lens-m40-5-x-p0-5-filter-thread/ And http://www.rmaelectronics.com/senko-vfa2595h-1-25mm-f0-95-manual-iris-c-mount-lens-1-3-megapixel-rated/ Also an excellent list of fast lenses here. https://en.m.wikipedia.org/wiki/Lens_speed#Fast lenses |
|
|
They look really good. And thats a handy list to have.
A bit pricey for me at the moment. And because I will be using this for airsoft and I bash my head alot in cqb, meaning that the lens will probably be taking a fair bit of impact impact, I have got a pentax f1.4 25mm lens. Its for a 1" sensor and is fairly cheap second hand. Because they are all cmount i am going cheap to start with and will upgrade later. I think the most tricky bit of the build will be the eyepiece. What are your plans regarding this? What are you going to make your housing from, i'm goint to try delrin. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.