Bought CCI mini mags a week ago. I was very excited to use them in my 10/22s as its the first time I've ever gotten my hands on mini mags! I've only heard good things about them

Anyway, all four of my BX-25s got the cartridges jammed just below the feed lips. Didn't matter which gun, each magazine jammed after ~5 rounds. One rifle has an 18in barrel and the other rifle has a 12.75in barrel.

The magazines are relatively new, but maybe they need cleaned? What am I missing? Both rifles continued to run flawlessly afterward with Winchester white box high velocity.

Notice the chunk taken out of the bullet, and there is a slight dent midway down the case, too.
" />

Should I post this in Magazines?

Check out this thread

http://www.rimfirecentral.com/forums/showthread.php?t=406160&page=3


This one as well-

http://www.rimfirecentral.com/forums/showthread.php?p=4165923&posted=1#post4165923


If all else fails send them back to Ruger by calling them,they will replace them at no charge

When mine were new they did the same now that they are a few years old they work fine.  It's definitely not the ammo though, but it is a PITA to get the stuck rounds out.

Thanks for the links

I also read that this was a problem on the older BX25 mags,not sure when the "fix" was addressed by Ruger or if there really was a fix by them

Mine all run flawless with what ever ammo i put in them.They are new current production mags

Let us know if you get them working with the mini mags

Mini mags have a shorter OAL then much of the other 22 ammo I have measured. In my BX mags the shorter rounds have a tendency to stack with the rim of a round over the rear of the round below it. This causes loaded mags not to present the top round correctly and jam. I solved the problem by not using mini mags in my BX mags.  Longer OAL 22 ammo runs flawlessly through them.