Glock Information - Page 2

Handguns » Glock

Site Notices

Glock Information (Page 2 of 3)

GLOCKREAPER Joined Nov 2009 Posts 3280 EE 0% (0) ID, USA	Posted: 3/9/2010 2:17:29 AM EDT [#1] Originally Posted By Mountainmalitia: 4.5 is plenty for me. With the ghost rocket will it still be duty worthy or is it more of a range upgrade? I have not heard of any problems with the Ghost. It does have to be fitted. Other 3.5lb. connectors are drop-in.

GLOCKREAPER Joined Nov 2009 Posts 3286 EE 0% (0) ID, USA	Posted: 3/9/2010 10:02:28 PM EDT [Last Edit: GLOCKREAPER] [#2] The 25 and 28 are significantly different than other Glock's as they are direct blowback. The way Glock accomplishes this is by machining away the locking surfaces of the barrel hood.

GLOCKREAPER

Joined Nov 2009
Posts 3394
EE 0% (0)

ID, USA

Posted: 3/17/2010 11:20:18 PM EDT

[#3]

Originally Posted By: ricky_arthur

Glock .40 S&W chamber Changes (pic)
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
I've seen several people ask about reported changes to the .40 glock
chamber and feedramp but never saw the pics they were looking for so I
took one.
On the left is a gen 2 glock bbl bought about 1999. In the middle is
a gen 3 glock bbl bought this year and on the right is an aftermarket
bbl.

I measured the chambers, The after market bbl chamber measured
average .428. Both glock chambers measured average .432 so it appears
the chamber was left unchanged other than the modifications to the
chamber mouth and significant changes to the depth and width of the feed
ramp. The changes give better support to the case head as you can see.
Ricky

satellite Yo, homie. Is that my briefcase? Joined May 2006 Posts 2554 EE 100% (4) IN, USA	Posted: 3/25/2010 12:53:05 PM EDT [#4] For the reccommended six oiling points, what product do you all prefer to use?
	"Those who expect to reap the blessings of freedom must, like men, undergo the fatigue of supporting it." - Thomas Paine USMC 0622, 0628 2005-Present

Maynard

Shogun Named Marcus

Joined Jun 2001
Posts 7081
EE 100% (145)

OH, USA

Posted: 3/25/2010 7:19:13 PM EDT

[Last Edit: Maynard] [#5]

Copy/Paste from the Glock Recall Thread
http://glocktalk.com/forums/showthread.php?t=412093
Glock Pistol Upgrades
1990 Upgrade
Glock Model 19, 9mm Luger caliber, requires an upgrade for the
following serial numbers:
AN, BP, BR, BV, BW, BX, DL, DM, DN, DP, DR, DS, DT, DV, DW, DX, DY,
DZ

These pistols may have the potential of the action to malfunction as
follows:

1. The slide locking back on a full magazine.

2. Failure to lock into battery because the barrel lug drags on the
slide lock.

3. The magazine follower tips or sticks in the magazine tube.
1992, 6 part Upgrade
GLOCK, INC. Technical Bulletin #920403
April 1, 1992
Glock, Inc. announces a production change of the firing pin safety
system. This new firing pin safety system has been installed in all
production Glock pistols since November, 1991. A voluntary upgrade is
being offered to maintain the Glock tradition of ensuring that all of
our pistoils are up to the latest standards in 21st century Goock
technology.
Most importantly, the components of the new firing pin safety system
are not interchangable with the components of the old systam and Glock
will always strive towards maintaining this feature of interchangability
while working to ensure future interchangability.
The upgraded firing pin safety system consists of: the firing pin,
firing pin safety, the extractor, the spring loaded bearing and the
trigger bar. The upgraded system is applicable only to Glock pistols
with the following serial number ranges :
Glock 17 - alpha prefixes AA - WF

