User Panel
[#2]
Originally Posted By DigDug:
Thanks for the info. When submitting the form 1 originally months ago the above message was no where to be found. I looked through all the pages of the application form and didn't see anything added, but I just tried to triple check and it looks like the site is down. Can't log in at all now. Is there a phone number or email address for Ted Clutter? Otherwise I will just call Gary and find out what is up. Thanks very much for your response!!! View Quote That info has been around since at least Sep 2013, but it's not on the eForms site anywhere. It came out in an eForms bulletin in Sep '13, again in Dec '13, and may be in others since then. I know I referenced it in the original Visual Guide. Doesn't matter now, it's already been done. Here is the info about contacting Ted. |
|
|
[#3]
|
|
|
[Last Edit: DigDug]
[#4]
Originally Posted By BigWaylon:
And just for reference, here's what my one disapproval looked like after I requested they cancel it. http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/000FE447-9747-426F-ADE4-DED61F165C0F_zpsgpiont2q.png And then there was a 5th page to the form that included the reason: http://i751.photobucket.com/albums/xx151/thegreghorton/Mobile%20Uploads/3E70B387-1FA9-49BB-A214-0B1699B7A791_zpssibslhqv.jpg View Quote I just triple checked the last page of the application and there isn't any info on it and I don't have a control number assigned to the request. Very odd. No approval or disapproval and the watermark on the form still says submitted. I just fired off an email to see what info I can find out. The atfonline site seems to be acting very twitchy now. Throwing login errors sometimes. Thanks! |
|
"Life is a comedy for those who think... and a tragedy for those who feel" Horace Walpole
"None of you seem to understand. I'm not locked in here with you, you're locked in here with me!" Rorschach |
[Last Edit: BigWaylon]
[#5]
Originally Posted By DigDug:
I just triple checked the last page of the application and there isn't any info on it and I don't have a control number assigned to the request. Very odd. No approval or disapproval and the watermark on the form still says submitted. I just fired off an email to see what info I can find out. The atfonline site seems to be acting very twitchy now. Throwing login errors sometimes. Thanks! View Quote The control number is the same as the permit number. You should have that either in an email, or when you're looking at the list of your forms in eForms. As I mentioned to another poster above this, it's not the Internal Control Number you see in eForms. (I do have one F1, out of a dozen or so, that didn't get a control/permit number...but I thinks it's rare) |
|
|
[#6]
Thanks, looks like I just need to sit tight and continue the waiting game. I was really worried that I forgot something.
|
|
Proud Member of Team Ranstad
|
[#7]
I'm working on getting my trust set-up. I should have it back and be able to e-file next week. My plan is to SBR one of my current AR's, a pinned 14.5. The eventual plan is to get a 10.3 upper but between the cost of the trust and the stamp, that probably won't be for a while. What I want to do in the meantime, once it's approved, is to remove the pinned A2X and just install a standard A2 flash hider on the 14.5" barrel. Since, the 14.5 would be the first configuration, I would need to put 14.5 for the barrel length?
|
|
|
[#8]
Originally Posted By HD2006:
I'm working on getting my trust set-up. I should have it back and be able to e-file next week. My plan is to SBR one of my current AR's, a pinned 14.5. The eventual plan is to get a 10.3 upper but between the cost of the trust and the stamp, that probably won't be for a while. What I want to do in the meantime, once it's approved, is to remove the pinned A2X and just install a standard A2 flash hider on the 14.5" barrel. Since, the 14.5 would be the first configuration, I would need to put 14.5 for the barrel length? View Quote Yes go with 14.5. Once you get the stamp back for the lower you can swap uppers whenever you like. |
|
I'm a miserable fuck, that's why.
