User Panel
Does anyone know why they 30 round magazines aren't even showing up in the store anymore. They were just out of stock, now they're not even there.
|
|
|
Quoted:
CZ removes them when they go out of stock. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Does anyone know why they 30 round magazines aren't even showing up in the store anymore. They were just out of stock, now they're not even there. CZ removes them when they go out of stock. Last time they were out of stock they were still listed but with a quantity of 0 and an email notification option. They were pulled a few hours before their Facebook announcement that they had some in stock. They were then added with the in stock quantity. This is probably why the email notification never worked. |
|
anyone see a way to make a maglock? no detachable mags in cali on this
|
|
Anyone get one through the LE/MIL program? Did they contact you for payment or are you put on a waiting list?
|
|
|
Quoted:
Anyone get one through the LE/MIL program? Did they contact you for payment or are you put on a waiting list? View Quote I can't say enough good things about that program... The price and service is outstanding. They will put you on a list for when the next shipment comes in, but they try to grab one for you off the top of the pile if they can sorta deal. You will wait, but it likely won't be as long as waiting for one to shop up through your local shop. |
|
Quoted:
As it will be a pistol in CA I think you're out of luck anyways as the SSE was removed. Same situation for Glock Gen 4s ect. View Quote View All Quotes View All Quotes Quoted:
Quoted:
anyone see a way to make a maglock? no detachable mags in cali on this As it will be a pistol in CA I think you're out of luck anyways as the SSE was removed. Same situation for Glock Gen 4s ect. California has roster exemptions. Just need a mag lock. I can fab one I just need to get the lower in my hands to do so. |
|
Have we heard yet if the ATF approved the SMG stock as 922r Compliant for SBR usage? If not is CZ going to do whats necessary to make it complaint?
I'm really only interested in the gun right now if I can get the Actual SMG stock and From 1 the Pistol. AR stock on this gun will look goofy! If no SMG stock then Maybe later once I am done with other irons in the fire. Or if I can get a "Really Good Deal" on one |
|
No word yet. CZ have said before multiple times if they need to they will make the US parts and stocks needed for 922 if it is needed.
|
|
They are going to get filthy rich. I have no clue why it took so long for something like this to come out again? HK and Uzi in the 80s, then nothing but questionable and overly expensive clones for 30 damned years!!!
|
|
Shot mine for the first time today. Shoots great except for the safety being in the way. I think ill SBR it.
|
|
|
Quoted:
I picked mine up this past weekend at a gun show and filled out my form 1 yesterday. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Shot mine for the first time today. Shoots great except for the safety being in the way. I think ill SBR it. I picked mine up this past weekend at a gun show and filled out my form 1 yesterday. So how are you doing the over all length for the form 1? I want to get one and do this, but I don't see any adapters other than the arm braces. |
|
|
Quoted:
So how are you doing the over all length for the form 1? I want to get one and do this, but I don't see any adapters other than the arm braces. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Shot mine for the first time today. Shoots great except for the safety being in the way. I think ill SBR it. I picked mine up this past weekend at a gun show and filled out my form 1 yesterday. So how are you doing the over all length for the form 1? I want to get one and do this, but I don't see any adapters other than the arm braces. I used the factory length from the manual online 670mm which would be 26.3 but I did 26.5 inches. http://www.czub.cz/zbrojovka/cz-manual/Instruction-Manual-Scorpion-EVO-3-A1_en.pdf |
|
Buds had them up a little while ago. Their item number is 95398. I got mine ordered, went back to check stock and it showed out of stock, then after a few minutes it showed in stock. Just now it went back out of stock so who knows.
I've been let down by Buds before so I'm not holding my breath that I'll actually get one. |
|
I already asked CGW about that, and he said it would be an expensive undertaking to produce parts - he'd have to see a good demand before starting.
|
|
|
|
Quoted:
Anyone know if there is a 3 lug adapter for this yet? View Quote Haven't seen one yet, but Silencerco just added a Scorpion mount to their Octane options. http://www.store.silencerco.com/collections/handgun/products/thread-mount?mc_cid=e9e445ed24&mc_eid=ed26f5c211 |
|
Does anybody know where I might be able to pick up one of these below or at msrp? I saw Palmetto had them in stock earlier for 849 but wasn't able to pull the trigger on one. Any leads would be appreciated!
|
|
Quoted:
Haven't seen one yet, but Silencerco just added a Scorpion mount to their Octane options. http://www.store.silencerco.com/collections/handgun/products/thread-mount?mc_cid=e9e445ed24&mc_eid=ed26f5c211 View Quote View All Quotes View All Quotes Quoted:
Quoted:
Anyone know if there is a 3 lug adapter for this yet? Haven't seen one yet, but Silencerco just added a Scorpion mount to their Octane options. http://www.store.silencerco.com/collections/handgun/products/thread-mount?mc_cid=e9e445ed24&mc_eid=ed26f5c211 This will have to be my backup plan. I've emailed TROS to see if they can cut me a 3lug. |
|
|
Quoted:
Quoted:
Does anybody know where I might be able to pick up one of these below or at msrp? I saw Palmetto had them in stock earlier for 849 but wasn't able to pull the trigger on one. Any leads would be appreciated! Are you mil/LEO 650 plus 35 shippin Where? |
|
|
I got mine yesterday and need some help. How hard is it to move the pistol grip? I took the screw out, but it will not move? Does the nut have to come out as well? I tried to push it out with the screw, but did not want to damage the grip. Also, does the pistol come with the key ring loop I see in all of the pictures? Mine did not have one. Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help.