Glock 19 - alpha prefixes through WJ

Glock 20 - alpha prefixes through WW

Glock 21 - alpha prefixes through XL

Glock 22 - alpha prefixes through YA

Glock 23 - alpha prefixes through SK
The upgraded firing pin safety has a new surface finish making it
nearly 100% saltwater corrosion resistant. Also, after rigorous and
extensive testing, the new system proves to be more durable and has a
longer useful life. Here, as alwyas, Glock is working toward maintianing
its standard of perfection.
1993, G19 Upgrade
Glock Model 19, 9mm Luger caliber, requires an upgrade for all
pistols.
These pistols have the potential for an UNINTENTIONAL DISCHARGE of a
cartridge with the action open.
The Glock model 19 pistol slide has a bottom protrusion, whose
function is to push cartridges from the top of the magazine into the
chamber. When the pistol is jammed in a double feed situation, the slide
protrusion can come in contact with the primer of the jammed cartridge
and cause UNINTENTIONAL DISCHARGE while the action is open.
2000, G26/27 Recoil spring upgrade
Glock Model 26, 9mm caliber, serial numbers DGU, DHR DKU.
Glock Model 27, .40S&W caliber, serial numbers DGD, DGV, DHS,
DHT, DKV, DKW, DKX.
Mr. Don Bulver, warranty department of Glock, Inc., indicated the
recoil springs produced before September 1999 may shear off on some of
these pistols due to over hardness of the support tube.
Replacement springs will be distinguished by a vertical mark from
the center on the front polymer portion of outer ring of the guide rod
assembly, which will appear to be a mold line.
2002 Frame Upgrade – Rear slide rail
The GLOCK Corporation has identified a problem with a very small
percentage of GLOCK pistols produced between September of 2001 and May
of 2002. The specific problem that has been identified is the potential
of breaking a rear frame rail in pistols manufactured during this time
period. Within the specific range the breakage rate has been less than
0.0188%. So, while the actual percentage of rails reported broken is
within any accepted manufacturing tolerance, it is not an acceptable
situation to the GLOCK Corporation. It is also important to note that
under most conditions GLOCK pistols will continue to function with three
rails. A routine maintenance check after each time the pistol has been
taken out and used would immediately indicate if there is a problem.
We are, therefore, concerned that a limited number of customers will
not get the product we have promised them and what we have always
delivered, the very best pistol on the market, in short, a GLOCK.
For these reasons, we have made the decision that in the interest of
customer service, replacement frames will be offered to anyone who has a
firearm in this range and decides to take advantage of this offer. The
replacement frames will have identical serial numbers to our customer's
original firearm except the numeral 1 will be added as a prefix. If you
believe your firearm is within this range, please call 1-866-225-4098 to
take advantage of the ultimate in customer service.
Nothing less than the best for our customers is acceptable to GLOCK
and, as always, we will continue to work towards Perfection.
It appears that only serial numbers starting with "E", "GSSF", or
"USA" (American Hero’s Commemoratives) are affected. In general, the
chronological serial number set that has the prefix letters of "EKA"
through "EVR" inclusive appear to be the affected Glocks, regardless of
caliber. Three letters precede three numbers on a plate forward of the
trigger guard on the underside of the polymer frame. However, some
aberrations to this generalization have been reported by GTers. Reports
are that the affected Glocks were manufactured from September 2001 to
May 2002. So if you bought (or won a GSSF Glock) an "E" or "USA" series
Glock in September of 2001 up until the present day, you might have an
affected Glock. Unfortunately, Glock has not published a list. Hope this
helps, but again, if you are responsible enough to own a gun and can
read this, you are smart enough to check for yourself by calling Glock.

Once we were a Nation of Riflemen

GLOCKREAPER Joined Nov 2009 Posts 3584 EE 0% (0) ID, USA	Posted: 3/26/2010 4:00:45 AM EDT [#6] Originally Posted By satellite: For the reccommended six oiling points, what product do you all prefer to use? Glock's "official" answer is to use any oil designed for firearm use. The "unofficial" answer is BreakFree CLP. That is what Glock uses.

sharkbait Joined Mar 2001 Posts 2014 EE 100% (17) CO, USA	Posted: 4/1/2010 12:07:42 PM EDT [#7] upgraded recoil guide rod made of Polymer and stamped with the "1" on the rod –––– Posted above -are the upgraded recoil rods available separately to buy ? Thanks

GLOCKREAPER Joined Nov 2009 Posts 3756 EE 0% (0) ID, USA	Posted: 4/1/2010 7:54:21 PM EDT [Last Edit: GLOCKREAPER] [#8] Originally Posted By sharkbait: Posted above -are the upgraded recoil rods available separately to buy ? Yes. You can order one from anywhere and it will be the new one. They have been out for a few years now. You could call Glock USA and tell them you need a new recoil spring assembly and they should send you one free.

sharkbait Joined Mar 2001 Posts 2017 EE 100% (17) CO, USA	Posted: 4/2/2010 11:39:18 AM EDT [#9] Thank you

GLOCKREAPER Joined Nov 2009 Posts 3769 EE 0% (0) ID, USA	Posted: 4/2/2010 5:46:45 PM EDT [#10] You're welcome!

