User Panel
User Panel
User Panel
|
Posted: 1/14/2015 6:10:12 PM EDT
[Last Edit: GL0CK]
Please post photos of your DIY stipple and how you achieved the end result, or who did the work for you.
I went at mine after 2 Budweisers, a Walmart Solder gun, and a Dremel. I started with a fine point solder tip, lightly laying at a sight angle int the material until I got the depth I was after (practice on Pmags), The undercutting I used a Dremel large sanding wheel, the one where you slide the round sand tube and tighten down to expand to the belt. I slightly allowed the weight to take material up, and began to form the shape I was after. It was nasty looking, dont worry. You then gradually go higher in grit until you feel it is smooth enough to go at it with a polishing wheel. The mag release I used a combination of a few sanding stone shapes to achieve the depth. Be sure while trying these modifications you know how much material you have to work with. Cerakote done by Caleb at Hudsonville Arms. The slide is Burnt Bronze and the Frame is Graphite Black/ Satin Aluminum mix. 
|
|
|
|
OK, USA
|
Posted: 1/14/2015 8:15:45 PM EDT
[#1]
Looks dam nice!
|
|
|
|
Posted: 1/14/2015 8:53:04 PM EDT
[#2]
I like that texture. How'd you do it?
|
|
|
|
|
Posted: 1/14/2015 9:41:21 PM EDT
[#3]
Is the slide gold metallic flake?
|
|
|
|
|
Posted: 1/14/2015 10:18:39 PM EDT
[#4]
Looks like burnt bronze cerakote?
|
|
|
|
VA, USA
|
Posted: 1/14/2015 10:26:34 PM EDT
[#5]
That looks great. Good job!!!
|
|
|
MI, USA
|
Posted: 1/14/2015 10:54:49 PM EDT
[#6]
Mine's not the prettiest but it grips very well and I much prefer it to the factory grip. I just used a dremel to smooth the back of the grip and remove the finger grooves before stippling all the way around it. Gotta have them index points.
|
|
|
|
Posted: 1/14/2015 11:07:00 PM EDT
[#7]
I normally do not like stippling but that looks BADASS. Good job.
|
|
|
|
|
Posted: 1/14/2015 11:11:26 PM EDT
[#8]
I really wouldn't call this stippling. I was trying to match the texture on the side panels as close as I could. I did it with a small ball mill in a dremel.
|
|
|
|
|
Posted: 1/15/2015 1:38:22 AM EDT
[Last Edit: Alaskacajun]
[#9]
So I bought this G19 a couple weeks ago... and as soon as I got it home I did the trigger guard undercut, threw on a set of Meprolights and ordered a Grip Force Adapter. The I went and bought a wood burner from the local craft store and stippled it... this was my first attempt and it took me about an hour, also while I was stripping it down I scalloped out the mag release a little, and cut off most of the finger bumps... brought it to the range tonight and put 200 rounds through it. It's a shooter!
- Clint |
|
|
|
NJ, USA
|
Posted: 1/15/2015 6:54:32 AM EDT
[Last Edit: 80sgyrene]
[#10]
A 34 and a 17/19(or 19L) hybrid. I squared off the trigger guards, added gen 4 mag releases, and did a slight stipple job to both. Heinie's on both of them. |
|
|
|
Posted: 1/15/2015 10:21:38 AM EDT
[#11]
Quote HistoryOriginally Posted By N4sty_N4te:
Mine's not the prettiest but it grips very well and I much prefer it to the factory grip. I just used a dremel to smooth the back of the grip and remove the finger grooves before stippling all the way around it. Gotta have them index points. https://farm8.staticflickr.com/7539/16142521305_311439765e_c.jpg Thanks looks clean. I like it. |
|
|
|
|
Posted: 1/15/2015 10:53:41 AM EDT
[#12]
 _MG_6161 by 4DAIVIPAI2K5, on Flickr
 _MG_6160 by 4DAIVIPAI2K5, on Flickr
 Range time by 4DAIVIPAI2K5, on Flickr
|
|
|
|
|
Posted: 1/15/2015 11:36:34 AM EDT
[Last Edit: GL0CK]
[#13]
Are those your work?
|
|
|
|
MN, USA
|
Posted: 1/15/2015 11:40:28 AM EDT
[#14]
I'm not a fan of Stripling and could never bring myself to do that to a Glock but I have to say that is the nicest job I have seen. I like that you stayed to the normal area of the grip so it looks factory but still has a more aggressive grip. Trigger guard looks great also. I sort of get the trigger guard as it can rub you in the wrong place sometimes.
