I like Federal Auto match, for accuracy in my 10/22s and it's inexpensive. Winchester 333 packs also shoot incredibly well in my .22s. ......all of them. CCI mini mags are my bulk hunting ammo.

Avoid Remington Thunderbolt. My 10/22 hates it, its dirty, and lots of duds.

Lately I bought a big box of Federals and so far no issues.

I've wanted to try the automatch but it always seems to be backordered at midway when i place an order and Walmart doesnt carry it.

CCI Minimag, in both hollow point and solid, works well for me. My gun also cycles the standard speed stuff pretty well. If yours doesn't, you might want to consider a couple of mods, starting with the bolt radius on the lower rear edge of the bolt.

Ive been using Federal Eagle 38gr hp. for the last 16 years. I never have a problem with missfires and they seem to be more accurate than the bulk pack stuff Ive tried.
They come 400 in a brick for around 19.00 here. I should have stocked up better a few years ago when they were 7.90 a brick.

I had problems with several different types of 22s but have settled on the Winchester 333 as it is running great in my guns and is affordable.

I use only CCI in my 10/22, as well as in my Marlin XT22TR. I got one of the Winchester 333 packs and in the first 50 rounds I had 17 that didn't even fire. Several took 4 hits without firing, I quit using it and gave the rest to my F-I-L.

I thought every gun was different. As in, what works for my 10/22 won't work for other guys 10/22.

Am I wrong?

I'd like to add to this, in my previous post I mentioned not using the Winchester 333 packs anymore. I'm not discounting the accuracy, I was able to get a 3/4" group at 50 yards, I quit using them only because they were unreliable in my guns (yes, that is plural). I refuse to buy ammo that only has a 66% reliability in my guns, just wouldn't make sense to do it. I'm guessing that I just got a bad pack because everyone else here seems to love them, but that one bad batch left a bad taste in my guns. I talked to a few people at the LGS and they asked me what condition my guns were in, so I brought them in the next day to show them, both my 10/22 and Marlin XT22TR had new hammer springs (the Marlin was brand new and I had just put a new spring in my 10/22) and my Colt Woodsman has the original spring. I still don't know why that box was a problem for me, it's the only box of ammo I have EVER had a problem with for any of my firearms.

IIRC the "Lubed" Lead 40gr has a thin wax coating that tends to gum up the barrel like the Remington CBee's do, but I could be wrong. Copper plated bullets won't gum up the barrel like the lead bullets CAN, I've never had any problems with any CCI rounds

It works pretty well in my 10/22. Not so well in my 22/45 or Beretta 21A

Yea...I read this a lot. "buy a bunch and see what works"..
Got two 10/22's to feed and one Buckmark.
Not that I'm short on ammo...just trying to add a brick or two every so often.
Got plenty of CCI MM if needed so I'll just pick up the Fed bulk.

Thanks guys

I've found CCI Minimags to be the most reliable ammo in my 10/22. I don't think I've ever had a malfunction with them.