OEF5

Joined Jan 2010
Posts 35
EE 0% (0)

IN, USA

Posted: 4/22/2010 4:18:37 PM EDT

[Last Edit: OEF5] [#11]

In addition to the large article of 100,000 round test, there is a great Youtube video of a glock 10,000 round test. Just search Glock 10,000 1000 tourter test.

The instructer and a second shooter fire 10,000 1000 rounds out of his service pistol. I can't post the link right now because of work, I'll update it when I get a chance at home.

It's worth a watch for anyone who has doubts about these weapons. I owned a Glock 19 in 1991, and just bought a Gen 4 G22. Loved the old one and love the new one even better, just need some night sites on it.

Also in reference to the RTF if you have not really felt it, the Gen 4 is not nearly as aggressive as the RTF 3 is really really aggresive and had the opertunity before I bought my new one to feel all styles and liked the Gen 4 better.

One last thing I'll add to update is a set of pictures showing the different mag releases. I know it's larger on the Gen 4. You have great shots of all the other changes but missed that one. It's something to look at when buying a new Glock.

http://www.youtube.com/watch?v=0_JuF23qazI
Edited cause I got 0 happy and added the link. Two segments, enjoy.

diversmith

Member

Joined Apr 2002
Posts 2146
EE 100% (351)

NV, USA

Posted: 5/6/2010 7:32:04 PM EDT

[#12]

Originally Posted By GLOCKREAPER:
When installing the firing pin spring make sure the end with the most coils goes forward, over the spring cups. Also, make sure the split of the cups are oriented as seen in the bottom picture.

From Glocks Armorers Manual Addendum, "Firing Pin Spring...the end withthe most coils goes toward the spring cups" (this is in the parts orderform)

http://i37.tinypic.com/nbbv5h.jpg
http://i34.tinypic.com/o5tl3d.jpg

When installing the coil trigger spring be sure that it forms an "S" when viewed from the right side of the frame.

http://glockparts.com/uiimages/10010/trigwbar2.JPG

So I am assuming that when you run an aftermarket spring that has evenly spaced coils, it really won't matter? I have a Wolf and a Zevtech that are both even on coils...what to do????????????????

GLOCKREAPER Joined Nov 2009 Posts 4178 EE 0% (0) ID, USA	Posted: 5/6/2010 8:21:59 PM EDT [#13] Originally Posted By diversmith: So I am assuming that when you run an aftermarket spring that has evenly spaced coils, it really won't matter? I have a Wolf and a Zevtech that are both even on coils...what to do???????????????? If they are equal ends, then it doesn't matter. Just try to properly orientate the cups gap with the end of the spring.

XM15Carbine Joined Apr 2002 Posts 301 EE 0% (0) OH, USA	Posted: 5/9/2010 11:08:52 AM EDT [#14] Please feel free to use any of these along with my "glockSizes.gif" overlay of nines In a row 17 & 19 overlay 19 & 26 overlay And the 9mm sizes animated gif. XM15carbine

GLOCKREAPER Joined Nov 2009 Posts 4261 EE 0% (0) ID, USA	Posted: 5/16/2010 5:02:57 PM EDT [Last Edit: GLOCKREAPER] [#15] Glock factory manual safety options (not available in the U.S.)

GLOCKREAPER

Joined Nov 2009
Posts 4262
EE 0% (0)

ID, USA

Posted: 5/16/2010 5:16:38 PM EDT

[Last Edit: GLOCKREAPER] [#16]

GLOCK SAFETY LOCK

The GLOCK safety lock is one of the
latest developments from GLOCK.
The GLOCK safety lock is the first
safety cylinder lock for pistols worldwide
located conveniently in the back of the pistol
grip. The GLOCK safety lock ensures that the
weapon cannot be used or disassembled without
permission.