Great work. |
|
|
|
Posted: 1/15/2015 2:40:48 PM EDT
[#15]
Undercuts done by me with sandpaper wrapped tightly around a pen.   |
|
|
|
|
Posted: 1/15/2015 3:31:49 PM EDT
[#16]
Quote HistoryOriginally Posted By GL0CK:
https://farm8.staticflickr.com/7554/15834757320_cd0eea55a6_z.jpgAre those your work? Quote HistoryOriginally Posted By GL0CK:
https://farm8.staticflickr.com/7554/15834757320_cd0eea55a6_z.jpgAre those your work? Originally Posted By G35MN:
I'm not a fan of Stripling and could never bring myself to do that to a Glock but I have to say that is the nicest job I have seen. I like that you stayed to the normal area of the grip so it looks factory but still has a more aggressive grip. Trigger guard looks great also. I sort of get the trigger guard as it can rub you in the wrong place sometimes. Great work. My buddy did them, we are looking on getting a FFL so he can get guns and I can get firearms to mold for holsters. |
|
|
|
|
Posted: 1/15/2015 3:39:20 PM EDT
[Last Edit: Blackout762]
[#17]
Quote HistoryOriginally Posted By 80sgyrene:
<a href="http://s311.photobucket.com/user/Tonecod/media/glocks001_zps48ec2555.jpg.html" target="_blank">http://i311.photobucket.com/albums/kk462/Tonecod/glocks001_zps48ec2555.jpg</a> A 34 and a 17/19(or 19L) hybrid. I squared off the trigger guards, added gen 4 mag releases, and did a slight stipple job to both. Heinie's on both of them. Any info on the Gen4 mag releases on the Gen3's? ETA: nvm found it Here |
|
|
|
CO, USA
|
Posted: 1/15/2015 3:44:51 PM EDT
[#18]
|
|
|
|
Posted: 1/15/2015 3:52:01 PM EDT
[#19]
OP, that's the ONLY stipple job I've ever seen that I actually like.
|
|
|
|
|
Posted: 1/15/2015 3:58:52 PM EDT
[#20]
Quote HistoryOriginally Posted By M82Assault:
OP, that's the ONLY stipple job I've ever seen that I actually like. Wow. Thanks man. Another member stated he liked the fact that it stayed inside factory grip pattern. That was my sole intention was to keep the factory Glock look. |
|
|
|
IL, USA
|
Posted: 1/15/2015 4:16:26 PM EDT
[#21]
Very nice stipple jobs!!!
|
|
|
AZ, USA
|
Posted: 1/15/2015 7:10:39 PM EDT
[Last Edit: TSR2922]
[#22]
Glock 27
Work done by MANGRIPS @ ATTACTICAL |
|
|
|
Posted: 1/16/2015 10:40:22 AM EDT
[Last Edit: Trimdad]
[#23]
Well I gave my old first gen 26 a overhaul .
First I shot the slide with norrells moly resin- stainless. I shot the barrel with norrells socom black, I Cut the finger reliefs using a dremel with a 120 grit wheel and hand sanding. Still have a little more to go. The stippling was pretty basic- advice- don't buy a cordless Soder Gun, it took 12 batteries to get this done!! I think it turned out pretty good. 
Enjoy |
|
|
|
|
Posted: 1/16/2015 10:52:39 AM EDT
[#24]
Quote HistoryOriginally Posted By BBOHACH:
<a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg</a><a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg</a> Coffee and guns <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg</a> <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg</a> That is impressive, how did you achieve the texture? REMEMBER, Please list how you did it, and/or who did the work! |
|
|
|
CO, USA
|
Posted: 1/16/2015 11:18:24 AM EDT
[Last Edit: BBOHACH]
[#25]
Quote HistoryOriginally Posted By GL0CK:
That is impressive, how did you achieve the texture? REMEMBER, Please list how you did it, and/or who did the work! Quote HistoryOriginally Posted By GL0CK:
Originally Posted By BBOHACH:
<a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg</a><a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg</a> Coffee and guns <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg</a> <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg</a> That is impressive, how did you achieve the texture? REMEMBER, Please list how you did it, and/or who did the work! It was done by me. Just did it the cheap way like everyone else with a dremel and a cheap iron from Wal-Mart.
|
|
|
|
Posted: 1/16/2015 11:49:10 AM EDT
[#26]
Quote HistoryOriginally Posted By BBOHACH:
<a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg</a><a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg</a> Coffee and guns <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg</a> <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg</a> I want a 19 set up JUST like that. |
|
|
|
CO, USA
|
Posted: 1/16/2015 12:58:04 PM EDT
[#27]
Quote HistoryOriginally Posted By gotuonpaper:
I want a 19 set up JUST like that. Quote HistoryOriginally Posted By gotuonpaper:
Originally Posted By BBOHACH:
<a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg</a><a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg</a> Coffee and guns <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg</a> <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg</a> I want a 19 set up JUST like that. DPcustomworks did the slide work. Tell him Briar sent you. |
|
|
OH, USA
|
Posted: 1/16/2015 1:06:48 PM EDT
[#28]
Salient Arms Int. tier hybrid, all work done by them.