|
[#9]
Originally Posted By mizzarley:
Yes go with 14.5. Once you get the stamp back for the lower you can swap uppers whenever you like. View Quote View All Quotes View All Quotes Originally Posted By mizzarley:
Originally Posted By HD2006:
I'm working on getting my trust set-up. I should have it back and be able to e-file next week. My plan is to SBR one of my current AR's, a pinned 14.5. The eventual plan is to get a 10.3 upper but between the cost of the trust and the stamp, that probably won't be for a while. What I want to do in the meantime, once it's approved, is to remove the pinned A2X and just install a standard A2 flash hider on the 14.5" barrel. Since, the 14.5 would be the first configuration, I would need to put 14.5 for the barrel length? Yes go with 14.5. Once you get the stamp back for the lower you can swap uppers whenever you like. Thanks for the info. After thinking about it for a while, I've decided I don't really have a need to hold onto the 14.5" barrel since I have three other pinned 14.5" AR's. I think I'm going to go with 10.3 for the initial barrel length. Does it matter how long a lower is registered as an SBR before you actually build it? I would think not but I guess it could. I'll probably either have the current pinned barrel cut down or sell it. But it could be a few months after the form 1 is approved before it's built into an SBR. |
|
|
[#10]
Originally Posted By HD2006:
Thanks for the info. After thinking about it for a while, I've decided I don't really have a need to hold onto the 14.5" barrel since I have three other pinned 14.5" AR's. I think I'm going to go with 10.3 for the initial barrel length. Does it matter how long a lower is registered as an SBR before you actually build it? I would think not but I guess it could. I'll probably either have the current pinned barrel cut down or sell it. But it could be a few months after the form 1 is approved before it's built into an SBR. View Quote View All Quotes View All Quotes Originally Posted By HD2006:
Originally Posted By mizzarley:
Originally Posted By HD2006:
I'm working on getting my trust set-up. I should have it back and be able to e-file next week. My plan is to SBR one of my current AR's, a pinned 14.5. The eventual plan is to get a 10.3 upper but between the cost of the trust and the stamp, that probably won't be for a while. What I want to do in the meantime, once it's approved, is to remove the pinned A2X and just install a standard A2 flash hider on the 14.5" barrel. Since, the 14.5 would be the first configuration, I would need to put 14.5 for the barrel length? Yes go with 14.5. Once you get the stamp back for the lower you can swap uppers whenever you like. Thanks for the info. After thinking about it for a while, I've decided I don't really have a need to hold onto the 14.5" barrel since I have three other pinned 14.5" AR's. I think I'm going to go with 10.3 for the initial barrel length. Does it matter how long a lower is registered as an SBR before you actually build it? I would think not but I guess it could. I'll probably either have the current pinned barrel cut down or sell it. But it could be a few months after the form 1 is approved before it's built into an SBR. Nope there is no time limit so you can take your time and build exactly what you want. |
|
I'm a miserable fuck, that's why.
|
[Last Edit: benny429]
[#11]
This may be a stupid question...
I'm and 01 FFL, (my name is on the license) I would assume since I am only an 01, I would check "No FFL", too. ETA- I guess that was more of a statement than a question. |
|
|
[#12]
Thanks for the guide. Just filed my first Form 1. No issues using Firefox.
|
|
|
[#13]
|
|
|
[#14]
Originally Posted By AlabamaPaul:
It would depend on "who" the applicant is... View Quote View All Quotes View All Quotes Originally Posted By AlabamaPaul:
Originally Posted By benny429:
This may be a stupid question... I'm and 01 FFL, (my name is on the license) I would assume since I am only an 01, I would check "No FFL", too. ETA- I guess that was more of a statement than a question. I will be using a trust. And as an FFL 01 Dealer - not a manufacturer - I would think it would be "No FFL" |
|
|
[#15]
Originally Posted By benny429: I will be using a trust. And as an FFL 01 Dealer - not a manufacturer - I would think it would be "No FFL" View Quote View All Quotes View All Quotes Originally Posted By benny429: Originally Posted By AlabamaPaul: Originally Posted By benny429: This may be a stupid question... I'm and 01 FFL, (my name is on the license) I would assume since I am only an 01, I would check "No FFL", too. ETA- I guess that was more of a statement than a question. I will be using a trust. And as an FFL 01 Dealer - not a manufacturer - I would think it would be "No FFL" |
|
|
[#16]
Originally Posted By AlabamaPaul:
If the item is being made for the trust, then no your FFL has nothing to do with it... View Quote View All Quotes View All Quotes Originally Posted By AlabamaPaul:
Originally Posted By benny429:
Originally Posted By AlabamaPaul:
Originally Posted By benny429:
This may be a stupid question... I'm and 01 FFL, (my name is on the license) I would assume since I am only an 01, I would check "No FFL", too. ETA- I guess that was more of a statement than a question. I will be using a trust. And as an FFL 01 Dealer - not a manufacturer - I would think it would be "No FFL" That's what I thought. |
|
|
[#17]
A friend just got a denial because he put his name in where his trust name should go . Does he need to restart the whole process and start over time wise or do they allow him to reapply without the wait ?
|
|
If I can make it through thisI can get through anything...