GLOCK’s modern key technology
permits the best possible adaptation to your
requirements. Group key solutions with hierarchic
structure are the intelligent answer to in any
conceivable organization structure found in public
law enforcement agencies.
THE KEY
As an option, the key can be used for both the pistol and the security
case. Each key is absolutely unique through state-of-the-art safety
technology. Group key solutions are also possible for use by law
enforcement agencies.

GLOCKREAPER Joined Nov 2009 Posts 4269 EE 0% (0) ID, USA	Posted: 5/16/2010 6:20:42 PM EDT [#17] G17DK Made for countries with minimum overall length/barrel length regulations. This one was for Denmark.

GLOCKREAPER Joined Nov 2009 Posts 4364 EE 0% (0) ID, USA	Posted: 5/31/2010 8:54:34 AM EDT [#18]

Stoop Joined Nov 2004 Posts 422 EE 0% (0) NC, USA	Posted: 6/16/2010 3:16:52 PM EDT [#19] [ On the recoil spring assembly, look on the back of the guide rod for a "1". This is the newer rod made from a modified polymer to prevent melting. According to my Glock Armorer Instructor yesterday - the modification is the addition of ground glass.

GLOCKREAPER Joined Nov 2009 Posts 4502 EE 0% (0) ID, USA	Posted: 6/16/2010 4:22:07 PM EDT [#20] Originally Posted By Stoop: According to my Glock Armorer Instructor yesterday - the modification is the addition of ground glass. Now that's a quality post! Thank you.

cedjunior Joined Feb 2009 Posts 1345 EE 0% (0) TX, USA	Posted: 6/16/2010 5:13:58 PM EDT [#21] Originally Posted By Stoop: [ On the recoil spring assembly, look on the back of the guide rod for a "1". This is the newer rod made from a modified polymer to prevent melting. According to my Glock Armorer Instructor yesterday - the modification is the addition of ground glass. I would guess what he meant was glass fiber reinforced.

Unicorn Facta Non Verba Joined Feb 2002 Posts 6028 EE 100% (7) WA, USA	Posted: 6/19/2010 3:37:22 AM EDT [#22] Originally Posted By GLOCKREAPER: http://lsandwick.com/images/glockGen4.jpg Prices went up a little bit a few months ago. I want to say from 398.20 to 425.00 for the standard fixed sight models.
	Store hours 10AM to 6PM Tue-Sat Ph: 253-722-1966 www.surplusammoandarms.com Internet sales, shipping and phone orders Mon-Fri 10AM - 6PM Ph: 253-691-6636 www.surplusammo.com FAX 253-722-1967

GLOCKREAPER Joined Nov 2009 Posts 4537 EE 0% (0) ID, USA	Posted: 6/19/2010 4:35:14 AM EDT [#23] Good update. Thank you.

GLOCKREAPER

Joined Nov 2009
Posts 4648
EE 0% (0)

ID, USA

Posted: 6/28/2010 5:37:35 AM EDT

[#24]

Originally
Posted By ShakenNotStirred:

Based on some of the commentary that this thread has so far received, I
have actually been reluctant to post any report. Glock was gracious
enough to permit us into their headquarters and were (I think)
incredibly forthcoming about our (well, my) questions. Andreas, the
tour guide (one of the international sales directors) said that the
usual questions are things like "how far do they shoot" and other such
non-shooter issues.

I think that the greatest lesson learned from
this trip is that most interwebz-commandoz would be far better served
calling Glock Customer Service for answers to questions than they are
arguing with each other in the ARFCOM Glock Forum, or on Glock Talk.
Further, the interwebz has not, in any way/shape/form, promoted patience
in the market. I truly feel a bit more sympathy for Glock, Magpul,
BCM, Spike's Tactical, Bushmaster, and other firms who have taken the
immature wrath of the interwebz-commandoz.

That said, here are some of my notes, which will
hopefully address the most urgent concerns of the more serious-minded
Glock fans.

––––––––––––––––––––––––––––––––––––––––––––––

Generation
3 vs Generation 4

The terms (Gen1 through
Gen3) were created by the market and Glock adopted it.

There
is absolutely no intention of terminating Gen3 production.