|
|
|
|
Posted: 1/16/2015 1:37:51 PM EDT
[#29]
Quote HistoryOriginally Posted By OneRanger:
Salient Arms Int. tier hybrid, all work done by them. http://photos-c.ak.instagram.com/hphotos-ak-xpa1/t51.2885-15/928900_367591380089466_2091753579_n.jpg http://photos-c.ak.instagram.com/hphotos-ak-xaf1/t51.2885-15/10817865_395969050558162_1631873395_n.jpg Salient seems priced at a premium... Is it worth it? Very nice work. |
|
|
|
|
Posted: 1/16/2015 3:16:48 PM EDT
[Last Edit: TheJeanyus]
[#30]
|
|
|
|
OH, USA
|
Posted: 1/16/2015 4:36:13 PM EDT
[Last Edit: OneRanger]
[#31]
Quote HistoryOriginally Posted By GL0CK:
Salient seems priced at a premium... Is it worth it? Very nice work. Quote HistoryOriginally Posted By GL0CK:
Originally Posted By OneRanger:
Salient Arms Int. tier hybrid, all work done by them. http://photos-c.ak.instagram.com/hphotos-ak-xpa1/t51.2885-15/928900_367591380089466_2091753579_n.jpg http://photos-c.ak.instagram.com/hphotos-ak-xaf1/t51.2885-15/10817865_395969050558162_1631873395_n.jpg Salient seems priced at a premium... Is it worth it? Very nice work. This is why they need a website...when SAI comes to mind most folks think holy shit a $3000 glock WTF?! Not always the case, mine is the base model (tier 3) with their top line internals (tier 1), except the barrel (still OEM). I got the whole tier "hybrid" package, gun included, directly from SAI for $1700ish, the work is incredible and totally worth it (my opinion). I couldn't be more happy with the finished product. The only gripe I have was the wait time. You can send in your shit for just the frame work or slide work, whatever you want, you don't have to buy the whole kit like I did. I sent a G19 off to them for just the full frame work like you see on my G17 pictured, for $250. |
|
|
TX, USA
|
Posted: 1/16/2015 9:07:51 PM EDT
[#32]
26 G4
|
|
|
IN, USA
|
Posted: 1/17/2015 3:49:52 AM EDT
[#33]
I made a build thread in the Glock forum, but in case that gets lost, I present my custom grip. Not stippling though. I did the undercuts and groove removal with a dremel, then taped it up and coated it with JB Weld. Sprinkled 60 grit silicon carbide over it, and let it dry. Then, hit it with the Cerakote. In this case, undercoat of burnt bronze followed by a light dusting of black that was wiped away to give it the distressed look. I think that helps keep the grip together. I haven't seen any of it come off at all so far, not that I've had it for very long... I stippled my G20, and like the silicon carbide a lot more. It's way grippier. I had concerns with it rubbing on me if it's in a holster, but after the Cerakote was added over top, it takes a lot of the bite away.
|
|
|
|
Posted: 1/17/2015 2:47:39 PM EDT
[#34]
I recently did my G26 and G19 both Gen 3. Used a fine point solder tip with very light touch. Tried to visually match the factory texture as close as I could and I only worked on surfaces that won't touch my skin if I am carrying concealed under my T-Shirt. The texture is very fine but adds an extraordinary amount of grip. I also did the base of one extended mag on my 26 but I left one smooth for CCW. On both I did a little patch in the Thumb Recess area and a little patch just in front of the take down lever. Also put some texture on the factory backstrap texture. G26 Finger Grooves...   G26 thumb recess...  G26 Backstrap...  G19 Finger Grooves...  G19 Thumb Recess...  G19 Backstrap...  |
|
|
|
|
Posted: 1/17/2015 5:52:23 PM EDT
[#35]
Only frame mod is an undercut. Made a huge difference for me. I used a trusty dremel tool
 IMG_2078 by KiowaDriver, on Flickr
|
|
|
|
|
Posted: 1/17/2015 7:39:15 PM EDT
[#36]
Nice work.
|
|
|
|
|
Posted: 1/18/2015 12:24:45 AM EDT
[#37]
Guys, I set the toggle on this thread so it won't fall into the archives.