|
[#18]
Originally Posted By Easy_E: A friend just got a denial because he put his name in where his trust name should go . Does he need to restart the whole process and start over time wise or do they allow him to reapply without the wait ? View Quote |
|
|
[#19]
Originally Posted By AlabamaPaul:
He'll be out $200 while refund is being processed, but refile and email [email protected] with the control #s, serial #'s for each. It should be handled quickly. View Quote View All Quotes View All Quotes Originally Posted By AlabamaPaul:
Originally Posted By Easy_E:
A friend just got a denial because he put his name in where his trust name should go . Does he need to restart the whole process and start over time wise or do they allow him to reapply without the wait ? He is new to this and disappointed after the wait . Thanks for the info I will pass it along. |
|
If I can make it through thisI can get through anything...
|
[#20]
When you use eForm - do you actually get the paperwork mailed to you with stamp, or is electronic documentation all you get?
|
|
Sorry about the mayonnaise, guys.
|
[#21]
|
|
This world would be a better place to live if it weren't for people!
|
[#22]
Originally Posted By cda97:
Your stamp will be in electronic form only. View Quote View All Quotes View All Quotes Originally Posted By cda97:
Originally Posted By FALARAK:
When you use eForm - do you actually get the paperwork mailed to you with stamp, or is electronic documentation all you get? Your stamp will be in electronic form only. Yep. Just print it off for your records. |
|
Honestly, I think some of you that are bitching about gay threads are one shot of tequila away from sucking a dick. - .Palooka84
|
[#23]
Just went thru the form for a SBR. Got to the payment window and all it had was "close". Tried submitting payment about 6 times with the same popup. Finally after about 45 minutes a proper credit card payment window came up.
Paid and submitted and received a confirmation number. Merry Christmas! So, yes the site is still a bit wonky, but try - try again! |
|
|
[#24]
Thanks to OP and to all the contributors (those who answer questions) to this thread. First Form 1 submitted.
Is there a separate thread with detailed excuses to the wife as to why I'm voluntarily giving the .gov more money? |
|
|
[Last Edit: BluPhire86]
[#25]
First off, this guide walked me through my SBR form 1 process about a year and a half ago. Once again, thank you for that. I come to you today with another question.
How does one go about actually "making" a firearm? I want to build my own AK from a flat and know I need to do a form 1. On the second page of "add firearm" it asks to select "product type." My question is, what should I select if I am simply making a full-size rifle? Not making DD, MG, SBR, SBS, or Suppressor. Would I infact select AOW? Thanks for the help, Matt ETA: I found this PDF with a variety of questions and mine happens to be one of them. It appears I do not need to do a Form 1 if I do not intend on selling the rifle. I know you guys are not lawyers, but to you guys understand it as I do or otherwise? ATF pdf |
|
|
[#26]
Originally Posted By BluPhire86: First off, this guide walked me through my SBR form 1 process about a year and a half ago. Once again, thank you for that. I come to you today with another question. How does one go about actually "making" a firearm? I want to build my own AK from a flat and know I need to do a form 1. On the second page of "add firearm" it asks to select "product type." My question is, what should I select if I am simply making a full-size rifle? Not making DD, MG, SBR, SBS, or Suppressor. Would I infact select AOW? Thanks for the help, Matt ETA: I found this PDF with a variety of questions and mine happens to be one of them. It appears I do not need to do a Form 1 if I do not intend on selling the rifle. I know you guys are not lawyers, but to you guys understand it as I do or otherwise? ATF pdf View Quote |
|
|
[#27]
Thanks!
Matt |
|
|
[Last Edit: BigWaylon]
[#28]
Originally Posted By BluPhire86:
First off, this guide walked me through my SBR form 1 process about a year and a half ago. Once again, thank you for that. I come to you today with another question. How does one go about actually "making" a firearm? I want to build my own AK from a flat and know I need to do a form 1. On the second page of "add firearm" it asks to select "product type." My question is, what should I select if I am simply making a full-size rifle? Not making DD, MG, SBR, SBS, or Suppressor. Would I infact select AOW? Thanks for the help, Matt ETA: I found this PDF with a variety of questions and mine happens to be one of them. It appears I do not need to do a Form 1 if I do not intend on selling the rifle. I know you guys are not lawyers, but to you guys understand it as I do or otherwise? ATF pdf View Quote If you're not making an NFA item, you won't be filling out a Form 1. If you were making an AK SBR, it would be like making an SBR from an 80% lower...but that doesn't sound like what you're doing. ETA: didn't get to page 2 before responding... |
|
|
[#29]
When uploading your brand new trust via eforms, I assume I need to get it all notarized prior to scanning and making into a .pdf to upload is that correct?