Gen4
was developed because of perceived market demand; Glock does not see a
real LE/Mil need for the Gen4.

Three back strap sizes: none
(small), medium, large.

Redesigned to maintain the same
grip angle as previous generations, to ensure that muscle memory remains
the same to ensure the same pointing characteristics.

2mm
shorter length of pull from the web of the hand.

Texture is
market driven … RTF2 was too rough for many shooters, and hard on LE
uniforms.

Dual springs: intended to cover all ammo types.
This worked for 40, but not for 9mm (which will have two differently
rated spring sets, to cover a wider variety of ammo).

Gen4
availability: 17, 19, 22, 23, 31 are available now. 21, 26, 27, 34,
and 35 are on the way.

Magazines

Glock
is always tweaking their mags due to changes in the ammunition
manufacturing. They recognize the importance of the magazine to
function and take the design VERY seriously (hence the continual
upgrading of followers).

QC with the stamping of the mag
body is one of the most complicated processes they have.

Mag
bodies go through multiple stamping operations (in one machine) and
come from a tape of sheet metal. They wind up looking almost like a
complete mag from a SIG, to include an interlocking rear seam with tack
stamps holding the teeth together (no welding at all).

The
steel is a carbon alloy, not stainless (Edelstahl). However, it
receives an anti-corrosion surface treatment.

The "1" and
"2" on the 40-cal mag bodies indicate certain changes to the geometry of
the mag body's taper and feed lips.

40-cal stick mags
should be available in CONUS as we speak.

No plans to
develop 45-cal stick mags.

I picked up a finished G26 mag
body fresh from the polymer overmolding and finishing machine. It was
very warm to the touch, and ready to be assembled.

Green Polymer:

I picked up a fresh OD Gen3 G17 frame
from the molding machine. It was wet, and quite cool to the touch.
There is no serial number on the plate, but there is a laser code inside
the beavertail area that uniquely ID's the frame for internal control
and inventory.

The OD polymer is not as quite
strong/durable/UV-resistant as black, they recommend black to customers …
the same applies to other manufacturers who use other colors of polymer
(like FDE).

Not many are sold, and this color was
introduced due to a U.S. Army requirement.

If you want a
Gen4 or RTF2 Glock in OD, you need to order 20k units (ha, ha).

Carbine

They
have been working on one (5.56mm) on and off for years.

Corporate
interest is higher now because of the possibility of a new U.S. Army
tender for a carbine.

They have many individual ideas worked
out, but haven't integrated them into one package that meets their
standards for reliability, ease of maintenance/use, and ease/efficiency
of manufacture.

22LR Conversion & Full-Sized
"Slimline"

No 22 conversion will be produced. If Glock
ever produces a 22, it will be a complete gun.

22LR guns are
very difficult to get to run reliably (due to magazine and ammo
considerations). They won't make one until it meets their standards.

There
was a very positive reaction to the possibility of the market seeing a
full-sized, single-stack "Slimline" Glock in 45 Auto.

Indoor
Range

Two lane (each its own complete, sealed tunnel),
underground, industrial range.

Bullet collection is a steel
funnel leading to a snail trap.

Firing fixtures are
available for accuracy testing.

Each pistol fires 7 rounds
(mags are automatically machine loaded for the testers): 2 proof rounds
and five standard pressure rounds for accuracy.

6.5mm rear
sights are standard, but can be swapped for 6.3mm or 6.7mm if tolerances
have stacked and result in high or low groups.

For
demonstration purposes, almost every pistol configuration was on-hand,
and all chamberings of ammunition were available.

Maynard

Shogun Named Marcus

Joined Jun 2001
Posts 7356
EE 100% (145)

OH, USA

Posted: 7/16/2010 4:23:22 PM EDT

[#25]

What is the
BATF points system and how does it affect Glocks?