|
|
|
|
USA
|
Posted: 1/18/2015 4:52:15 AM EDT
[Last Edit: Maiden316]
[#38]
Nice looking gun OP. Some good stuff in here. Here are a few of mine I've done:
G41 
G17 
|
|
|
|
Posted: 1/18/2015 10:11:57 AM EDT
[#39]
Quote HistoryOriginally Posted By Maiden316:
Nice looking gun OP. Some good stuff in here. Here are a few of mine I've done: G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zps85e3b0da.jpg G17 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsea8a5cff.jpg Thanks. That is great work, how did you get such straight edges without hiccup? |
|
|
|
MI, USA
|
Posted: 1/18/2015 11:35:37 AM EDT
[#40]
Quote HistoryOriginally Posted By Maiden316:
Nice looking gun OP. Some good stuff in here. Here are a few of mine I've done: G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zps85e3b0da.jpg G17 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsea8a5cff.jpg That is damn good. I take it that you had to sand down the factory texture first? |
|
|
MI, USA
|
Posted: 1/18/2015 1:00:30 PM EDT
[#41]
Those of you that have done this yourself, did you sand down the factory checkering or heat it up and flatten it out then sand?
|
|
|
MI, USA
|
Posted: 1/18/2015 7:31:11 PM EDT
[#42]
Quote HistoryOriginally Posted By watertower:
Those of you that have done this yourself, did you sand down the factory checkering or heat it up and flatten it out then sand? I sanded it down, so it actually gives it a slight grip reduction. |
|
|
USA
|
Posted: 1/19/2015 12:44:52 AM EDT
[#43]
Quote HistoryOriginally Posted By BBOHACH:
<a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/IMAG10212_zps0yoj8p4b.jpg</a><a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/65E7F8B4-48E2-4AFC-945C-CF02BECAF33B_zpsdclimla9.jpg</a> Coffee and guns <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/ECAB79F3-D2AA-4F09-8688-A0CFE3292A47_zps0kbzgcmr.jpg</a> <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/2014-03/520D01FE-E180-4365-8D7A-D4A7BF3E06EF_zps4b3thwbi.jpg</a> Diggin the look of that man I like the way you went around the thumb groove |
|
|
USA
|
Posted: 1/19/2015 12:46:21 AM EDT
[#44]
Quote HistoryOriginally Posted By N4sty_N4te:
That is damn good. I take it that you had to sand down the factory texture first? Quote HistoryOriginally Posted By N4sty_N4te:
Originally Posted By Maiden316:
Nice looking gun OP. Some good stuff in here. Here are a few of mine I've done: G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zps85e3b0da.jpg G17 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsea8a5cff.jpg That is damn good. I take it that you had to sand down the factory texture first? Thanks man. Used painters tape for the lines. |
|
|
USA
|
Posted: 1/19/2015 12:49:01 AM EDT
[Last Edit: Maiden316]
[#45]
Quote HistoryOriginally Posted By N4sty_N4te:
That is damn good. I take it that you had to sand down the factory texture first? Quote HistoryOriginally Posted By N4sty_N4te:
Originally Posted By Maiden316:
Nice looking gun OP. Some good stuff in here. Here are a few of mine I've done: G41 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zps85e3b0da.jpg G17 http://i1382.photobucket.com/albums/ah270/Maiden316/Mobile%20Uploads/image_zpsea8a5cff.jpg That is damn good. I take it that you had to sand down the factory texture first? Thanks yeah I sanded the factory texture off. You can just smooth it over with the soldering iron too. For the 17 I cut the dimples off with a pocket knife and then sanded haha. Better just to use the dremel though. |
|
|
|
Posted: 1/19/2015 7:29:02 AM EDT
[#46]
I forget. Whats the point of the undercut again?
Thanks and nice guns.
|
|
|
|
MI, USA
|
Posted: 1/19/2015 8:11:15 AM EDT
[#47]
prevents your finger from getting rubbed raw
|
|
|
TX, USA
|
Posted: 1/19/2015 9:34:05 AM EDT
[#48]
OOOO reduction and texturing pron.....I'll play.
TXPO |
|
|
|
Posted: 1/19/2015 10:38:07 AM EDT
[#49]
Quote HistoryOriginally Posted By Texaspo:
OOOO reduction and texturing pron.....I'll play. http://i238.photobucket.com/albums/ff295/Texaspoff/DSC_0019_zps263c08b4.jpg http://i238.photobucket.com/albums/ff295/Texaspoff/6b253d42-b168-4ccb-a08c-710cfb688b1f_zps6ed90889.jpg http://i238.photobucket.com/albums/ff295/Texaspoff/DSC_0003_zps55a1d7fb.jpg http://i238.photobucket.com/albums/ff295/Texaspoff/DSC_0463.jpg http://i238.photobucket.com/albums/ff295/Texaspoff/DSC_1341.jpg TXPO Very nice work... 19 is impressive. |
|
|
|
MI, USA
|
Posted: 1/19/2015 1:50:33 PM EDT
[#50]
Got my dream gun over the weekend and quickly proceeded to chop up the frame. I went to the range to test fire it on Saturday and asked myself how my friends can deal with standard Glock grips. After 3-4 hours of work on Sunday, it now fits like a glove.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