Upon completion of that, I have approximately 15 pages to my Trust, I should have Exhibit 1 (additional Trustees) notarized too correct as I have named 3 people in my family? Exhibit 2 is the Declaration of Co-Trustee (I need to have all 3 sign separate documents, and upload those too? And lastly Assignment to my trust, this is where I will update with the same exact info I am submitting via atfonline.com/EForms is that correct, and upload that too once filled out and signed? Thank you for your help, I am trying to NOT get rejected and have to do all over. |
|
|
[Last Edit: thomasplaster223]
[#30]
I need to know the correct eform refund email address.
I called the NFA branch number on my pay.gov email and was verbally given [email protected] as the email to use to request a refund. I forwarded my pay.gov emails to that email address on January 21, 2016. There was no rejection email. The situation was I had two attempted Form 1 eform submittals form the same lower that accepted my payment but did not show a form in my account. I eventually succeeded in filing Form 1 for that lower - turned out I was attempting to use the incorrect model name for an Aero Precision lower - enter AP15 instead of AP 15. I filed several other Form 1s last December and January - didn't have any problems with them. Today I was checking on the status of the refunds and while searching on the internet saw where someone referenced [email protected] as the correct address to submit refund requests. Which email address is correct for an eform refund? ETA - Called ATF again and clarified that [email protected] is the correct address to request an eforms refund. |
|
MateFrio - "Evil is not a mental disorder. We cannot treat a misguided moral compass with drugs and institutions." 08/26/15
|
[#31]
Thank You. I had to attach my Trust in 5 parts due to size. I attached my Schedules A & B and a photo of my AR lower. I hope it works with the lower saying "Cal .223-5.56MM" and my request for 7.62 goes through. I added in description it was for 7.62 X 35 (300 Blackout).
|
|
|
[#32]
I cant seem to use Eforms. My Chrome browser doesnt work and apparently the newest version of IE is not supported either? Now wtf do I do?
|
|
Our adoption journey: mccoyaddoption.wordpress.com
|
[#33]
|
|
BETTER DEAD THAN RED
|
[#34]
So I think I made a mistake.
While filling out the line items I attached my trust form and my assignment form to the line item, and then I attached my trust form and my assignment form in the Forms window, and them paid and submitted. Now I guess that was a mistake??? Is this something that they will reject my application over? If so, then is this something that I can correct or will modifying an application cause it to go back to square 1 and require another $200? Or does this even matter and is it something they won't care about? |
|
BETTER DEAD THAN RED
|
[#35]
Originally Posted By motown_steve:
So I think I made a mistake. While filling out the line items I attached my trust form and my assignment form to the line item, and then I attached my trust form and my assignment form in the Forms window, and them paid and submitted. Now I guess that was a mistake??? Is this something that they will reject my application over? If so, then is this something that I can correct or will modifying an application cause it to go back to square 1 and require another $200? Or does this even matter and is it something they won't care about? View Quote So, you uploaded the same items twice? Shouldn't be an issue. 2X is better than 0X. |
|
|
[#36]
Originally Posted By BigWaylon: So, you uploaded the same items twice? Shouldn't be an issue. 2X is better than 0X. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon: Originally Posted By motown_steve: So I think I made a mistake. While filling out the line items I attached my trust form and my assignment form to the line item, and then I attached my trust form and my assignment form in the Forms window, and them paid and submitted. Now I guess that was a mistake??? Is this something that they will reject my application over? If so, then is this something that I can correct or will modifying an application cause it to go back to square 1 and require another $200? Or does this even matter and is it something they won't care about? So, you uploaded the same items twice? Shouldn't be an issue. 2X is better than 0X. Yep, uploaded them twice. I guess I'll wait and see what happens. I'll update if they reject me. Hopefully they won't. |
|
BETTER DEAD THAN RED
|
[#37]
Is anyone having issues downloading docs (trust) I'm using safari and chrome and none of them work
|
|
Every man is a warrior inside...but the choice to fight is his own
|
[#38]
Thanks for the tutorial.