Many
of the Glock's parts and sometimes the whole gun are dictated or
limited by the BATF's system of "import points". To qualify for import a
pistol must score 75 points based on the following system:

Characteristic	Points
Length: for each 1/4" over 6"	1
Forged steel frame	15
Forged HTS alloy frame	20
Unloaded weight w/mag (per oz.)	1
.22 short and .25 auto	0
.22 LR and 7.65mm to .380 auto	3
9mm parabellum and over	10
Locked breech mechanism	5
Loaded chamber indicator	5
Grip safety	3
Magazine safety	5
Firing pin block or lock	10
External hammer	2
Double action	10
Drift adjustable target sight	5
Click adjustable target sight	10
Target grips	5
Target trigger	2

For example, here is how the G17 scores:

Length (7.28")	5
Weight (24.79oz)	25
Caliber (9mm)	10
Locked breech	5
Firing pin block	10
Double action	10
Target sight	10
Target grips	5
Total	80

Here is how the Glock 26 scores:

Length (6.29")	1
Weight (21.87oz)	22
Caliber (9mm)	10
Locked breech	5
Firing pin block	10
Double action	10
Target sight	10
Target grips	5
Target trigger	2
Total	75

Changes
and features made to Glocks to comply with the BATF rules:

- all models are imported with a cheap click-adjustable rear
sight that is replaced at the factory with the stock sight

- target (grooved) trigger added to compacts &
subcompacts

- target grips added to all models (required for the
subcompacts)

- due to their caliber, .380 autos (G25 & G28) do not
score enough points to be imported

Courtesy of Glockfaq.com

Once we were a Nation of Riflemen

AZYoungGun

Member

Joined Aug 2002
Posts 864
EE 100% (272)

AZ, USA

Posted: 7/18/2010 9:15:58 PM EDT

[#26]

I just got a Gen3 G19 as a gift today that was manufactured in 1998. It came with three "ban" mags (still have the LEO/MIL only stamp on them). Two have "9mm1" on the follower, and one has "9mm3," denoting the changes made as mentioned in the OP. I will try to get some photos up to show the difference in the followers soon and you can add them to the OP as well.

"Our dreams, our desires, and colorful aspirations need to be taken seriously, treated with importance. If you push them aside, you suppress what's best in you, and end up an empty man." -Schiller

COSteve

G20L - 10mm Goodness!

Joined Dec 2005
Posts 6028
EE 100% (10)

CO, USA

Posted: 7/22/2010 1:39:10 PM EDT

[#27]

I noticed that my G21's nose curved up when I
first added my custom 6" slide. You can see it in the picture below.
The front of the frame actually rubbed against the bottom of the slide.

I
fixed it quite easily and permanently. Remove the slide and dip the
first couple of inches of the frame 'nose' (I dipped the entire length
of the light rail) into boiling water for 10-15 seconds then take it
out, turn it over, and press the front flats that curve up together on
your counter top, cutting board, etc., and slightly rock the grip up to
straighten out the front.
If it cools off before you're happy
with it, just repeat the process. You can't hurt the frame material in
210° water but you can soften the front up just enough to push it to a
new set point.
This is what it looked like when I was done.

Note that it's nice and parallel with the slide now and it's stayed that way for over 5 years.

"The greatest threat to our way of life, everything we believe in, the greatest threat to the country put together by the Founding Fathers, is the guy who is sitting in the White House today." - Former US Rep, Tom Tancredo (R) 2010

TexRdnec Smartass Cracker Joined Dec 2002 Posts 14113 EE 100% (96) TX, USA	Posted: 8/23/2010 2:29:26 PM EDT [#28] they won't really go through a metal detector
	Posted By Keith_J: When you think I am mistaken, it is you who are incorrect. Posted By Jarhead_22: When TexRdnec is the voice of moderation, you know you have swerved over the double yellow line and are headed into oncoming traffic.

GLOCKREAPER Joined Nov 2009 Posts 5000 EE 0% (0) ID, USA	Posted: 8/23/2010 10:10:19 PM EDT [#29] Great post!

FailureDrill-P099 Sickboy Joined Dec 2007 Posts 836 EE 100% (53) USA	Posted: 8/24/2010 4:44:54 PM EDT [#30] GLOCKREAPER sugguested I post this for people to see a while ago finally got around to it. Hope this helps people identify the difference in trigger springs Black frame has NY1 you can see its OD green. The OD frame has standard trigger spring.
	Glock and Colt M16/AR15 Armorer Two to the Body, One to the Head!