** Also could someone point me in the direction of the information used to successfully fill out a Form 1 on the Evo? |
|
Quoted: I got mine yesterday and need some help. How hard is it to move the pistol grip? I took the screw out, but it will not move? Does the nut have to come out as well? I tried to push it out with the screw, but did not want to damage the grip. Also, does the pistol come with the key ring loop I see in all of the pictures? Mine did not have one. Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. ** Also could someone point me in the direction of the information used to successfully fill out a Form 1 on the Evo? View Quote I tired to move my grip too...no good. And I'm afraid of damaging it. I think CZ should have done a little better on their manual. It says that the grip if moveable, and that the charging handle can be switched to the other side, but it doesn't tell you how! As far as the key ring loop, mine didn't come with one. I think I saw that people are putting their own on them. Also, if you look back a page or so in this thread, there is info on the form 1. |
|
Quoted:
I tired to move my grip too...no good. And I'm afraid of damaging it. I think CZ should have done a little better on their manual. It says that the grip if moveable, and that the charging handle can be switched to the other side, but it doesn't tell you how! As far as the key ring loop, mine didn't come with one. I think I saw that people are putting their own on them. Also, if you look back a page or so in this thread, there is info on the form 1. Thanks, but I was hoping someone would post the information that they successfully used to e-file a form 1 on the EVO or a link to the forum that had the information. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I got mine yesterday and need some help. How hard is it to move the pistol grip? I took the screw out, but it will not move? Does the nut have to come out as well? I tried to push it out with the screw, but did not want to damage the grip. Also, does the pistol come with the key ring loop I see in all of the pictures? Mine did not have one. Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. ** Also could someone point me in the direction of the information used to successfully fill out a Form 1 on the Evo? As far as the key ring loop, mine didn't come with one. I think I saw that people are putting their own on them. Also, if you look back a page or so in this thread, there is info on the form 1. Thanks, but I was hoping someone would post the information that they successfully used to e-file a form 1 on the EVO or a link to the forum that had the information. |
|
Quoted:
Quoted:
Quoted:
I got mine yesterday and need some help. How hard is it to move the pistol grip? I took the screw out, but it will not move? Does the nut have to come out as well? I tried to push it out with the screw, but did not want to damage the grip. Also, does the pistol come with the key ring loop I see in all of the pictures? Mine did not have one. Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. ** Also could someone point me in the direction of the information used to successfully fill out a Form 1 on the Evo? As far as the key ring loop, mine didn't come with one. I think I saw that people are putting their own on them. Also, if you look back a page or so in this thread, there is info on the form 1. Thanks, but I was hoping someone would post the information that they successfully used to e-file a form 1 on the EVO or a link to the forum that had the information. I had to take a rubber mallet to front of the grip to get it to move. I found it impossible to move by hand. It just took a few light taps. |
|
Emailed AAC today, they are working an adapter or piston for the 18x1
No anticipated timeline |
|
|
Ok so who am I calling for the leo/mil discount? My local CZ dealer? CZ directly?
Do they offer the discount to fire/ ems? Whats the price with discount? $650? Trying to order today. |
|
Cz directly.... just found out that the real thread is http://www.ar15.com/mobile/topic.html?b=6&f=48&t=435697&page=68
|
|
|
|
|
Quoted: Ive been trying to figure this out as well... View Quote View All Quotes View All Quotes Quoted: Quoted: Ok so who am I calling for the leo/mil discount? My local CZ dealer? CZ directly? Do they offer the discount to fire/ ems? Whats the price with discount? $650? Trying to order today. Ive been trying to figure this out as well... Call CZ directly. I tried several times to get through to the LEO/MIL rep, but could never get through. So, I just hit the option for the regular sales guy, and he was able to help. I'm not sure about fire/ems, but I believe that its just LEO and MIL. Would be worth a phone call to see if I'm wrong though. The price was $649 plus $35 shipped. They originally told me that it would be up to about 60 days, but I had it in about three weeks. |
|
Quoted:
I was wondering about this too. Does the locking bar clip have to be removed? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. I was wondering about this too. Does the locking bar clip have to be removed? Negative, Got my adapter today, it has some of the "fins" (whatever theyre called) removed, so it will screw on without any modification/removal of the clip.... |
|
Quoted:
Negative, Got my adapter today, it has some of the "fins" (whatever theyre called) removed, so it will screw on without any modification/removal of the clip.... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. I was wondering about this too. Does the locking bar clip have to be removed? Negative, Got my adapter today, it has some of the "fins" (whatever theyre called) removed, so it will screw on without any modification/removal of the clip.... Outstanding. Thank you for the info. Time to order. |
|
Quoted:
Outstanding. Thank you for the info. Time to order. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Finally, has anyone gotten one of the Silencerco Octane adapters yet? Will they work with the clip CZ uses to hold the factory muzzle attachment on? Thanks for all help. I was wondering about this too. Does the locking bar clip have to be removed? Negative, Got my adapter today, it has some of the "fins" (whatever theyre called) removed, so it will screw on without any modification/removal of the clip.... Outstanding. Thank you for the info. Time to order. NP, I figured I had some hacksaw/dremel project on my hands when I ordered it, but apparently the guys at silencerCo know what they are doing.. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.