I just filed my first ever Form 1. |
|
|
Trout Bum with a bad case of Black Rifle Disease
UT, USA
|
[Last Edit: out4trout]
[#39]
I submitted my first EForm 1 this evening with Google Chrome with no specular issues. I did have to click save a couple of times when the screen(s) hung up, but it was no problem after that. My Trust was 18.2 mb so I split it into two parts and ran a free pdf compression program I found on the internet. The first program I used did a good job with attachments and made both of them under the 3mb limit. Afterword when my submission was accepted and on my document list, I was surfing around the net and found a program that reduced my 18.2 mb document to 1.92 mb. Which means I would of only had to download one document instead of two. I saved 1.92mb compressed document and will use on the next SBR I'm going to submit. Type in PDF Compression programs in your browser and use the one from CVISION Smarter Document Capture.
Sorry, the wife is on the computer now and my damn phone will not let me make the link hot. It's easy to find. |
War is when the government tells you who the enemy is. Revolution is when you finally figure it out yourself. MOLON LABE !!!
|
[#40]
Submitted my Form 1 just a few minutes ago with Firefox and no issues.
This place has cost me more money they any other place on the internet. |
|
I am the LaRue Dillo porn photographer!!
http://www.youtube.com/watch?v=As0r3TIEuWE |
Trout Bum with a bad case of Black Rifle Disease
UT, USA
|
[Last Edit: out4trout]
[#41]
Originally Posted By out4trout:
I submitted my first EForm 1 this evening with Google Chrome with no specular issues. I did have to click save a couple of times when the screen(s) hung up, but it was no problem after that. My Trust was 18.2 mb so I split it into two parts and ran a free pdf compression program I found on the internet. The first program I used did a good job with attachments and made both of them under the 3mb limit. Afterword when my submission was accepted and on my document list, I was surfing around the net and found a program that reduced my 18.2 mb document to 1.92 mb. Which means I would of only had to download one document instead of two. I saved 1.92mb compressed document and will use on the next SBR I'm going to submit. Type in PDF Compression programs in your browser and use the one from CVISION Smarter Document Capture. Sorry, the wife is on the computer now and my damn phone will not let me make the link hot. It's easy to find. View Quote Just as a follow-up and a WTF.... Form 1 Electronically sent 4/3/16 via Google Chrome. Accepted with email acknowledgements of file submitted, of $200 charged to credit card, submission noted as in process etc.etc. Today 4/9/16 went to AFT site just for the hell of it to take a look. Site loaded slower than shit after I signed in. Came back with the message no documents on file WTF???? Signed out, cleared the computer cache, restarted, again, no documents on file??? And a message flashed that there was a Javascript issue. I go in and check. Sure as shit Google Chrome does not support Java. I dump Google Chrome. Loaded the Safari Browser and again pulled up the ATF EForm website. Sign in, SOB is still mega slow. Screen pops up now shows under my forms that my Form 1 is now in process. WTF??? I'm not sure but if you are having trouble with Google Chrome try dumping it and use Safari instead. In Safari I'm using Google (not Google Chrome) as my search engine.. |
War is when the government tells you who the enemy is. Revolution is when you finally figure it out yourself. MOLON LABE !!!
|
[#42]
Originally Posted By BigWaylon: This is covered in the original sticky (linked at the beginning of this one, or found directly in the Suppressor forum). You were never asked those questions, because they're not required for entity applications (which is all that eForms allows). Remember, the trust/corp is the applicant, not the trustee/etc. While technically you could ask if the trust was addicted to drugs, or dishonorably discharged, etc (and the answer is obviously "no" to all of them)...it's just not something that is required. This isn't specific to eForms, either. My paper forms are the same way. The back of most of my F1s and F4s, both electronic and paper, are blank. The exceptions are my first two paper F1s where I didn't know any better, and one paper F4 where the dealer wrote my trust name and "all lawful purposes" or something similar in box 15. The only exception to the back page being blank is an F4 for an SBR/SBS/MG/DD. In that case, the back has to be signed. When eForms had F4s, you actually had to print one out, sign it, scan it, and upload it as an attachment. There's actually a new version of both the F1 and F4, so that it's now 3 pages, but those versions aren't in eForms. Bottom line is you're good...nothing to worry about. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon: Originally Posted By mizzarley: Originally Posted By mongo001: When I view the PDF of the form, the questions are not answered on the second page. There is no where in this thread or the application that drives me to answer these questions. Did I miss something or is this not required? PDF of the paper form? Does that page have to do with CLEO signature and finger prints? Those are not needed/used when efiling. BigWaylon will probably know for sure. I'm just a hack at this. This is covered in the original sticky (linked at the beginning of this one, or found directly in the Suppressor forum). You were never asked those questions, because they're not required for entity applications (which is all that eForms allows). Remember, the trust/corp is the applicant, not the trustee/etc. While technically you could ask if the trust was addicted to drugs, or dishonorably discharged, etc (and the answer is obviously "no" to all of them)...it's just not something that is required. This isn't specific to eForms, either. My paper forms are the same way. The back of most of my F1s and F4s, both electronic and paper, are blank. The exceptions are my first two paper F1s where I didn't know any better, and one paper F4 where the dealer wrote my trust name and "all lawful purposes" or something similar in box 15. The only exception to the back page being blank is an F4 for an SBR/SBS/MG/DD. In that case, the back has to be signed. When eForms had F4s, you actually had to print one out, sign it, scan it, and upload it as an attachment. There's actually a new version of both the F1 and F4, so that it's now 3 pages, but those versions aren't in eForms. Bottom line is you're good...nothing to worry about. This scared the hell out of me for a second 'cause I ran into the same problem. But I ultimately got the form submitted message, and they charged my credit card. So now I guess I wait. |
|
"When you have made evil the means of survival, do not expect men to remain good...do not expect them to produce, when production is punished and looting is rewarded. Do not ask, 'Who is destroying the world?' You are." - Ayn Rand
|
[#43]
Is there anything in there where I can check status any further than seeing that my Form 1 was submitted? I see no indicators such as pending anywhere.