Henny Member كافر Joined Jun 2001 Posts 4437 EE 100% (2) PA, USA	Posted: 12/24/2010 10:12:49 AM EDT [#31] Coupled with the above photograph, the springs as seen side by side so you can get a perspective of their relative sizes to each other:
	"...But there's also this: there are over 5,000 men in this city, who know that being a policeman is an endless, glamourless, thankless job that's gotta be done. I know it, too, and I'm damn glad to be one of them." Joe Friday

bzltyr Joined Nov 2008 Posts 87 EE 100% (2) OR, USA	Posted: 1/31/2011 10:19:47 PM EDT [#32] Im glad I got the first RTF2 with the sand paper feel and the curved serrations. Sharp looking pistol and feels and shoots great

supremeweasel67 Member Joined Feb 2009 Posts 2058 EE 100% (55) TN, USA	Posted: 2/15/2011 11:49:47 AM EDT [Last Edit: supremeweasel67] [#33] As a new Glock owner this was Very Informational. Don't really plan to change/upgrade anything, except maybe adding NS.
	IIRC , Thanks "Ordinary citizens don't need guns, as their having guns doesn't serve the state."- Heinrich Himmler 'The true Soldier fights not because he hates what is in front of him, but because He loves what is behind him.' -G. K.

Swat_dude Joined Sep 2007 Posts 889 EE 100% (5) AZ, USA	Posted: 6/10/2011 3:48:29 AM EDT [Last Edit: Swat_dude] [#34] DELETED

GLOCKREAPER Joined Nov 2009 Posts 7534 EE 0% (0) ID, USA	Posted: 6/10/2011 12:05:02 PM EDT [#35] Originally Posted By Swat_dude: I looked but I did not see the dates that each Gen was released. I just sold a Glock 22C Gen3 and the buyer seemed shocked when I told him I bought it in 1994. GEN1 1982-1988 GEN2 1988/89-1997/98 GEN3 1997/98-present GEN4 2009-present

Swat_dude

Joined Sep 2007
Posts 891
EE 100% (5)

AZ, USA

Posted: 6/10/2011 12:32:37 PM EDT

[Last Edit: Swat_dude] [#36]

Originally Posted By GLOCKREAPER:

Originally Posted By Swat_dude:
I looked but I did not see the dates that each Gen was released. I just sold a Glock 22C Gen3 and the buyer seemed shocked when I told him I bought it in 1994.

GEN1 1982-1988

GEN2 1988/89-1997/98

GEN3 1997/98-present

GEN4 2009-present

EDIT: My bad. I have owned so many Glocks over the years I got confused. Rather than add another response to thread, I will just state here that I was able to dig out my old receipt and I did in fact purchase it 7/13/98 for $405.00.

GLOCKREAPER

Joined Nov 2009
Posts 7537
EE 0% (0)

ID, USA

Posted: 6/10/2011 8:37:24 PM EDT

[Last Edit: GLOCKREAPER] [#37]

Originally Posted By Swat_dude:
Serial CUH0**, a full three years before your date above.

That's late June-early July, 1998.

Originally Posted By Swat_dude:

The LE only mags that came with were stamped 9-13-94.

That is the date the Crime Bill, AKA "Assault Weapons Ban" went into
effect. It is used to identify post-ban "high capacity" magazines.

GLOCKREAPER Joined Nov 2009 Posts 7563 EE 0% (0) ID, USA	Posted: 6/14/2011 6:27:55 PM EDT [#38] Here is the maintenance section of the owners manual for those that don't have one.

GLOCKREAPER Joined Nov 2009 Posts 7564 EE 0% (0) ID, USA	Posted: 6/14/2011 6:30:58 PM EDT [#39]

smoketheresfire Member Joined Jul 2009 Posts 1342 EE 100% (1) FL, USA	Posted: 6/25/2011 1:50:07 PM EDT [Last Edit: smoketheresfire] [#40] Space reserved for later.

GLOCKREAPER DVC Joined Nov 2009 Posts 7818 EE 0% (0) ID, USA	Posted: 7/13/2011 9:47:55 PM EDT [#41] The early "wasps tail" slide lock spring (left) is know to occasionally break, causing the slide assembly to slide off when the trigger is pulled. In the late '90's, Glock modified it by making it full thickness and breakage with the new slide lock spring (right) is no longer a problem.
	This post brought to you by ThreeMike.