|
|
Proud Member of Team Ranstad
|
[#44]
Originally Posted By APPARITION:
Is there anything in there where I can check status any further than seeing that my Form 1 was submitted? I see no indicators such as pending anywhere. View Quote Nope. Submitted/In Process is the eForms equivalent of Pending. From there, it's only going to move to Approved/Disapproved. |
|
|
[#45]
Originally Posted By BigWaylon:
Nope. Submitted/In Process is the eForms equivalent of Pending. From there, it's only going to move to Approved/Disapproved. View Quote View All Quotes View All Quotes Originally Posted By BigWaylon:
Originally Posted By APPARITION:
Is there anything in there where I can check status any further than seeing that my Form 1 was submitted? I see no indicators such as pending anywhere. Nope. Submitted/In Process is the eForms equivalent of Pending. From there, it's only going to move to Approved/Disapproved. Ok, thanks. Could be anytime now and unfortunately I started thinking about it. I see the actions but that simply brings up the forms. I'll continue to wait. |
|
Proud Member of Team Ranstad
|
[#46]
Well, I asked too early. Received approval today. Submitted Jan 8th. Thanks to all whom have contributed to this thread and made the process so simple.
|
|
Proud Member of Team Ranstad
|
[#47]
Originally Posted By motown_steve:
Can you use Safari? I was able to submit a Form 1 today using Safari. View Quote View All Quotes View All Quotes Originally Posted By motown_steve:
Originally Posted By dnmccoy:
I cant seem to use Eforms. My Chrome browser doesnt work and apparently the newest version of IE is not supported either? Now wtf do I do? Ended using firefox without any issues |
|
Our adoption journey: mccoyaddoption.wordpress.com
|
[#48]
|
|
I have answered the demand with a cannon shot, & our flag still waves proudly from the walls - I shall never surrender or retreat.
- W B Travis |
[Last Edit: Wangstang]
[#49]
So I've got an 80% 9mm lower enroute. I'm considering using it for an SBR.
If I wanted to start on the Form 1 before it's been machined into a "firearm" as defined by the ATF... Who do I list as the maker/MFG? Am I free to designate a Model? Fair game on serial number so long as it includes numbers? Can I complete the form 1 prior finishing out the lower? I assume I can much like a form 1 suppressor is filed for prior to building. Thanks Wes |
|
|
[#50]
Originally Posted By Wangstang:
So I've got an 80% 9mm lower enroute. I'm considering using it for an SBR. If I wanted to start on the Form 1 before it's been machined into a "firearm" as defined by the ATF... 1. Who do I list as the maker/MFG? 2. Am I free to designate a Model? 3. Fair game on serial number so long as it includes numbers? 4. Can I complete the form 1 prior finishing out the lower? I assume I can much like a form 1 suppressor is filed for prior to building. Thanks Wes View Quote 1. Using eForms? If so, use FMI (letter "I", not number "1") as the Manufacturer Code (not Manufacturer Name). 2. Yes. 3. Yes. Arabic numerals and Roman letters...your basic 0-9 and A-Z. Only requirement is it must contain at least one numeral. 4. Yes. Although, they may ask for pics of the engraving...which is stupid. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.