Chevy_Muscle Joined Jul 2007 Posts 14 EE 100% (5) TX, USA	Posted: 8/11/2011 3:44:35 PM EDT [#42] Sorry for the stupid question but my RTF2 pictured below is a Gen3 correct? (not Gen4)

DD1801 The bottled beer taste, in a can. Joined Mar 2005 Posts 8894 EE 100% (15) OK, USA	Posted: 8/11/2011 9:00:14 PM EDT [#43] Originally Posted By Chevy_Muscle: Sorry for the stupid question but my RTF2 pictured below is a Gen3 correct? (not Gen4) http://i176.photobucket.com/albums/w194/ChevyMuscle454ss/Glock_RTF2.jpg Yes sir, gen3. Looks great. Love the RTF2 and the fish gills.
	~~Free Rodent!~~ [img]icon_smile_cool.gif[/img] Boycotter of Bushmaster Firearms http://www.ar15.com/forums/topic.html?b=2&f=28&t=203452

GLOCKREAPER DVC Joined Nov 2009 Posts 8031 EE 0% (0) ID, USA	Posted: 8/12/2011 6:23:08 AM EDT [#44] Originally Posted By Chevy_Muscle: Sorry for the stupid question but my RTF2 pictured below is a Gen3 correct? (not Gen4) Yes, early GEN3 RTF2.
	This post brought to you by ThreeMike.

MTUSA Glockaholic... Joined Nov 2002 Posts 16611 EE 100% (1) TX, USA	Posted: 9/17/2011 9:47:56 PM EDT [#45] Originally Posted By JustinOK34: Originally Posted By Chevy_Muscle: Sorry for the stupid question but my RTF2 pictured below is a Gen3 correct? (not Gen4) http://i176.photobucket.com/albums/w194/ChevyMuscle454ss/Glock_RTF2.jpg Yes sir, gen3. Looks great. Love the RTF2 and the fish gills. I do too. I would love to find a G21 in that config...
	“Government is not reason. It is not eloquence. Government is force; like fire it is a dangerous servant -- and a fearful master.” —George Washington, 1797 Money only magnifies the asshole you already are...SevenMaryThree

That-Guy67

Joined Jan 2011
Posts 84
EE 50% (2)

FL, USA

Posted: 12/1/2011 11:30:41 AM EDT

[#46]

I know this isn't vital info but you CANNOT convert a glock 17-19-26 into a 22-23-27 the larger barrel will not fit into the slide
I took a buddy shooting and he shot my 23 converted in both 9 and 40 and decided thats what he wanted so when he went to buy one the store clerk told him the only difference in the 23 and 19 is one came with a 9barrel te other with a 40 so he bought the 19 and cannot convert it

coctailer Member Joined Feb 2007 Posts 7669 EE 100% (298) OR, USA	Posted: 12/25/2011 10:52:27 AM EDT [#47] Pic I took at IWA in NURNBERG.
	Run with scissors!!!!

EzGoingKev

Joined Feb 2009
Posts 408
EE 100% (20)

MA, USA

Posted: 3/3/2012 2:30:03 PM EDT

[Last Edit: EzGoingKev] [#48]

Originally Posted By EdgecrusherXES_45:
Now we come to the trigger connectors Glock makes a variety of different trigger options.

Glock offers a 8#, 5.5#(stock weight), and 3.5# connector (actually 4.5#)

It should be noted that Glock also has the "Dot" connector that I believe has started to come standard in the Gen 4's.

Although Glock only recommends it for the Gen 4 it is being installed in the older pistols and IMO gives the best trigger I have tried so far.

voyager4520 Joined Aug 2011 Posts 412 EE 0% (0) CO, USA	Posted: 10/5/2012 1:38:46 PM EDT [#49] I found a website that has pretty up-to-date serial number prefixes unlike the dead GlockTalk serial number thread: http://www.stakhaus.com/

AcuraGlass Joined Jan 2008 Posts 81 EE 100% (42) VA, USA	Posted: 2/23/2013 1:27:49 PM EDT [#50] A magazine comment/question: I have a G17 magazine that is similar to your second of 8 magazines shown on page one. It has a floorplate with no Glock logo. The floorplate does not accept an insert. Any idea when the floorplates started getting the logo on them?

Glock Information (Page 2 of 3)

Handguns » Glock

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us